As discussed on LKML some notion of 'function' is needed in
LED naming. This patch adds this to the documentation and
standardises existing LED drivers.
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

There is no reason to have power control in a separate file from the
board setup code.  Merge it back into the board setup file and remove
superfluous header includes.

--
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There is no reason to have power control in a separate file from the
board setup code.  Merge it back into the board setup file and remove
superfluous header includes.

--
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

There is no reason to have power control in a separate file from the
board setup code.  Merge it back into the board setup file, removing
superfluous header includes and removing superfluous constants from
the machine header file.

--
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.

Sets up the corresponding platform data for the nslu2 and nas100d
boards, and reads the ethernet MAC address from the internal flash.

Tested on both little-endian and big-endian kernels.
Tested-by: NTom King <tom@websb.net>
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NMichael Westerhof <mwester@dls.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

These are the only three boards to use the IXP4XX-GPIO-LED driver, and
they can all use the new leds-gpio driver instead with no change in
functionality.

--
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Adds IXDP425 platform support for two built-in 10/100 Ethernet ports.

This patch will do nothing until the actual Ethernet driver is
also included.
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds drivers for IXP4xx hardware Queue Manager and for
Network Processor Engines. Requires patch #4712 (reading/writing
CPU feature (aka fuse) bits).

Posted to linux-arm-kernel on 2 Dec 2007 and revised.
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Register the i2c board info related to the RTC chip on the dsmg600
board to allow it to be found automatically on boot.
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Register the i2c board info related to the RTC chip on the nas100d
board to allow it to be found automatically on boot.
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Register the i2c board info related to the RTC chip on the nslu2 board
to allow it to be found automatically on boot.
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

 * Remove the superfluous declaration of ctrl_alt_del().
 * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
 * Perform the reset on the release of the power button, so that
   NAS devices which have been set to auto-power-on (by solder
   bridging the power button) do not continuously power cycle.
 * Remove all superflous constants from dsmg600.h
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

 * Convert GPIO and IRQ handling to use the <asm/gpio.h> api.
 * Perform the reset only after the power button has been held down
   for at least two seconds.  Do the reset on the release of the power
   button, so that NAS devices which have been set to auto-power-on (by
   solder bridging the power button) do not continuously power cycle.
 * Remove all superflous constants from nas100d.h
 * Add LED constants to nas100d.h while we're there.
 * Update the board LED setup code to use those constants.
Signed-off-by: NRod Whitby <rod@whitby.id.au>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing
the arch-neutral GPIO API (linux/i2c-gpio.h).

Tested by the nslu2-linux and openwrt projects in public firmware releases.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Acked-by: NRod Whitby <rod@whitby.id.au>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NLucas Woods <woodzy@gmail.com>
Acked-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add proper support for CLOCK_EVT_MODE_RESUME and in the process fix
CLOCK_EVT_MODE_SHUTDOWN so that only the enable bits are toggled for both.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

We need to make sure, that the clockevent devices are resumed, before
the tick is resumed. The current resume logic does not guarantee this.

Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock
event devices before resuming the tick / oneshot functionality.

Fixup the existing users.

Thanks to Nigel Cunningham for tracking down a long standing thinko,
which affected the jinxed VAIO.

[akpm@linux-foundation.org: xen build fix]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I believe that the following patch is necessary to properly configure
GPIO line configuration for IRQ's which are mapped to a GPIO line >= 8
(without this patch the wrong GPIO is configured as an input.)
Signed-off-by: NTim Harvey <tim_harvey@yahoo.com>
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch fixes up compiling of the gtwx5715 board setup code,
which has apparently been broken since 2.6.18 and the generic
IRQ changes. In addition it removes some unecessary extern
declarations in the gtwx5715-pci.c file.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series.

This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected.

Updated to stay below the 80 char limit in uncompress.h
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Signed-off-by: NDeepak Saxena <dsaxena@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch provides support for the Gateway 7001 AccessPoint series.

Updated to stay below the 80 char limit in uncompress.h
Signed-off-by: NImre Kaloz <kaloz@openwrt.org>
Signed-off-by: NDeepak Saxena <dsaxena@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

IXDP425 NAND support (arch specific part).

The generic platform driver that is used by ixdp425 platfrom is already
in upstream kernel in 2.6.22-rc1.
Signed-off-by: NVladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: NRuslan Sushko <rsushko@ru.mvista.com>
Signed-off-by: NDeepak Saxena <dsaxena@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch removes apparently unnecessary extern declarations in
coyote-pci.c and ixdpg425-pci.c within arch/arm/mach-ixp4xx and
has been compile-tested without producing warnings or errors.

Kernel coding style forbids the use of extern declarations within .c
files.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This trivial patch updates the nslu2 and nas-100d headers to
remove pointless GPIO defines, and updates nslu2-setup.c
accordingly. In addition minor style cleanups to some comments
are included.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch is required as the frequency fixup in nslu2_init does not
run sufficiently early in the boot sequence to take effect. In addition
the dsmg600 setup code behaviour has been improved such that a
'fixup' routine is avoided.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avila and IXDP4xx support were separated in 2.6.21 so this comment
isn't correct any more.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Spelling fixes in arch/arm/.
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add IRQF_IRQPOLL for each timer interrupt.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support for the D-Link DSM-G600 Rev A.
This is an ARM XScale IXP4xx system relatively similar to
the NSLU2 and NAS-100D already supported by mainline. An
important difference is Gigabit Ethernet support using
the Via Velocity chipset.

This patch is the combined work of Michael Westerhof and
Alessandro Zummo, with contributions from Michael-Luke
Jones. This version addresses review comments from rmk
and Deepak Saxena.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NMichael Westerhof <mwester@dls.net>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update ixp4xx timer support to use new clockevent infrastructure.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add Intel KIXRP435 Reference Platform based on IXP43x processor.
Fixed after review : access to cp15 removed in identification functions,
used access to global processor_id instead
Signed-off-by: NVladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: NRuslan  Sushko <rsushko@ru.mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch brings generic gpio layer support to ixp4xx. It creates
functions needed for gpio->irq and irq->gpio translation.

It expects and initial value to be passed to
gpio_direction_output() which has been introduced by
commit 28735a72 in Linus git tree.

Generic gpio layer is going to be used by pxa2xx_udc driver.
Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fixup the is_contionous replacement by a flag field.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the platform resources required to support the
ixp4xx-pata-cf libata driver on Avila Gateworks boards.
Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch adds support for the Gateworks Avila Network Platform in
a separate set of setup files to the IXDP425. This is necessary now
that a driver for the Avila CF card slot is available. It also adds
support for a minor variant on the Avila board known as the Loft,
which has a different number of maximum PCI devices.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch removes references to the Gateworks Avila Network
Platform in the ixdp425 setup code. Avila setup should occur
separately now that a CF ATA device driver is available.
Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Rather than using a device_initcall() for the clocksource initialization, just call the init from the sys_timer init function.
Signed-off-by: NKevin Hilman <khilman@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Create include/asm-arm/arch-ixp4xx/udc.h and
add platfrom device ixp4xx_udc_device into
arch/arm/mach-ixp4xx/common.c.

This allows us to use pxa2xx-udc on
the ixp4xx platfrom. Both pxa2xx and
ixp4xx use the same device controller.
Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

set_irq_chipdata -> set_irq_chip_data
get_irq_chipdata -> get_irq_chip_data
do_level_IRQ -> handle_level_irq
do_edge_IRQ -> handle_edge_irq
do_simple_IRQ -> handle_simple_irq
irqdesc -> irq_desc
irqchip -> irq_chip
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>