- 04 2月, 2006 10 次提交
-
-
由 Joel Becker 提交于
configfs always made item and attribute ownership root.root and permissions based on a umask of 022. Add ->setattr() to allow chown(2)/chmod(2), and persist the changes for the lifetime of the items and attributes. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
Fix a couple of compile warnings found when compiling on a ppc64 build box. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Adrian Bunk 提交于
fs/ocfs2/dlm/dlmrecovery.c does now use msleep(), and does therefore need to #include <linux/delay.h> for getting the prototype of this function. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Arjan van de Ven 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NArjan van de Ven <arjan@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Kurt Hackel 提交于
* fix a hang which can occur during shutdown migration * do not allow nodes to join during recovery * when restarting lock mastery, do not ignore nodes which come up * more than one node could become recovery master, fix this * sleep to allow some time for heartbeat state to catch up to network * extra debug info for bad recovery state problems * make DLM_RECO_NODE_DATA_DONE a valid state for non-master recovery nodes * prune all locks from dead nodes on $RECOVERY lock resources * do NOT automatically add new nodes to mle nodemaps until they have properly joined the domain * make sure dlm_pick_recovery_master only exits when all nodes have synced * properly handle dlmunlock errors in dlm_pick_recovery_master * do not propagate network errors in dlm_send_begin_reco_message * dead nodes were not being put in the recovery map sometimes, fix this * dlmunlock was failing to clear the unlock actions on DLM_DENIED Signed-off-by: NKurt Hackel <kurt.hackel@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Mark Fasheh 提交于
ip_io_sem is now ip_io_mutex. Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Jeff Mahoney 提交于
Including <asm/signal.h> results in compilation failure on ia64 due to not including <linux/compiler.h> Including <linux/signal.h> corrects the problem. Please apply. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Adrian Bunk 提交于
Functions called by __init funtions mustn't be __exit. Reported by Jan-Benedict Glaw <jbglaw@lug-owl.de>. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
- 02 2月, 2006 23 次提交
-
-
由 Stephen Rothwell 提交于
Most of the 64 bit architectures will zero extend the first argument to compat_sys_{openat,newfstatat,futimesat} which will fail if the 32 bit syscall was passed AT_FDCWD (which is a small negative number). Declare the first argument to be an unsigned int which will force the correct sign extension when the internal functions are called in each case. Also, do some small white space cleanups in fs/compat.c. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dirk Mueller 提交于
Only do a sync_retry if the memcmp failed. Signed-off-by: NDirk Mueller <dmueller@suse.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If the server returns NLM_LCK_DENIED_NOLOCKS, we currently retry the entire NLM_CANCEL request. This may end up looping forever unless the server changes its mind (why would it do that, though?). Ensure that we limit the number of retries (to 3). See bug# 5957 in bugzilla.kernel.org. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The OpenGroup docs state that the arguments "block", "exclusive" and "alock" must exactly match the arguments for the lock call that we are trying to cancel. Currently, "block" is always set to false, which is wrong. See bug# 5956 on bugzilla.kernel.org. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Martin Waitz 提交于
Update some parameter descriptions to actually match the code. Signed-off-by: NMartin Waitz <tali@admingilde.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Mahoney 提交于
When a filesystem has been converted from 3.5.x to 3.6.x, we need an extra check during file write to make sure we are not trying to make a 3.5.x file > 2GB. Signed-off-by: NChris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Mason 提交于
reiserfs: journal_transaction_should_end should increase the count of blocks allocated so the transaction subsystem can keep new writers from creating a transaction that is too large. Signed-off-by: NChris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Mason 提交于
write_ordered_buffers should handle dirty non-uptodate buffers without a BUG() Signed-off-by: NChris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Mason 提交于
In data=journal mode, reiserfs writepage needs to make sure not to trigger transactions while being run under PF_MEMALLOC. This patch makes sure to redirty the page instead of forcing a transaction start in this case. Also, calling filemap_fdata* in order to trigger io on the block device can cause lock inversions on the page lock. Instead, do simple batching from flush_commit_list. Signed-off-by: NChris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Mason 提交于
The b_private field in buffer heads needs to be zero filled when the buffers are allocated. Thanks to Nathan Scott for finding this. It was causing problems on systems with both XFS and reiserfs. Signed-off-by: NChris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Mason 提交于
After a transaction has closed but before it has finished commit, there is a window where data=ordered mode requires invalidatepage to pin pages instead of freeing them. This patch fixes a race between the invalidatepage checks and data=ordered writeback, and it also adds a check to the reiserfs write_ordered_buffers routines to write any anonymous buffers that were dirtied after its first writeback loop. That bug works like this: proc1: transaction closes and a new one starts proc1: write_ordered_buffers starts processing data=ordered list proc1: buffer A is cleaned and written proc2: buffer A is dirtied by another process proc2: File is truncated to zero, page A goes through invalidatepage proc2: reiserfs_invalidatepage sees dirty buffer A with reiserfs journal head, pins it proc1: write_ordered_buffers frees the journal head on buffer A At this point, buffer A stays dirty forever Signed-off-by: NChris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
Use the generic_permission code with a proper wrapper and callback instead of having a local copy. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
This function is completely unused since the xattr permission checking changes. Remove it and fold __reiserfs_permission into reiserfs_permission. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Diego Calleja 提交于
According to http://bugzilla.kernel.org/show_bug.cgi?id=5778 fs/reiserfs/file.c is missing this check. Signed-off-by: NDiego Calleja <diegocg@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Chris Mason <mason@suse.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch replaces yield and retry loop with __GFP_NOFAIL in alloc_journal_list(). Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
Remove kmalloc() wrapper from fs/reiserfs/. Please note that a reiserfs /proc entry format is changed because kmalloc statistics is removed. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Lameter 提交于
Migrate a page with buffers without requiring writeback This introduces a new address space operation migratepage() that may be used by a filesystem to implement its own version of page migration. A version is provided that migrates buffers attached to pages. Some filesystems (ext2, ext3, xfs) are modified to utilize this feature. The swapper address space operation are modified so that a regular migrate_page() will occur for anonymous pages without writeback (migrate_pages forces every anonymous page to have a swap entry). Signed-off-by: NMike Kravetz <kravetz@us.ibm.com> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hugh Dickins 提交于
2.6.15's hugepage faulting introduced huge_pages_needed accounting into hugetlbfs: to count how many pages are already in cache, for spot check on how far a new mapping may be allowed to extend the file. But it's muddled: each hugepage found covers HPAGE_SIZE, not PAGE_SIZE. Once pages were already in cache, it would overshoot, wrap its hugepages count backwards, and so fail a harmless repeat mapping with -ENOMEM. Fixes the problem found by Don Dupuis. Signed-off-by: NHugh Dickins <hugh@veritas.com> Acked-By: NAdam Litke <agl@us.ibm.com> Acked-by: NWilliam Irwin <wli@holomorphy.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
OpenBSD doesn't see "." correctly in directories created by Linux. Copying files over several KB will buy you infinite loop in __getblk_slow(). Copying files smaller than 1 KB seems to be OK. Sometimes files will be filled with zeros. Sometimes incorrectly copied file will reappear after next file with truncated size. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
fs/compat.c: In function `compat_sys_pselect7': fs/compat.c:1820: warning: passing arg 5 of `compat_core_sys_select' from incompatible pointer type Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
While asynchronous reads mean a performance improvement in most cases, if the filesystem assumed that reads are synchronous, then async reads may degrade performance (filesystem may receive reads out of order, which can confuse it's own readahead logic). With sshfs a 1.5 to 4 times slowdown can be measured. There's also a need for userspace filesystems to know whether asynchronous reads are supported by the kernel or not. To achive these, negotiate in the INIT request whether async reads will be used and the maximum readahead value. Update interface version to 7.6 If userspace uses a version earlier than 7.6, then disable async reads, and set maximum readahead value to the maximum read size, as done in previous versions. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
An old patch designed to fix http://bugme.osdl.org/show_bug.cgi?id=4497, "getdents gives empty/random result upon signal". If smbfs's readdir() is interupted by a signal, smb_readdir() failed to noticed that and proceeded to treat the unread-into page as valid directory contents. Fix that up by handling the -ERESTARTSYS. Thanks to Stian Skjelstad for reporting and testing. Cc: Stian Skjelstad <stian@nixia.no> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Gruenbacher 提交于
A recent patch to Allow run-time selection of NFS versions to export meant that NO nfsacl service versions were exported. This patch restored that functionality. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 2月, 2006 2 次提交
-
-
由 Nathan Scott 提交于
occur during log replay. Novell bug 145204, Fedora bug 177848. SGI-PV: 948860 SGI-Modid: xfs-linux-melb:xfs-kern:25064a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Yingping Lu 提交于
creation due to ENOSPC. The current solution removes the inode when the attribute insertion fails. Long term solution would be to make the inode creation and attribute insertion atomic. SGI-PV: 947610 SGI-Modid: xfs-linux-melb:xfs-kern:205193a Signed-off-by: NYingping Lu <yingping@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
- 31 1月, 2006 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 28 1月, 2006 2 次提交
-
-
由 Steve French 提交于
Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
由 Steve French 提交于
-
- 25 1月, 2006 1 次提交
-
-
由 Steve French 提交于
typically - header + 13 pages). Forgetting to set wsize on the mount command costs more than 10% on large write (can be much more) so this makes a saner default. We still shrink this default smaller if server can not support it. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-
- 24 1月, 2006 1 次提交
-
-
由 Steve French 提交于
Could cause memory leak in some readpaths depending on what junk followed it in the stack. Signed-off-by: NSteve French <sfrench@us.ibm.com>
-