Fix the hbm power gating state machine so it will wait till it receives
confirmation interrupt for the PG_ISOLATION_EXIT message.

In process of the suspend flow the devices first have to exit from the
power gating state (runtime pm resume).
If we do not handle the confirmation interrupt after sending
PG_ISOLATION_EXIT message, we may receive it already after the suspend
flow has changed the device state and interrupt will be interpreted as a
spurious event, consequently link reset will be invoked which will
prevent the device from completing the suspend flow

kernel: [6603] mei_reset:136: mei_me 0000:00:16.0: powering down: end of reset
kernel: [476] mei_me_irq_thread_handler:643: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing.
kernel: mei_me 0000:00:16.0: FW not ready: resetting

Cc: <stable@vger.kernel.org> #3.18+
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=86241
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770397Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The current power gating naming was confusing,
we wish to swap meanings of register and flow level power gating terms,

For registers writing level use terms set and unset:
	mei_me_pg_set, mei_me_pg_unset

For flow/high level use power gating enter and power gating exit terms
	mei_me_pg_enter_sync, mei_me_pg_exit_sync
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

To make debugging a bit easier we add me register
access tracing
<debugfs>/tracing/events/mei/mei_reg_{read,write}
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Use mei_device structure as the first argument to the io
register access wrappers so we'll have access to the device
structure needed for tracing.

2. Use wrapper consistently
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We might enter the interrupt handler with hw_ready already set,
but prior we actually started the reset flow.
To soleve this we move the reset release from the interrupt handler
to the HW start wait function which is part of the reset sequence.

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We should mask interrupt set bit when writing back
hcsr value in reset bit clean-up.

This is refinement for
mei: clean reset bit before reset
commit b13a65ef

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

H_RST bit in H_CSR register may be found lit before reset is started,
for example if preceding reset flow hasn't completed.
In that case asserting H_RST will be ignored, therefore we need to clean
H_RST bit to start a successful reset sequence.

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ME devices prior to PCH8 (Lynx Point) have two FW status registers,
on PCH8 and newer excluding txe there are six FW status registers.
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Kill host_hw_status and me_hw_state from me hw structure that used
to cache host and me csr values.
We do not use the cached values across the function calls anymore
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add missed parameters descriptions and return values descriptions
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix Kdoc documentation formatting warnings
genertaed by ./scripts/kernel-doc
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Device specific configurations are currently only needed by me hw
so we can remove it from txe
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For purpose of adding testing HW we would like
to get rid of pci dependency in generic mei code.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fw status retrieval has pci specific implementation
so we push it back to the hw layer
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For purpose of adding testing HW we would like
to get rid of pci dependency in generic mei code
This patch provides only straight forward changes
FW status and prob quirks need to be handled separately
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Setting of hw_ops and device has should be in
mei_device_init.
We add reference to the parent device and remove
pci dependent cfg
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

fix new style warning: Missing a blank line after declarations
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

extract supported hbm features and commands from the hbm version
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We cannot handle user interrupt in context of hw initialization
so we only wait for time out which is reasonably short
Also we don't need to check error from wait, only flag value.
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We introduced unified FW status function in patch
mei: add per device configuration (lkml.org/lkml/2014/5/12/607)

This change made hw_ops functions unused and obsolete
therefore we remove these functions from source code.
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Move quirk FW type detector to cfg structure
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add mei_cfg structure that holds per device configuration
data and hooks, as the first step we add firmware
status register offsets
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

According the spec the host should read H_CSR again
after asserting reset H_RST to ensure that reset was
read by the firmware

Cc: stable@vger.kernel.org
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It my take time till ME_RDY will be cleared after the reset,
so we cannot check the bit before we got the interrupt

Cc: stable@vger.kernel.org
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY
while cleared and not while  ME_RDY is set. The spurious interrupt
is not delivered on all platforms in this case the
driver may fail to initialize.

Cc: stable@vger.kernel.org
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fetch FW status registers, as they are important in
in understanding of FW reset reasons
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For power gating entry we write hbm pg entry request command and
then we set pg register
For power gating exit we clear pg register and wait for exit request
hbm command.

Exit power gating request might also be initiated by the firmware
w/o explicit driver request

The power gating state is tracked by pg_state member of me_hw
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the runtime pm and the internal power gating
cannot be in complete sync in regards to I/O
operations, we need to expose the device
hardware internal power gating state to mei layer

2. We add pg_state handler that translate the hw
internal pg state to mei layer

2. We add power gating event variable to keep
power track of power gating transitions
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable power gating isolation only if hw and fw support it.
This is indicated by ME_PGIC_HRA bit in ME_CSR_HA register
and on HBM protocol version.

The information is exported to MEI layer through
new pg_is_enabled hw op.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add entry and exit power gating isolation register
write handler.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove includes of me-hw.h and me-hw-regs.h headers from
the mei generic code.
The mei layer should not depend on hw specific headers
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a race in ME hardware between data copy for host and interrupt
delivery. An interrupt can be delivered prior to whole data copied for the
host to read but rather then going trough the reset we just merely need to
wait for the next interrupt.

The bug is visible in read/write stress with multiple connections per client

This is a regression caused as a side effect of the commit:
commit 544f9460
mei: do not run reset flow from the interrupt thread
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org> # 3.14
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. Propagate ENOTTY  to user space if the client is not present
in the system
2. Use ETIME consistently on timeouts
3. Return EIO on write failures
4. Return ENODEV on recoverable device failures such as resets
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since txe use doorbell and not circular buffer
we have to cheat in write slot counting, txe always consume all the
slots upon write. In order for it to work we need to track
slots using mei_hbuf_empty_slots() instead of tracking it in mei layer
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

A client has to acquire host buffer
before writing, we add lock like wrapper
to replace the code snippet

if (dev->hbuf_is_ready)
        dev->hbuf_is_ready = false;
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use more standard message writing for
oob data.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In some rare case mei hw reset may take long time to settle.
Instead of blocking resume flow we span another driver reset flow in
separate work context

This allows as to shorten hw reset timeout to something more acceptable
by DPM_WATCHDOG_TIMEOUT
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1. MEI_DEV_RESETTING device state spans only hardware reset flow
while starting dev state is saved into a local variable for further
reference, this let us to reduce big if statements in case we
are trying to avoid nested resets

2. During initializations if the reset ended in MEI_DEV_DISABLED device
state we bail out with -ENODEV

3. Remove redundant interrupts_enabled parameter as this
 can be deduced from the starting dev_state

4. mei_reset propagates error code to the caller

5. Add mei_restart function to wrap the pci resume
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes a potential deadlock in case of a firmware
initiated reset

mei_reset has a dialog with the interrupt thread hence
it has to be run from an another work item

Most of the mei_resets were called from mei_hbm_dispatch
which is called in interrupt thread context so this
function underwent major revamp. The error code is
propagated to the interrupt thread and if needed
the reset is scheduled from there.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>