- 01 11月, 2012 9 次提交
-
-
由 Alan Stern 提交于
This patch (as1624) prepares ehci-hcd for being split up into a core library and separate platform driver modules. A generic ehci_hc_driver structure is created, containing all the "standard" values, and a new mechanism is added whereby a driver module can specify a set of overrides to those values. In addition the ehci_setup(), ehci_suspend(), and ehci_resume() routines need to be EXPORTed for use by the drivers. As a side effect of this change, a few routines no longer need to be marked __maybe_unused. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
The exception is needed on big endian systems too. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
No need for a vendor specific probe exception just to match on the interface class. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
Matching on device and interface class with with unspecified subclass and protocol is sometimes useful. This is slightly different from USB_DEVICE_AND_INTERFACE_INFO which requires the full interface class/subclass/protocol triplet. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Bjørn Mork 提交于
There are many modems in addition to the D-Link DWM 652 exposing the CD interface in modem mode, and some expose an integrated card reader as well. Always ignore these interfaces. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1622) removes the USB-2.1 Link Power Management code from the ehci-hcd driver. This code was never integrated with usbcore, it is full of bugs, and it was not getting used by anybody. However, the debugging code for dumping the LPM-related fields in the EHCI registers is left in place. In theory it might be useful to see these values, even though we don't use them. This essentially amounts to a partial revert of commit aa4d8342 (USB: EHCI: EHCI 1.1 addendum: preparation) and an almost full revert of commit 48f24970 (USB: EHCI: EHCI 1.1 addendum: Basic LPM feature support) plus its follow-ons. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alan Stern 提交于
This patch (as1621) removes the limit on the number of loops allowed in hub_tt_work(). The value is arbitrary, and it's silly to have a limit in the first place -- anything beyond the limit would not get handled. Besides, it's most unlikely that we'll ever need to clear more than a couple of TT buffers at any time. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove all MODULE_VERSION macros and driver-version information (except for garmin_gps which uses it in a status reply). It is the kernel version that matters and not some private version scheme which rarely even gets updated. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 10月, 2012 14 次提交
-
-
由 Jingoo Han 提交于
When rts51x_read_status() returns USB_STOR_TRANSPORT_ERROR, an error happens. This patch fixes build warning as below: drivers/usb/storage/realtek_cr.c: In function 'init_realtek_cr': drivers/usb/storage/realtek_cr.c:476:33: warning: 'buf[15]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[15]' was declared here drivers/usb/storage/realtek_cr.c:475:33: warning: 'buf[14]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[14]' was declared here drivers/usb/storage/realtek_cr.c:474:50: warning: 'buf[13]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[13]' was declared here drivers/usb/storage/realtek_cr.c:472:30: warning: 'buf[12]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[12]' was declared here drivers/usb/storage/realtek_cr.c:471:31: warning: 'buf[11]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[11]' was declared here drivers/usb/storage/realtek_cr.c:470:31: warning: 'buf[10]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[10]' was declared here drivers/usb/storage/realtek_cr.c:469:30: warning: 'buf[9]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[9]' was declared here drivers/usb/storage/realtek_cr.c:468:27: warning: 'buf[8]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[8]' was declared here drivers/usb/storage/realtek_cr.c:468:43: warning: 'buf[7]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[7]' was declared here drivers/usb/storage/realtek_cr.c:467:30: warning: 'buf[6]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[6]' was declared here drivers/usb/storage/realtek_cr.c:466:30: warning: 'buf[5]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[5]' was declared here drivers/usb/storage/realtek_cr.c:465:28: warning: 'buf[4]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[4]' was declared here drivers/usb/storage/realtek_cr.c:464:24: warning: 'buf[3]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[3]' was declared here drivers/usb/storage/realtek_cr.c:464:40: warning: 'buf[2]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[2]' was declared here drivers/usb/storage/realtek_cr.c:463:24: warning: 'buf[1]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[1]' was declared here drivers/usb/storage/realtek_cr.c:463:40: warning: 'buf[0]' may be used uninitialized in this function [-Wuninitialized] drivers/usb/storage/realtek_cr.c:455:5: note: 'buf[0]' was declared here Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Use ftdi_get_modem_status to check hardware buffers in chars_in_buffer. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
No need to check hardware buffers when we know that the software buffers are non-empty. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Use generic chars_in_buffer rather than copying it's implementation. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Export generic chars_in_buffer implementation so it can be used in subdrivers in combination with checks of any hardware buffers. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Refactor modem-control status retrieval. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Make sure we do not return USB-internal error codes to userspace. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Align the modem-control status operands as was originally indented. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Remove unused port field from private port data. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jan Beulich 提交于
Since there's no possible caller of dbgp_external_startup() and dbgp_reset_prep() when !USB_EHCI_HCD, there's no point in building and exporting these functions in that case. This eliminates a build error under the conditions listed in the subject, introduced with the merge f1c6872e. Reported-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
No need to memset a kzalloced struct. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Johan Hovold 提交于
Fix missing and superfluous whitespace. Fix misplaced brackets. Fix indentation. Signed-off-by: NJohan Hovold <jhovold@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Jingoo Han 提交于
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Joe Perches 提交于
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 30 10月, 2012 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This pulls in all of the USB changes in 3.7-rc3 into usb-next and resolves the merge issue with: drivers/usb/misc/ezusb.c Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 10月, 2012 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest由 Linus Torvalds 提交于
Pull ktest confusion fix from Steven Rostedt: "With the v3.7-rc2 kernel, the network cards on my target boxes were not being brought up. I found that the modules for the network was not being installed. This was due to the config CONFIG_MODULES_USE_ELF_RELA that came before CONFIG_MODULES, and confused ktest in thinking that CONFIG_MODULES=y was not found. Ktest needs to test all configs and not just stop if something starts with CONFIG_MODULES." * tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc由 Linus Torvalds 提交于
Pull minor spi MXS fixes from Mark Brown: "These fixes are both pretty minor ones and are driver local." * tag 'spi-mxs' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi: mxs: Terminate DMA in case of DMA timeout spi: mxs: Assign message status after transfer finished
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull arm-soc fixes from Arnd Bergmann: "Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91. These come a little later than I had hoped but unfortunately we had a few of these patches cause regressions themselves and had to work out how to deal with those in the meantime." * tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) Revert "ARM i.MX25: Fix PWM per clock lookups" ARM: versatile: fix versatile_defconfig ARM: mvebu: update defconfig with 3.7 changes ARM: at91: fix at91x40 build ARM: socfpga: Fix socfpga compilation with early_printk() enabled ARM: SPEAr: Remove unused empty files MAINTAINERS: Add arm-soc tree entry ARM: dts: mxs: add the "clock-names" for gpmi-nand ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ...
-
由 Mikulas Patocka 提交于
Functions generic_file_splice_read and generic_file_splice_write access the pagecache directly. For block devices these functions must be locked so that block size is not changed while they are in progress. This patch is an additional fix for commit b87570f5 ("Fix a crash when block device is read and block size is changed at the same time") that locked aio_read, aio_write and mmap against block size change. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Use rcu_read_lock_sched / rcu_read_unlock_sched / synchronize_sched instead of rcu_read_lock / rcu_read_unlock / synchronize_rcu. This is an optimization. The RCU-protected region is very small, so there will be no latency problems if we disable preempt in this region. So we use rcu_read_lock_sched / rcu_read_unlock_sched that translates to preempt_disable / preempt_disable. It is smaller (and supposedly faster) than preemptible rcu_read_lock / rcu_read_unlock. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
This patch introduces new barrier pair light_mb() and heavy_mb() for percpu rw semaphores. This patch fixes a bug in percpu-rw-semaphores where a barrier was missing in percpu_up_write. This patch improves performance on the read path of percpu-rw-semaphores: on non-x86 cpus, there was a smp_mb() in percpu_up_read. This patch changes it to a compiler barrier and removes the "#if defined(X86) ..." condition. From: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 10月, 2012 9 次提交
-
-
由 Arnd Bergmann 提交于
This reverts commit 92063cee, it was applied prematurely, causing this build error for imx_v4_v5_defconfig: arch/arm/mach-imx/clk-imx25.c: In function 'mx25_clocks_init': arch/arm/mach-imx/clk-imx25.c:206:26: error: 'pwm_ipg_per' undeclared (first use in this function) arch/arm/mach-imx/clk-imx25.c:206:26: note: each undeclared identifier is reported only once for each function it appears in Sascha Hauer explains: > There are several gates missing in clk-imx25.c. I have a patch which > adds support for them and I seem to have missed that the above depends > on it. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
With the introduction of CONFIG_ARCH_MULTIPLATFORM, versatile is no longer the default platform, so we need to enable CONFIG_ARCH_VERSATILE explicitly in order for that to be selected rather than the multiplatform configuration. Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Thomas Petazzoni 提交于
The split of 370 and XP into two Kconfig options and the multiplatform kernel support has changed a few Kconfig symbols, so let's update the mvebu_defconfig file with the latest changes. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
patch 738a0fd7 "ARM: at91: fix external interrupts in non-DT case" fixed a run-time error on some at91 platforms but did not apply the same change to at91x40, which now doesn't build. This changes at91x40 in the same way that the other platforms were changed. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "This is what we usually expect at this stage of the game, lots of little things, mostly in drivers. With the occasional 'oops didn't mean to do that' kind of regressions in the core code." 1) Uninitialized data in __ip_vs_get_timeouts(), from Arnd Bergmann 2) Reject invalid ACK sequences in Fast Open sockets, from Jerry Chu. 3) Lost error code on return from _rtl_usb_receive(), from Christian Lamparter. 4) Fix reset resume on USB rt2x00, from Stanislaw Gruszka. 5) Release resources on error in pch_gbe driver, from Veaceslav Falico. 6) Default hop limit not set correctly in ip6_template_metrics[], fix from Li RongQing. 7) Gianfar PTP code requests wrong kind of resource during probe, fix from Wei Yang. 8) Fix VHOST net driver on big-endian, from Michael S Tsirkin. 9) Mallenox driver bug fixes from Jack Morgenstein, Or Gerlitz, Moni Shoua, Dotan Barak, and Uri Habusha. 10) usbnet leaks memory on TX path, fix from Hemant Kumar. 11) Use socket state test, rather than presence of FIN bit packet, to determine FIONREAD/SIOCINQ value. Fix from Eric Dumazet. 12) Fix cxgb4 build failure, from Vipul Pandya. 13) Provide a SYN_DATA_ACKED state to complement SYN_FASTOPEN in socket info dumps. From Yuchung Cheng. 14) Fix leak of security path in kfree_skb_partial(). Fix from Eric Dumazet. 15) Handle RX FIFO overflows more resiliently in pch_gbe driver, from Veaceslav Falico. 16) Fix MAINTAINERS file pattern for networking drivers, from Jean Delvare. 17) Add iPhone5 IDs to IPHETH driver, from Jay Purohit. 18) VLAN device type change restriction is too strict, and should not trigger for the automatically generated vlan0 device. Fix from Jiri Pirko. 19) Make PMTU/redirect flushing work properly again in ipv4, from Steffen Klassert. 20) Fix memory corruptions by using kfree_rcu() in netlink_release(). From Eric Dumazet. 21) More qmi_wwan device IDs, from Bjørn Mork. 22) Fix unintentional change of SNAT/DNAT hooks in generic NAT infrastructure, from Elison Niven. 23) Fix 3.6.x regression in xt_TEE netfilter module, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tilegx: fix some issues in the SW TSO support qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan net: usb: Fix memory leak on Tx data path net/mlx4_core: Unmap UAR also in the case of error flow net/mlx4_en: Don't use vlan tag value as an indication for vlan presence net/mlx4_en: Fix double-release-range in tx-rings bas_gigaset: fix pre_reset handling vhost: fix mergeable bufs on BE hosts gianfar_ptp: use iomem, not ioports resource tree in probe ipv6: Set default hoplimit as zero. NET_VENDOR_TI: make available for am33xx as well pch_gbe: fix error handling in pch_gbe_up() b43: Fix oops on unload when firmware not found mwifiex: clean up scan state on error mwifiex: return -EBUSY if specific scan request cannot be honored brcmfmac: fix potential NULL dereference Revert "ath9k_hw: Updated AR9003 tx gain table for 5GHz" ath9k_htc: Add PID/VID for a Ubiquiti WiFiStation rt2x00: usb: fix reset resume rtlwifi: pass rx setup error code to caller ...
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Three fixes for slave dmanegine. Two are for typo omissions in sifr dmaengine driver and the last one is for the imx driver fixing a missing unlock" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: sirf: fix a typo in moving running dma_desc to active queue dmaengine: sirf: fix a typo in dma_prep_interleaved dmaengine: imx-dma: fix missing unlock on error in imxdma_xfer_desc()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael J Wysocki: - Fix for a memory leak in acpi_bind_one() from Jesper Juhl. - Fix for an error code path memory leak in pm_genpd_attach_cpuidle() from Jonghwan Choi. - Fix for smp_processor_id() usage in preemptible code in powernow-k8 from Andreas Herrmann. - Fix for a suspend-related memory leak in cpufreq stats from Xiaobing Tu. - Freezer fix for failure to clear PF_NOFREEZE along with PF_KTHREAD in flush_old_exec() from Oleg Nesterov. - acpi_processor_notify() fix from Alan Cox. * tag 'pm+acpi-for-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: missing break freezer: exec should clear PF_NOFREEZE along with PF_KTHREAD Fix memory leak in cpufreq stats. cpufreq / powernow-k8: Remove usage of smp_processor_id() in preemptible code PM / Domains: Fix memory leak on error path in pm_genpd_attach_cpuidle ACPI: Fix memory leak in acpi_bind_one()
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband fixes from Roland Dreier: "Small batch of fixes for 3.7: - Fix crash in error path in cxgb4 - Fix build error on 32 bits in mlx4 - Fix SR-IOV bugs in mlx4" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Perform correct resource cleanup if mlx4_QUERY_ADAPTER() fails mlx4_core: Remove annoying debug messages from SR-IOV flow RDMA/cxgb4: Don't free chunk that we have failed to allocate IB/mlx4: Synchronize cleanup of MCGs in MCG paravirtualization IB/mlx4: Fix QP1 P_Key processing in the Primary Physical Function (PPF) IB/mlx4: Fix build error on platforms where UL is not 64 bits
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg Kroah-Hartman: "Here are a bunch of USB fixes for the 3.7-rc tree. There's a lot of small USB serial driver fixes, and one larger one (the mos7840 driver changes are mostly just moving code around to fix problems.) Thanks to Johan Hovold for finding the problems and fixing them all up. Other than those, there is the usual new device ids, xhci bugfixes, and gadget driver fixes, nothing out of the ordinary. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (49 commits) xhci: trivial: Remove assigned but unused ep_ctx. xhci: trivial: Remove assigned but unused slot_ctx. xhci: Fix missing break in xhci_evaluate_context_result. xhci: Fix potential NULL ptr deref in command cancellation. ehci: Add yet-another Lucid nohandoff pci quirk ehci: fix Lucid nohandoff pci quirk to be more generic with BIOS versions USB: mos7840: fix port_probe flow USB: mos7840: fix port-data memory leak USB: mos7840: remove invalid disconnect handling USB: mos7840: remove NULL-urb submission USB: qcserial: fix interface-data memory leak in error path USB: option: fix interface-data memory leak in error path USB: ipw: fix interface-data memory leak in error path USB: mos7840: fix port-device leak in error path USB: mos7840: fix urb leak at release USB: sierra: fix port-data memory leak USB: sierra: fix memory leak in probe error path USB: sierra: fix memory leak in attach error path USB: usb-wwan: fix multiple memory leaks in error paths USB: keyspan: fix NULL-pointer dereferences and memory leaks ...
-