Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 23 9月, 2014 7 次提交
  3. 20 9月, 2014 1 次提交
  5. 13 8月, 2014 1 次提交
  7. 02 8月, 2014 1 次提交
  9. 02 6月, 2014 2 次提交
  11. 30 5月, 2014 1 次提交
    • J
      IB/mlx4: SET_PORT called by mlx4_ib_modify_port should be wrapped · 61565013
      由 Jack Morgenstein 提交于 
      mlx4_ib_modify_port is invoked in IB for resetting the Q_Key violations
counters and for modifying the IB port capability flags.

For example, when opensm is started up on the hypervisor,
mlx4_ib_modify_port is called to set the port's IsSM flag.

In multifunction mode, the SET_PORT command used in this flow should
be wrapped (so that the PF port capability flags are also tracked,
thus enabling the aggregate of all the VF/PF capability flags to be
tracked properly).

The procedure mlx4_SET_PORT() in main.c is also renamed to mlx4_ib_SET_PORT()
to differentiate it from procedure mlx4_SET_PORT() in port.c.
mlx4_ib_SET_PORT() is used exclusively by mlx4_ib_modify_port().

Finally, the CM invokes ib_modify_port() to set the IsCMSupported flag
even when running over RoCE.  Therefore, when RoCE is active,
mlx4_ib_modify_port should return OK unconditionally (since the
capability flags and qkey violations counter are not relevant).
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      61565013
  13. 17 5月, 2014 1 次提交
    • M
      IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes · 9433c188
      由 Matan Barak 提交于 
      When we receive a netdev event indicating a netdev change and/or
a netdev address change, we must change the MAC index used by the
proxy QP1 (in the QP context), otherwise RoCE CM packets sent by the
VF will not carry the same source MAC address as the non-CM packets.

We use the UPDATE_QP command to perform this change.

In order to avoid modifying a QP context based on netdev event,
while the driver attempts to destroy this QP (e.g either the mlx4_ib
or ib_mad modules are unloaded), we use mutex locking in both flows.

Since the relevant mlx4 proxy GSI QP is created indirectly by the
mad module when they create their GSI QP, the mlx4 didn't need to
keep track on that QP prior to this change.

Now, when QP modifications are needed to this QP from within the
driver, we added refernece to it.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9433c188
  15. 02 4月, 2014 2 次提交
  17. 21 3月, 2014 2 次提交
    • M
      net/mlx4: Adapt code for N-Port VF · 449fc488
      由 Matan Barak 提交于 
      Adds support for N-Port VFs, this includes:
1. Adding support in the wrapped FW command
	In wrapped commands, we need to verify and convert
	the slave's port into the real physical port.
	Furthermore, when sending the response back to the slave,
	a reverse conversion should be made.
2. Adjusting sqpn for QP1 para-virtualization
	The slave assumes that sqpn is used for QP1 communication.
	If the slave is assigned to a port != (first port), we need
	to adjust the sqpn that will direct its QP1 packets into the
	correct endpoint.
3. Adjusting gid[5] to modify the port for raw ethernet
	In B0 steering, gid[5] contains the port. It needs
	to be adjusted into the physical port.
4. Adjusting number of ports in the query / ports caps in the FW commands
	When a slave queries the hardware, it needs to view only
	the physical ports it's assigned to.
5. Adjusting the sched_qp according to the port number
	The QP port is encoded in the sched_qp, thus in modify_qp we need
	to encode the correct port in sched_qp.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      449fc488
    • M
      IB/mlx4_ib: Adapt code to use caps.num_ports instead of a constant · 82373701
      由 Matan Barak 提交于 
      Some code in the mlx4 IB driver stack assumed MLX4_MAX_PORTS ports.

Instead, we should only loop until the number of actual ports in i
the device, which is stored in dev->caps.num_ports.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      82373701
  19. 13 3月, 2014 1 次提交
  21. 26 2月, 2014 1 次提交
  23. 14 2月, 2014 7 次提交
  25. 20 1月, 2014 1 次提交
  27. 19 1月, 2014 1 次提交
    • M
      IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID table · d487ee77
      由 Moni Shoua 提交于 
      Currently, the mlx4 driver set IBoE (RoCE) gids to encode related
Ethernet netdevice interface MAC address and possibly VLAN id.

Change this scheme such that gids encode interface IP addresses (both
IP4 and IPv6).

This requires learning the IP addresses which are of use by a
netdevice associated with the HCA port, formatting them to gids and
adding them to the port gid table.  Furthermore, events of add and
delete address are caught to maintain the gid table accordingly.

Associated IP addresses may belong to a master of an Ethernet
netdevice on top of that port so this should be considered when
building and maintaining the gid table.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      d487ee77
  29. 15 1月, 2014 3 次提交
  31. 18 11月, 2013 2 次提交
    • M
      IB/core: Re-enable create_flow/destroy_flow uverbs · 69ad5da4
      由 Matan Barak 提交于 
      This commit reverts commit 7afbddfa ("IB/core: Temporarily disable
create_flow/destroy_flow uverbs").  Since the uverbs extensions
functionality was experimental for v3.12, this patch re-enables the
support for them and flow-steering for v3.13.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      69ad5da4
    • Y
      IB/core: extended command: an improved infrastructure for uverbs commands · f21519b2
      由 Yann Droneaud 提交于 
      Commit 400dbc96 ("IB/core: Infrastructure for extensible uverbs
commands") added an infrastructure for extensible uverbs commands
while later commit 436f2ad0 ("IB/core: Export ib_create/destroy_flow
through uverbs") exported ib_create_flow()/ib_destroy_flow() functions
using this new infrastructure.

According to the commit 400dbc96, the purpose of this
infrastructure is to support passing around provider (eg. hardware)
specific buffers when userspace issue commands to the kernel, so that
it would be possible to extend uverbs (eg. core) buffers independently
from the provider buffers.

But the new kernel command function prototypes were not modified to
take advantage of this extension. This issue was exposed by Roland
Dreier in a previous review[1].

So the following patch is an attempt to a revised extensible command
infrastructure.

This improved extensible command infrastructure distinguish between
core (eg. legacy)'s command/response buffers from provider
(eg. hardware)'s command/response buffers: each extended command
implementing function is given a struct ib_udata to hold core
(eg. uverbs) input and output buffers, and another struct ib_udata to
hold the hw (eg. provider) input and output buffers.

Having those buffers identified separately make it easier to increase
one buffer to support extension without having to add some code to
guess the exact size of each command/response parts: This should make
the extended functions more reliable.

Additionally, instead of relying on command identifier being greater
than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on
unused bits in command field: on the 32 bits provided by command
field, only 6 bits are really needed to encode the identifier of
commands currently supported by the kernel. (Even using only 6 bits
leaves room for about 23 new commands).

So this patch makes use of some high order bits in command field to
store flags, leaving enough room for more command identifiers than one
will ever need (eg. 256).

The new flags are used to specify if the command should be processed
as an extended one or a legacy one. While designing the new command
format, care was taken to make usage of flags itself extensible.

Using high order bits of the commands field ensure that newer
libibverbs on older kernel will properly fail when trying to call
extended commands. On the other hand, older libibverbs on newer kernel
will never be able to issue calls to extended commands.

The extended command header includes the optional response pointer so
that output buffer length and output buffer pointer are located
together in the command, allowing proper parameters checking. This
should make implementing functions easier and safer.

Additionally the extended header ensure 64bits alignment, while making
all sizes multiple of 8 bytes, extending the maximum buffer size:

                             legacy      extended

   Maximum command buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)
  Maximum response buffer:  256KBytes   1024KBytes (512KBytes + 512KBytes)

For the purpose of doing proper buffer size accounting, the headers
size are no more taken in account in "in_words".

One of the odds of the current extensible infrastructure, reading
twice the "legacy" command header, is fixed by removing the "legacy"
command header from the extended command header: they are processed as
two different parts of the command: memory is read once and
information are not duplicated: it's making clear that's an extended
command scheme and not a different command scheme.

The proposed scheme will format input (command) and output (response)
buffers this way:

- command:

  legacy header +
  extended header +
  command data (core + hw):

    +----------------------------------------+
    | flags     |   00      00    |  command |
    |        in_words    |   out_words       |
    +----------------------------------------+
    |                 response               |
    |                 response               |
    | provider_in_words | provider_out_words |
    |                 padding                |
    +----------------------------------------+
    |                                        |
    .              <uverbs input>            .
    .              (in_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .             <provider input>           .
    .          (provider_in_words * 8)       .
    |                                        |
    +----------------------------------------+

- response, if present:

    +----------------------------------------+
    |                                        |
    .          <uverbs output space>         .
    .             (out_words * 8)            .
    |                                        |
    +----------------------------------------+
    |                                        |
    .         <provider output space>        .
    .         (provider_out_words * 8)       .
    |                                        |
    +----------------------------------------+

The overall design is to ensure that the extensible infrastructure is
itself extensible while begin more reliable with more input and bound
checking.

Note:

The unused field in the extended header would be perfect candidate to
hold the command "comp_mask" (eg. bit field used to handle
compatibility).  This was suggested by Roland Dreier in a previous
review[2].  But "comp_mask" field is likely to be present in the uverb
input and/or provider input, likewise for the response, as noted by
Matan Barak[3], so it doesn't make sense to put "comp_mask" in the
header.

[1]:
http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com

[2]:
http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com

[3]:
http://marc.info/?i=525C1149.6000701@mellanox.comSigned-off-by: NYann Droneaud <ydroneaud@opteya.com>
Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com

[ Convert "ret ? ret : 0" to the equivalent "ret".  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      f21519b2
  33. 08 11月, 2013 1 次提交
  35. 05 11月, 2013 1 次提交
    • J
      mlx4: Structures and init/teardown for VF resource quotas · 5a0d0a61
      由 Jack Morgenstein 提交于 
      This is step #1 for implementing SRIOV resource quotas for VFs.

Quotas are implemented per resource type for VFs and the PF, to prevent
any entity from simply grabbing all the resources for itself and leaving
the other entities unable to obtain such resources.

Resources which are allocated using quotas:  QPs, CQs, SRQs, MPTs, MTTs, MAC,
                                             VLAN, and Counters.

The quota system works as follows:
Each entity (VF or PF) is given a max number of a given resource (its quota),
and a guaranteed minimum number for each resource (starvation prevention).

For QPs, CQs, SRQs, MPTs and MTTs:
50% of the available quantity for the resource is divided equally among
the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module
parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool.
The other 50% is the "free pool", allocated on a first-come-first-serve basis.
For each VF/PF, resources are first allocated from its "guaranteed-minimum"
pool. When that pool is exhausted, the driver attempts to allocate from
the resource "free-pool".

The quota (i.e., max) for the VFs and the PF is:
  The free-pool amount (50% of the real max) + the guaranteed minimum

For MACs:
  Guarantee 2 MACs per VF/PF per port. As a result, since we have only
  128 MACs per port, reduce the allowable number of VFs from 64 to 63.
  Any remaining MACs are put into a free pool.

For VLANs:
  For the PF, the per-port quota is 128 and guarantee is 64
     (to allow the PF to register at least a VLAN per VF in VST mode).
  For the VFs, the per-port quota is 64 and the guarantee is 0.
      We assume that VGT VFs are trusted not to abuse the VLAN resource.

For Counters:
  For all functions (PF and VFs), the quota is 128 and the guarantee is 0.

In this patch, we define the needed structures, which are added to the
resource-tracker struct.  In addition, we do initialization
for the resource quota, and adjust the query_device response to use quotas
rather than resource maxima.

As part of the implementation, we introduce a new field in
mlx4_dev: quotas.  This field holds the resource quotas used
to report maxima to the upper layers (ib_core, via query_device).

The HCA maxima of these values are passed to the VFs (via
QUERY_HCA) so that they may continue to use these in handling
QPs, CQs, SRQs and MPTs.
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5a0d0a61
  37. 22 10月, 2013 1 次提交
  39. 29 8月, 2013 1 次提交
  41. 29 5月, 2013 1 次提交
  43. 26 2月, 2013 1 次提交