Share the waitqueue that drm_irq uses when performing the vblank evade
trick for atomic pipe updates.

v2: Keep intel_pipe_handle_vblank() (Chris)
Suggested-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the actual head has progressed forward inside a batch (request),
don't accumulate hangcheck score.

As the hangcheck score in increased only by acthd jumping backwards,
the result is that we only declare an active batch as stuck if it is
trapped inside a loop. Or that the looping will dominate the batch
progression so that it overcomes the bonus that forward progress gives.

v2: Improved commit message (Chris Wilson)
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
[danvet: s/active_loop/active (loop)/ as requested by Chris.]
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Before we've installed the handler, we can set this and avoid confusing
init code that then thinks IRQs are enabled and spews complaints
everywhere.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that we use the runtime IRQ enable/disable functions in our suspend
path, we can simply check the pm._irqs_disabled flag everywhere.  So
rename it to catch the users, and add an inline for it to make the
checks clear everywhere.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was always the case on our suspend path, but it was recently
exposed by the change to use our runtime IRQ disable routine rather than
the full DRM IRQ disable.  Keep the warning on the enable side, as that
really would indicate a bug.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move it from hsw_power_well_post_enable() (intel_pm.c) to i915_irq.c
so we can reuse the nice IRQ macros we have there. The main difference
is that now we're going to check if the IIR register is non-zero when
we try to re-enable the interrupts.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we enable unclaimed register reporting on Gen 8, we will discover
that the IRQ registers for pipes B and C are also on the power well,
so writes to them when the power well is disabled result in unclaimed
register errors.

Also, hsw_power_well_post_enable() already takes care of re-enabling
them once the power well is enabled.

Testcase: igt/pm_rpm/rte
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Traditionally we use genX_ for GT/render stuff and the codenames for
display stuff. But the gt and pm interrupt handling functions on
gen5/6+ stuck out as exceptions, so convert them.

Looking at the diff this nicely realigns our ducks since almost all
the callers are already platform-specific functions following the
genX_ pattern.

Spotted while reviewing some internal rps patches.

No function change in this patch.
Acked-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No need to list all the platforms explicitly.

The prefix is a bit inconsistent since we usually pick gen8_ for GT
related functions. But this anti-pattern is already established with snb,
so material for a different patch.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds DP 1.2 MST support on Haswell systems.

Notes:
a) this reworks irq handling for DP MST ports, so that we can
avoid the mode config locking in the current hpd handlers, as
we need to process up/down msgs at a better time.

Changes since v0.1:
use PORT_PCH_HOTPLUG to detect short vs long pulses
add a workqueue to deal with digital events as they can get blocked on the
main workqueue beyong mode_config mutex
fix a bunch of modeset checker warnings
acks irqs in the driver
cleanup the MST encoders

Changes since v0.2:
check irq status again in work handler
move around bring up and tear down to fix DPMS on/off
use path properties.

Changes since v0.3:
updates for mst apis
more state checker fixes
irq handling improvements
fbcon handling support
improved reference counting of link - fixes redocking.

Changes since v0.4:
handle gpu reset hpd reinit without oopsing
check link status on HPD irqs
fix suspend/resume

Changes since v0.5:
use proper functions to get max link/lane counts
fix another checker backtrace - due to connectors disappearing.
set output type in more places fro, unknown->displayport
don't talk to devices if no HPD asserted
check mst on short irqs only
check link status properly
rebase onto prepping irq changes.
drop unsued force_act

Changes since v0.6:
cleanup unused struct entry.

[airlied: fix some sparse warnings].
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

commit 4be17381
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jun 6 10:22:29 2014 +0100

    drm/i915: Reorder semaphore deadlock check

did the majority of the work, but it missed one crucial detail:

The check for the unkickable deadlock on this ring must come after the
check whether the ring that we are waiting on has already passed its
target seqno.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80709Tested-by: NStefan Huber <shuber@sthu.org>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DP MST will need connectors that aren't connected to specific
encoders, add some checks in advance to avoid oopses.
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Enabled PM interrupt programming for CHV. Re-using gen8 code and extending same for CHV.
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Place the RPS counters inside the RPS struct.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With RC6 enabled, BYT has an HW issue in determining the right
Gfx busyness.
WA for Turbo + RC6: Use SW based Gfx busy-ness detection to decide
on increasing/decreasing the freq. This logic will monitor C0
counters of render/media power-wells over EI period and takes
necessary action based on these values

v2: Refactor duplicate code. (Ville)

v3: Reformat the comments. (Ville)

v4: Enable required counters and remove unwanted code (Ville)

v5: Added frequency change acceleration support and remove kernel-doc
style comments. (Ville)

v6: Updated comment section and Fix w/a comment. (Ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some drivers need to be able to have a perfect race-free fbcon setup.
Current drivers only enable hotplug processing after the call to
drm_fb_helper_initial_config which leaves a tiny but important race.

This race is especially noticable on embedded platforms where the
driver itself enables the voltage for the hdmi output, since only then
will monitors (after a bit of delay, as usual) respond by asserting
the hpd pin.

Most of the infrastructure is already there with the split-out
drm_fb_helper_init. And drm_fb_helper_initial_config already has all
the required locking to handle concurrent hpd events since

commit 53f1904b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Mar 20 14:26:35 2014 +0100

    drm/fb-helper: improve drm_fb_helper_initial_config locking

The only missing bit is making drm_fb_helper_hotplug_event save
against concurrent calls of drm_fb_helper_initial_config. The only
unprotected bit is the check for fb_helper->fb.

With that drivers can first initialize the fb helper, then enabel
hotplug processing and then set up the initial config all in a
completely race-free manner. Update kerneldoc and convert i915 as a
proof of concept.

Feature requested by Thierry since his tegra driver atm reliably boots
slowly enough to misses the hotplug event for an external hdmi screen,
but also reliably boots to quickly for the hpd pin to be asserted when
the fb helper calls into the hdmi ->detect function.

Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Ipehr just carries Dword 0 and on Gen 8, offsets are located
on Dword 2 and 3 of MI_SEMAPHORE_WAIT.

This implementation was based on Ben's work and on Ville's suggestion for Ben

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Fixup format string.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The digital ports from Ironlake and up have the ability to distinguish
between long and short HPD pulses. Displayport 1.1 only uses the short
form to request link retraining usually, so we haven't really needed
support for it until now.

However with DP 1.2 MST we need to handle the short irqs on their
own outside the modesetting locking the long hpd's involve. This
patch adds the framework to distinguish between short/long to the
current code base, to lay the basis for future DP 1.2 MST work.

This should mean we get better bisectability in case of regression
due to the new irq handling.

v2: add GM45 support (untested, due to lack of hw)
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NTodd Previte <tprevite@gmail.com>
[danvet: Fix conflicts in i915_irq.c with Oscar Mateo's irq handling
race fixes and a trivial one in intel_drv.h with the psr code.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise, we might receive a new interrupt before we have time to
ack the first one, eventually missing it.

Without an atomic XCHG operation with mmio space, this patch merely
reduces the window in which we can miss an interrupt (especially when
you consider how heavyweight the I915_READ/I915_WRITE operations are).

Notice that, before clearing a port-sourced interrupt in the IIR, the
corresponding interrupt source status in the PORT_HOTPLUG_STAT must be
cleared.

Spotted by Bob Beckett <robert.beckett@intel.com>.

v2:
- Add warning to commit message and comments to the code as per Chris
  Wilson's request.
- Imre Deak pointed out that the pipe underrun flag might not be signaled
  in IIR, so do not make valleyview_pipestat_irq_handler depend on it.

v3: Improve the source code comment.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise, we might receive a new interrupt before we have time to
ack the first one, eventually missing it.

The right order should be:

1 - Disable Master Interrupt Control.
2 - Find the category of interrupt that is pending.
3 - Find the source(s) of the interrupt and clear the Interrupt Identity bits (IIR)
4 - Process the interrupt(s) that had bits set in the IIRs.
5 - Re-enable Master Interrupt Control.

Without an atomic XCHG operation with mmio space, the above merely reduces the window
in which we can miss an interrupt (especially when you consider how heavyweight the
I915_READ/I915_WRITE operations are).

Spotted by Bob Beckett <robert.beckett@intel.com>.

v2: Add warning to commit message and comments to the code as per Chris Wilson's request.

v3: Improve the source code comment.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise, we might receive a new interrupt before we have time to
ack the first one, eventually missing it.

Without an atomic XCHG operation with mmio space, this patch merely
reduces the window in which we can miss an interrupt (especially when
you consider how heavyweight the I915_READ/I915_WRITE operations are).

Notice that, before clearing a port-sourced interrupt in the IIR, the
corresponding interrupt source status in the PORT_HOTPLUG_STAT must be
cleared.

Spotted by Bob Beckett <robert.beckett@intel.com>.

v2:
- Reorder the IIR clearing to reduce the window even further.
- Add warning to commit message and comments to the code as per Chris
  Wilson's request.
- Imre Deak pointed out that the pipe underrun flag might not be signaled
  in IIR, so do not make valleyview_pipestat_irq_handler depend on it.

v3: Improve the source code comment.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise, we might receive a new interrupt before we have time to ack the first
one, eventually missing it.

According to BSPec, the right order should be:

1 - Disable Master Interrupt Control.
2 - Find the source(s) of the interrupt.
3 - Clear the Interrupt Identity bits (IIR).
4 - Process the interrupt(s) that had bits set in the IIRs.
5 - Re-enable Master Interrupt Control.

Without an atomic XCHG operation with mmio space, the above merely reduces the window
in which we can miss an interrupt (especially when you consider how heavyweight the
I915_READ/I915_WRITE operations are).

We maintain the "disable SDE interrupts when handling" hack since apparently it works.

Spotted by Bob Beckett <robert.beckett@intel.com>.

v2: Add warning to commit message and comments to the code as per Chris Wilson's request.
v3: Improve the source comments.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch enables the framework for using MMIO based flip calls,
in contrast with the CS based flip calls which are being used currently.

MMIO based flip calls can be enabled on architectures where
Render and Blitter engines reside in different power wells. The
decision to use MMIO flips can be made based on workloads to give
100% residency for Media power well.

v2: The MMIO flips now use the interrupt driven mechanism for issuing the
flips when target seqno is reached. (Incorporating Ville's idea)

v3: Rebasing on latest code. Code restructuring after incorporating
Damien's comments

v4: Addressing Ville's review comments
    -general cleanup
    -updating only base addr instead of calling update_primary_plane
    -extending patch for gen5+ platforms

v5: Addressed Ville's review comments
    -Making mmio flip vs cs flip selection based on module parameter
    -Adding check for DRIVER_MODESET feature in notify_ring before calling
     notify mmio flip.
    -Other changes mostly in function arguments

v6: -Having a seperate function to check condition for using mmio flips (Ville)
    -propogating error code from i915_gem_check_olr (Ville)

v7: -Adding __must_check with i915_gem_check_olr (Chris)
    -Renaming mmio_flip_data to mmio_flip (Chris)
    -Rebasing on latest nightly

v8: -Rebasing on latest code
    -squash 3rd patch in series(mmio setbase vs page flip race) with this patch
    -Added new tiling mode update in intel_do_mmio_flip (Chris)

v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in
intel_postpone_flip, as this is a more restrictive condition (Chris)

v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch.
These patches make the selection of CS vs MMIO flip at the page flip time, and
make the module parameter for using mmio flips as tristate, the states being
'force CS flips', 'force mmio flips', 'driver discretion'.
Changed the logic for driver discretion (Chris)

v11: Minor code cleanup(better readability, fixing whitespace errors, using
lockdep to check mutex locked status in postpone_flip, removal of __must_check
in function definition) (Chris)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSourab Gupta <sourab.gupta@intel.com>
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb
[danvet: Fix up parameter alignement checkpatch spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On CHV, All the freq request should be even. So, we need to make sure we
request the opcode accordingly.

v2: Avoid vairable for freq request (ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If a semaphore is waiting on another ring, which in turn happens to be
waiting on the first ring, but that second semaphore has been signalled,
we will be able to kick the second ring and so can treat the first ring
as a valid WAIT and not as HUNG.

v2: Be paranoid and cap the potential recursion depth whilst visiting
the semaphore signallers. (Mika)

References: https://bugs.freedesktop.org/show_bug.cgi?id=54226
References: https://bugs.freedesktop.org/show_bug.cgi?id=75502Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

I don't see why we wouldn't want interrupts to wake up the CPU from C3
always, so just set the AGPBUSY# bit in gen3_init_clock_gating().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fallout from an intermediate patch revision that I deemed worth saving.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No point in having this indirection.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So apparently this is tricky.

We need to consider:
- We start out with all the hw enabling bits disabled, both the
  individual fifo underrun interrupts and the shared display error
  interrupts masked. Otherwise if the bios config is broken we'll blow
  up with a NULL deref in our interrupt handler since the crtc
  structures aren't set up yet at driver load time.
- On gmch we need to mask fifo underruns on the sw side, so always
  need to set that in sanitize_crtc for those platforms.
- On other platforms we try to set the sw tracking so that it reflects
  the real state. But since a few platforms have shared bits we must
  _not_ disable fifo underrun reporting. Otherwise we'll never enable
  the shared error interrupt.

This is the state before out patch, but unfortunately this is not good
enough. But after a suspend resume operation this is broken:
1. We don't enable the hw interrupts since the same code runs on
resume as on driver load.
2. The fifo underrun state adjustments we do in sanitize_crtc doesn't
fire on resume since (except for hilarious firmware) all pipes are off
at that point. But they also don't hurt since the subsequent crtc
enabling due to force_restore will enable fifo underruns.

Which means when we enable fifo underrun reporting we notice that the
per-crtc state is already correct and short-circuit everthing out. And
the interrupt doesn't get enabled.

A similar problem would happen if the bios doesn't light up anything
when the driver loads. Which is exactly what happens when we reload
the driver since our unload functions disables all outputs.

Now we can't just rip out the short-circuit logic and unconditionally
update the fifo underrun reporting interrupt masking: We have some
checks for shared error interrupts to catch issues that happened when
the shared error interrupt was disabled.

The right fix is to push down this logic so that we can always update
the hardware state, but only check for missed fifo underruns on a real
enabled->disabled transition and ignore them when we're already
disabled.

On platforms with shared error interrupt the pipe CRC interrupts are
grouped together with the fifo underrun reporting this fixes pipe CRC
support after suspend and driver reloads.

Testcase: igt/kms_pipe_crc_basic/suspend-*
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Generated using semantic patches:

@@
expression E;
@@

- drm_get_connector_name(&E)
+ E.name

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

v2: Turn drm_get_connector_name(&E) into E.name instead of &(E)->name.
Acked-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Manual cleanup after the previous Coccinelle script.

Yes, I could write another Coccinelle script to do this but I
don't want labor-replacing robots making an honest programmer's
work obsolete (also, I'm lazy).
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This refactoring has been performed using the following Coccinelle
semantic script:

    @@
    struct intel_engine_cs r;
    @@
    (
    - (r).obj
    + r.buffer->obj
    |
    - (r).virtual_start
    + r.buffer->virtual_start
    |
    - (r).head
    + r.buffer->head
    |
    - (r).tail
    + r.buffer->tail
    |
    - (r).space
    + r.buffer->space
    |
    - (r).size
    + r.buffer->size
    |
    - (r).effective_size
    + r.buffer->effective_size
    |
    - (r).last_retired_head
    + r.buffer->last_retired_head
    )

    @@
    struct intel_engine_cs *r;
    @@
    (
    - (r)->obj
    + r->buffer->obj
    |
    - (r)->virtual_start
    + r->buffer->virtual_start
    |
    - (r)->head
    + r->buffer->head
    |
    - (r)->tail
    + r->buffer->tail
    |
    - (r)->space
    + r->buffer->space
    |
    - (r)->size
    + r->buffer->size
    |
    - (r)->effective_size
    + r->buffer->effective_size
    |
    - (r)->last_retired_head
    + r->buffer->last_retired_head
    )

    @@
    expression E;
    @@
    (
    - LP_RING(E)->obj
    + LP_RING(E)->buffer->obj
    |
    - LP_RING(E)->virtual_start
    + LP_RING(E)->buffer->virtual_start
    |
    - LP_RING(E)->head
    + LP_RING(E)->buffer->head
    |
    - LP_RING(E)->tail
    + LP_RING(E)->buffer->tail
    |
    - LP_RING(E)->space
    + LP_RING(E)->buffer->space
    |
    - LP_RING(E)->size
    + LP_RING(E)->buffer->size
    |
    - LP_RING(E)->effective_size
    + LP_RING(E)->buffer->effective_size
    |
    - LP_RING(E)->last_retired_head
    + LP_RING(E)->buffer->last_retired_head
    )

Note: On top of this this patch also removes the now unused ringbuffer
fields in intel_engine_cs.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
[danvet: Add note about fixup patch included here.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the upcoming patches we plan to break the correlation between
engine command streamers (a.k.a. rings) and ringbuffers, so it
makes sense to refactor the code and make the change obvious.

No functional changes.
Signed-off-by: NOscar Mateo <oscar.mateo@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On gen2 the scanline counter behaves a bit differently from the
later generations. Instead of adding one to the raw scanline
counter value, we must subtract one.

On HSW/BDW the scanline counter requires a +2 adjustment on HDMI
outputs. DP outputs on the on the other require the typical +1
adjustment.

As the fixup we must apply to the hardware scanline counter
depends on several factors, compute the desired offset at modeset
time and tuck it away for when it's needed.

v2: Clarify HSW+ situation
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: "Akash Goel <akash.goels@gmail.com>"
Reviewed-by: "Sourab Gupta <sourabgupta@gmail.com>"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78997Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The docs are a bit lacking when it comes to describing when certain
timing related events occur in the hardware. Draw a picture which
tries to capture the most important ones.

v2: Clarify a few details (Imre)
v3: Add HSW+ HDMI scanline counter numbers
Acked-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NAkash Goel <akash.goels@gmail.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: "Sourab Gupta <sourabgupta@gmail.com>"
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently the logic to fix up the frame counter on gen3/4 assumes that
start of vblank occurs at vblank_start*htotal pixels, when in fact
it occurs htotal-hsync_start pixels earlier. Apply the appropriate
adjustment to make the frame counter more accurate.

Also fix the vblank start position for interlaced display modes.
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: "Akash Goel <akash.goels@gmail.com>"
Reviewed-by: "Sourab Gupta <sourabgupta@gmail.com>"
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In interlaced modes, the pixel counter counts all pixels,
so one field will have htotal more pixels. In order to avoid
the reported position from jumping backwards when the pixel
counter is beyond the length of the shorter field, just
clamp the position the length of the shorter field. This
matches how the scanline counter based position works since
the scanline counter doesn't count the two half lines.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: "Akash Goel <akash.goels@gmail.com>"
Reviewed-by: "Sourab Gupta <sourabgupta@gmail.com>"
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Checking whether the error interrupt was enabled or not isn't really
necessary when we check for uncleared FIFO underruns. If it was enabled
we'll race with the interrupt handler a bit, but that seems OK as we
still claim the interrupt.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

FIFO underruns don't generate interrupts on gmch platforms, so
if we want to know whether a modeset triggered FIFO underruns we
need to explicitly check for them.

As a modeset on one pipe could cause underruns on other pipes,
check for underruns on all pipes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
[danvet: Fix up merge error, kudos to Ville for noticing it.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

FIFO underruns don't generate an interrupt on gmch platforms, so we
should check whether there were any that we failed to notice when
we're disabling FIFO underrun reporting.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NThomas Wood <thomas.wood@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>