use common #ifndef __EASYCAP_H_ instead of if (!defined(EASYCAP_H))
for protecting header from double inclusion

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

place all globals to easycap.h, which is included
by all c-files
easycap_standard: fix declaration vs. definiton conflict

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

easycap_settings.c:587:58: warning: conversion of
easycap_settings.c:587:58:     unsigned int to
easycap_settings.c:587:58:     int enum v4l2_field
easycap_settings.c:593:63: warning: conversion of
easycap_settings.c:593:63:     unsigned int to
easycap_settings.c:593:63:     int enum v4l2_colorspace

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

easycap_main.c:41:23: warning: symbol 'easycapdc60_dongle' was not declared. Should it be static?
easycap_main.c:49:22: warning: symbol 'easycap_usb_device_id_table' was not declared. Should it be static?
easycap_main.c:69:30: warning: symbol 'easycap_fops' was not declared. Should it be static?
easycap_main.c:82:29: warning: symbol 'easycap_vm_ops' was not declared. Should it be static?
easycap_main.c:87:25: warning: symbol 'easycap_class' was not declared. Should it be static?
easycap_main.c:95:35: warning: symbol 'v4l2_fops' was not declared. Should it be static?
easycap_main.c:5071:1: warning: symbol 'easycap_module_init' was not declared. Should it be static?
easycap_main.c:5101:1: warning: symbol 'easycap_module_exit' was not declared. Should it be static?
easycap_low.c:45:50: warning: symbol 'stk1160configPAL' was not declared. Should it be static?
easycap_low.c:87:28: warning: symbol 'stk1160configNTSC' was not declared. Should it be static?
easycap_low.c:129:50: warning: symbol 'saa7113configPAL' was not declared. Should it be static?
easycap_low.c:187:28: warning: symbol 'saa7113configNTSC' was not declared. Should it be static?
easycap_ioctl.c:915:5: warning: symbol 'adjust_mute' was not declared. Should it be static?
easycap_settings.c:42:31: warning: symbol 'easycap_standard' was not declared. Should it be static?
easycap_settings.c:312:23: warning: symbol 'easycap_format' was not declared. Should it be static?
easycap_settings.c:607:23: warning: symbol 'easycap_control' was not declared. Should it be static?

Cc: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMike McCormack <mikem@ring3k.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I do not see any reason for the mutex_unlock(&inode->i_mutex); in
pohmelfs_rename().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update with the kernel object name of touch device for getting
the regulator of the synaptics rmi4 touch device.
Signed-off-by: NNaveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use -E... instead of just E... in a few places where negative error
codes are expected by a functions callers.  These were found by grepping
with coccinelle & then inspecting by hand to determine which were bugs.

The staging/cxt1e1 driver appears to intentionally use positive E...
error codes in some places, and negative -E... error codes in others,
making it hard to know which is intended where - very likely I missed
some problems in that driver.
Signed-off-by: NRalph Loader <suckfish@ihug.co.nz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

put_user() may fail, if so return -EFAULT.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most comedi hardware drivers that support the INSN_BITS instruction
ignore the base channel (specified by insn->chanspec) and assume it is
0.  The base channel is supposed to affect how the mask (in data[0]) and
bits (in data[1]) are treated.  Bit 0 applies to the base channel, bit 1
applies to base channel plus 1, etc.

For subdevices with no more than 32 channels, this patch modifies the
chanspec and data before presenting it to the hardware driver, and
modifies the data bits read back by the hardware driver (into data[1]).
This makes it appear to the hardware driver that the base channel was
set to 0.

For subdevices with more than 32 channels, the instruction is left
unmodified, as it is assumed that the hardware driver takes note of the
base channel in this case in order to provide access beyond channel 31.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

linux/slab.h is included twice in ft1000_dnld.c - remove duplicate.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the sparse warnings
"obsolete struct initializer, use C99 syntax" in vt6655/device_main.c
by converting the struct to C99 syntax

KernelVersion: linux-next-20110110
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the sparse warnings
"obsolete struct initializer, use C99 syntax" in icp_multi.c
by converting the struct to C99 syntax

KernelVersion: linux-next-20110110
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the sparse warnings in me4000.c:
me4000.c:122:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:123:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:124:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:125:1: warning: obsolete struct initializer, use C99 syntax
by converting the struct to use C99 syntax
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

for in-tree driver we can use snd_card_create
for backports to older kernels this can be easily wrapped
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

remove \ from the code where C syntex doesnt require it
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

easycap_main.c:34:5: warning: symbol 'easycap_debug' was not declared. Should it be static?
easycap_main.c:36:5: warning: symbol 'easycap_gain' was not declared. Should it be static?

These two variables actually were declared in several places.
The variables are used in several files.
I've fixed "easycap_debug" so it gets declared in one place only and included properly.
For "easycap_gain" made it static and I created added a
->gain member to the easycap struct.  This seems cleaner than using a
global variable and later on we may make this controlable via sysfs.

Cc:Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Acked-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is necessary because some distributions are disabling OSS entirely.
Signed-off-by: NMike Thomas <rmthomas@sciolus.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* select FW_LOADER in Kconfig - From: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* declare MODULE_FIRMWARE for r8712u and change to correct directory
* delete 10K line farray.h containing internal firmware
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

IIO Driver for Maxim MAX517, MAX518 and MAX519 DAC
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>