1. 19 8月, 2008 1 次提交
  2. 25 7月, 2008 1 次提交
    • A
      PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures · 27ac792c
      Andrea Righi 提交于
      On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
      boundary. For example:
      
      	u64 val = PAGE_ALIGN(size);
      
      always returns a value < 4GB even if size is greater than 4GB.
      
      The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
      example):
      
      #define PAGE_SHIFT      12
      #define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
      #define PAGE_MASK       (~(PAGE_SIZE-1))
      ...
      #define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)
      
      The "~" is performed on a 32-bit value, so everything in "and" with
      PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
      Using the ALIGN() macro seems to be the right way, because it uses
      typeof(addr) for the mask.
      
      Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
      include/linux/mm.h.
      
      See also lkml discussion: http://lkml.org/lkml/2008/6/11/237
      
      [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
      [akpm@linux-foundation.org: fix v850]
      [akpm@linux-foundation.org: fix powerpc]
      [akpm@linux-foundation.org: fix arm]
      [akpm@linux-foundation.org: fix mips]
      [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
      [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
      [akpm@linux-foundation.org: fix powerpc]
      Signed-off-by: NAndrea Righi <righi.andrea@gmail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      27ac792c
  3. 29 4月, 2008 13 次提交
  4. 07 2月, 2008 1 次提交
  5. 01 2月, 2008 1 次提交
  6. 14 11月, 2007 1 次提交
  7. 19 10月, 2007 1 次提交
  8. 02 10月, 2007 1 次提交
  9. 20 7月, 2007 1 次提交
  10. 17 6月, 2007 1 次提交
  11. 30 5月, 2007 2 次提交
  12. 26 4月, 2007 2 次提交
  13. 13 2月, 2007 1 次提交
  14. 11 12月, 2006 1 次提交
  15. 09 12月, 2006 1 次提交
  16. 03 12月, 2006 1 次提交
  17. 22 11月, 2006 2 次提交
    • D
      WorkStruct: Pass the work_struct pointer instead of context data · 65f27f38
      David Howells 提交于
      Pass the work_struct pointer to the work function rather than context data.
      The work function can use container_of() to work out the data.
      
      For the cases where the container of the work_struct may go away the moment the
      pending bit is cleared, it is made possible to defer the release of the
      structure by deferring the clearing of the pending bit.
      
      To make this work, an extra flag is introduced into the management side of the
      work_struct.  This governs auto-release of the structure upon execution.
      
      Ordinarily, the work queue executor would release the work_struct for further
      scheduling or deallocation by clearing the pending bit prior to jumping to the
      work function.  This means that, unless the driver makes some guarantee itself
      that the work_struct won't go away, the work function may not access anything
      else in the work_struct or its container lest they be deallocated..  This is a
      problem if the auxiliary data is taken away (as done by the last patch).
      
      However, if the pending bit is *not* cleared before jumping to the work
      function, then the work function *may* access the work_struct and its container
      with no problems.  But then the work function must itself release the
      work_struct by calling work_release().
      
      In most cases, automatic release is fine, so this is the default.  Special
      initiators exist for the non-auto-release case (ending in _NAR).
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      65f27f38
    • D
      WorkStruct: Separate delayable and non-delayable events. · 52bad64d
      David Howells 提交于
      Separate delayable work items from non-delayable work items be splitting them
      into a separate structure (delayed_work), which incorporates a work_struct and
      the timer_list removed from work_struct.
      
      The work_struct struct is huge, and this limits it's usefulness.  On a 64-bit
      architecture it's nearly 100 bytes in size.  This reduces that by half for the
      non-delayable type of event.
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      52bad64d
  18. 11 10月, 2006 1 次提交
  19. 02 10月, 2006 1 次提交
  20. 01 10月, 2006 1 次提交
    • D
      [PATCH] BLOCK: Make it possible to disable the block layer [try #6] · 9361401e
      David Howells 提交于
      Make it possible to disable the block layer.  Not all embedded devices require
      it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
      the block layer to be present.
      
      This patch does the following:
      
       (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
           support.
      
       (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
           an item that uses the block layer.  This includes:
      
           (*) Block I/O tracing.
      
           (*) Disk partition code.
      
           (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
      
           (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
           	 block layer to do scheduling.  Some drivers that use SCSI facilities -
           	 such as USB storage - end up disabled indirectly from this.
      
           (*) Various block-based device drivers, such as IDE and the old CDROM
           	 drivers.
      
           (*) MTD blockdev handling and FTL.
      
           (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
           	 taking a leaf out of JFFS2's book.
      
       (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
           linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
           however, still used in places, and so is still available.
      
       (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
           parts of linux/fs.h.
      
       (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
      
       (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
      
       (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
           is not enabled.
      
       (*) fs/no-block.c is created to hold out-of-line stubs and things that are
           required when CONFIG_BLOCK is not set:
      
           (*) Default blockdev file operations (to give error ENODEV on opening).
      
       (*) Makes some /proc changes:
      
           (*) /proc/devices does not list any blockdevs.
      
           (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
      
       (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
      
       (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
           given command other than Q_SYNC or if a special device is specified.
      
       (*) In init/do_mounts.c, no reference is made to the blockdev routines if
           CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.
      
       (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
           error ENOSYS by way of cond_syscall if so).
      
       (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
           CONFIG_BLOCK is not set, since they can't then happen.
      Signed-Off-By: NDavid Howells <dhowells@redhat.com>
      Signed-off-by: NJens Axboe <axboe@kernel.dk>
      9361401e
  21. 04 7月, 2006 1 次提交
  22. 01 7月, 2006 1 次提交
  23. 10 4月, 2006 1 次提交
  24. 12 1月, 2006 1 次提交
  25. 04 1月, 2006 1 次提交