- 17 3月, 2017 5 次提交
-
-
由 Ido Schimmel 提交于
In a similar fashion to the previous patch, allow bridges and VLAN devices on top of bridges to be enslaved to a VRF master device. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Allow port netdevs, LAG and VLAN devices stacked on top of these to be enslaved to a VRF master device. Upon enslavement, create a router interface (RIF) for the enslaved netdev and associate it with a virtual router (VR) based on the VRF's table ID. If a RIF already exists for the netdev (f.e., due to the existence of an IP address), then it's deleted and a new one is created with the appropriate VR binding. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
We usually destroy the netdev's router interface (RIF) when the last IP address is removed from it. However, we shouldn't do that if it's enslaved to an L3 master device. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
When a router interface (RIF) is created due to a netdev being enslaved to a VRF master, then it should be associated with the appropriate virtual router (VR) and not the default one. If netdev is a VRF slave, lookup the VR based on the VRF's table ID. Otherwise default to the MAIN table. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
In commit c3852ef7 ("ipv4: fib: Replay events when registering FIB notifier") we dumped the FIB tables and replayed the events to the passed notification block. However, we merely sent a RULE_ADD notification in case custom rules were in use. As explained in previous patches, this approach won't work anymore. Instead, we should notify the caller about all the FIB rules and let it act accordingly. Upon registration to the FIB notification chain, replay a RULE_ADD notification for each programmed FIB rule, custom or not. The integrity of the dump is ensured by the mechanism introduced in the above mentioned commit. Prevent regressions by making sure current listeners correctly sanitize the notified rules. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Acked-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 3月, 2017 18 次提交
-
-
由 Iyappan Subramanian 提交于
This patch implements workaround for errata 10GE_8 and ENET_11: "HW reports length error for valid 64 byte frames with len <46 bytes" by recovering them from error. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NToan Le <toanle@apm.com> Tested-by: NFushen Chen <fchen@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch implements workaround for errata 10GE_1: 10Gb Ethernet port FIFO threshold default values are incorrect. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NToan Le <toanle@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Tested-by: NFushen Chen <fchen@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Iyappan Subramanian 提交于
This patch fixes Rx checksum validation logic and adds NETIF_F_RXCSUM flag. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch fixes the wrong logical OR operation by changing it to bit-wise OR operation. Fixes: 3bb502f8 ("drivers: net: xgene: fix statistics counters race condition") Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Quan Nguyen 提交于
This patch fixes the hardware checksum settings by properly program the classifier. Otherwise, packet may be received with checksum error on X-Gene1 SoC. Signed-off-by: NQuan Nguyen <qnguyen@apm.com> Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amritha Nambiar 提交于
The configurable priority to traffic class mapping and the user specified queue ranges are used to configure the traffic class, overriding the hardware defaults when the 'hw' option is set to 0. However, when the 'hw' option is non-zero, the hardware QOS defaults are used. This patch makes it so that we can pass the data the user provided to ndo_setup_tc. This allows us to pull in the queue configuration if the user requested it as well as any additional hardware offload type requested by using a value other than 1 for the hw value. Finally it also provides a means for the device driver to return the level supported for the offload type via the qopt->hw value. Previously we were just always assuming the value to be 1, in the future values beyond just 1 may be supported. Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
At the end of the timeout loop, retries will always be zero so the check for zero is redundant so remove it. Also replace printk with pr_err as recommended by checkpatch. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares the main ISR for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch configures TSO for all available tx queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares the DMA initialization process for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares RX and TX set tail functions for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares tx and rx ring length configuration for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch adds rx watchdog configuration for all queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares DMA interrupts treatment for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares stmmac_err for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares the RX/TX DMA stop/start process for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares the DMA IRQ enable/disable process for multiple queues. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joao Pinto 提交于
This patch prepares DMA Operation Mode configuration for multiple queues. The work consisted on breaking the DMA operation Mode configuration function into RX and TX scope and adapting its mechanism in stmmac_main. Signed-off-by: NJoao Pinto <jpinto@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 3月, 2017 17 次提交
-
-
由 Harshitha Ramamurthy 提交于
A previous commit introduced a field that tracks the features that are disabled due to HW resource limitations as opposed to the featured disabled by the user. This patch changes the name of the field to make it more readable since it might get confusing when looking at code containing both the flags field and the auto_disable_features field together. Change-ID: Idcc9888659698f6fe3ccff17c8c3f09b5026f708 Signed-off-by: NHarshitha Ramamurthy <harshitha.ramamurthy@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Bimmy Pujari 提交于
Signed-off-by: NBimmy Pujari <bimmy.pujari@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Our original filter limit of 8 was based on behavior that we saw from Linux VMs. Now we're running Other Operating Systems under KVM and we see that they commonly use more MAC filters. Since it seems weird to require people to enable trusted VFs just to boot their OS, bump the number of filters allowed by default. Change-ID: I76b2dcb2ad6017e39231ad3096c3fb6f065eef5e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC and DMA_ATTR_WEAK_ORDERING. By enabling both of these for the Rx path we are able to see performance improvements on architectures that implement either one due to the fact that page mapping and unmapping only has to sync what is actually being used instead of the entire buffer. In addition by enabling the weak ordering attribute enables a performance improvement for architectures that can associate a memory ordering with a DMA buffer such as Sparc. Change-ID: If176824e8231c5b24b8a5d55b339a6026738fc75 Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Filip Sadowski 提交于
This patch clarifies the reason for removal of automatically firmware-generated filter and explicit addition of filter which accepts frames with any VLAN id. Change-ID: Iabf180b6d61c4d8a36d3bcf8457c377a6f2aca0e Signed-off-by: NFilip Sadowski <filip.sadowski@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Lihong Yang 提交于
This patch fixes the issue that RSS offloading only works on PF0 by using the direct register writing of the hash keys for the VFs instead of using the admin queue command to do so. Change-ID: Ia02cda7dbaa23def342e8786097a2c03db6f580b Signed-off-by: NLihong Yang <lihong.yang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Lihong Yang 提交于
Currently ethtool -e will error out with a X722 interface as its EEPROM has a scope limit at offset 0x5B9FFF. This patch fixes the issue by setting the EEPROM length to the scope limit to avoid NVM read failure beyond that. Change-ID: I0b7d4dd6c7f2a57cace438af5dffa0f44c229372 Signed-off-by: NLihong Yang <lihong.yang@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
This is a solution to avoid adding too many queues to num_lan_msix. A recent refactor of queue pairs accidentally added all remaining vectors to the num_lan_msix which can have adverse performance issues, due to enabling more queues than the number of CPU cores. This patch removes the old calculation, and replaces it with a simple algorithm. 1) add queue pairs up to num_online_cpus(), but capped at half of total vectors 2) then add alternative features such as flow directory and similar 3) finally, add the remaining vectors back to queue pairs, but capped such that the total number of queue pairs does not exceed num_online_cpus(). Change-ID: I668abf67d5011a1248866daba8885f4ff00cb8d9 Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NHarshitha Ramamurthy <harshitha.ramamurthy@intel.com> Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
(KISS is Keep It Simple, Stupid. Or is it?) The client interface vastly overengineered for what it needs to do. It was originally designed to support multiple clients on multiple netdevs, possibly even with multiple drivers. None of this happened, and now we know that there will only ever be one client for i40e (i40iw) and one for i40evf (i40iwvf). So, time for some KISS. Since i40e and i40evf are a Dynasty, we'll simplify this one to match the VF interface. First, be a Destroyer and remove all of the lists and locks required to support multiple clients. Keep one static around to keep track of one client, and track the client instances for each netdev in the driver's pf (or adapter) struct. Now it's Almost Human. Since we already know the client type is iWarp, get rid of any checks for this. Same for VSI type - it's always going to be the same type, so it's just a Parasite. While we're at it, fix up some comments. This makes the function headers actually match the functions. These changes reduce code complexity, simplify maintenance, squash some lurking timing bugs, and allow us to Rock and Roll All Nite. Change-ID: I1ea79948ad73b8685272451440a34507f9a9012e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
In preparation for upcoming RDMA-capable hardware, add a client interface to the VF driver. This is a slightly-simplified version of the PF client interface, with the names changed to protect the innocent. Due to the nature of the VF<->PF interactions, the client interface sometimes needs to call back into itself to pass messages. Because of this, we can't use the coarse-grained locking like the PF's client interface uses. Instead, we handle all client interactions in a separate thread so the watchdog can still run and process virtual channel messages. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NAvinash Dayanand <avinash.dayanand@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Some opcodes added & reordered to be in numerical order with the rest of the opcodes. This patch adds admin queue structs to support Wake on LAN feature for X722. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Aaron Salter 提交于
Acquire NVM lock before reads on all devices. Previously, locks were only used for X722 and later. Fixes an issue where simultaneous X710 NVM accesses were interfering with each other. Change-ID: If570bb7acf958cef58725ec2a2011cead6f80638 Signed-off-by: NAaron Salter <aaron.k.salter@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mintz, Yuval 提交于
This adds the necessary infrastructure changes for initializing and working with the new series of QL41xxx adapaters. It also adds 2 new PCI device-IDs to qede: - 0x8070 for QL41xxx PFs - 0x8090 for VFs spawning from QL41xxx PFs Signed-off-by: NTomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
Missing in the initial submission, qed fails to propagate qedi's request to enable OOO to firmware. Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI") Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
Need to set the number of entries in database, otherwise the logic would quickly surpass the array. Fixes: 1d6cff4f ("qed: Add iSCSI out of order packet handling") Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
Before iterating over the the LL2 Rx ring, the ring's spinlock is taken via spin_lock_irqsave(). The actual processing of the packet [including handling by the protocol driver] is done without said lock, so qed releases the spinlock and re-claims it afterwards. Problem is that the final spin_lock_irqrestore() at the end of the iteration uses the original flags saved from the initial irqsave() instead of the flags from the most recent irqsave(). So it's possible that the interrupt status would be incorrect at the end of the processing. Fixes: 0a7fb11c ("qed: Add Light L2 support"); CC: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mintz, Yuval 提交于
Fixes: fc831825 ("qed: Add support for hardware offloaded iSCSI") Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-