This patch (as1240) adds the NOGET quirk for three devices from CH
Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim
yoke.  Without these quirks, the devices haven't worked for many
kernel releases.  Sometimes replugging them after boot-up would get
them to work and sometimes they wouldn't work at all.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NSean Hildebrand <silverwraithii@gmail.com>
Reported-by: NSid Boyce <sboyce@blueyonder.co.uk>
Tested-by: NSean Hildebrand <silverwraithii@gmail.com>
Tested-by: NSid Boyce <sboyce@blueyonder.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Genius PenSketch 12x9 tablet has a puck (labeled a
"Tablet Mouse") in addition to a pen. Without registering a quirk
the tablet appears to be a single input device that reports the
wrong axis information in /proc/bus/input/devices, and sends
incorrect events (e.g. ABS_Z instead of ABS_Y). This information
confuses the X evdev driver and makes the device impossible to
use.

The quirk fixes events and splits the device into multiple input
event devices so that at least the puck is useful.
Signed-off-by: NMatt Helsley <matt.helsley@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move the force feedback processing into a separate module.

[jkosina@suse.cz: fix Kconfig texts a little bit]
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This seems to be the very same device, as already supported Smartjoy
dual Plus, but with slightly different vendor ID. Let's support this
one too.
Reported-by: NDavid Ashley <dashxdr@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove support for both dynamic and static report descriptor
quirks. There is no longer rdesc code which it would support,
so it's useless.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move them from the core code to a separate driver.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move them from the core code to a separate driver.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move them from the core and input code to a separate driver.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move ids from hid-quirks.c into separate file, since it will be needed in
more than one place.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This driver adds support for the multitouch trackpad on the new
Apple Macbook Air and Macbook Pro Penryn laptops. It replaces the
appletouch driver on those computers, and integrates well with the
synaptics driver of the Xorg system.

[dtor@mail.ru: various cleanups]
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Logitech DiNovo desktop needs the same quirk as other DiNovo
devices.
Reported-by: NFarid Benamrouche <farid.benamrouche@free.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Some Logitech mice have a tilt wheel which register as HWHEEL buttons.
The events are positive for a click to the right and negative for a
click to the left. Applications expect the opposite, though.

I suspect this affects a lot more Logitech mice, but these are the only
two I have. I tested this using evtest and a GTK application. A similar
Microsoft Intellimouse I have works correctly.
Signed-off-by: NDan Nicholson <dbn.lists@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Added device ids to hid-quriks for detection of keyboards on 4th
generation Macbook Pro and Macbook Air

The naming scheme is consistent with past Apple keyboards in hid-quirks;
as defined by Apple (including device ids) in:
/System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/Co
ntents/Info.plist
Patch was originally posted and tested at:
https://bugs.launchpad.net/mactel-support/+bug/207127Signed-off-by: NAlexandre Karpenko <alexander@comm.utoronto.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The new iMON LCDs from SoundGraph need to be blacklisted from HID in order to
be used by lirc.
Signed-off-by: NDylan R Semler <dylan.semler@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microchip PICkit 1 and PICKit 2 USB Programmers are USB HID class of device but
they are not real HID device. They are now supported by libusb based programs
like the following programs.

pk2 and pk2cmd Linux port:
	http://home.pacbell.net/theposts/picmicro/
usb_pickit:
	http://tfc.duke.free.fr/pickit.html
usb_pickit original version:
	http://charm.cs.uiuc.edu/users/olawlor/projects/2003/microchip/

Therefore it ispreferred to blacklist them.
Signed-off-by: NXiaofan Chen <xiaofanc@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Since 2.6.25 the HID_QUIRK_APPLE_HAS_FN quirk is enabled even for
non-laptop Apple keyboards of the Aluminium series. The USB version of
these don't need Numlock emulation, like the laptop (and Aluminium
Wireless) do, as they have a proper keypad.

This patch splits the Numlock emulation for Apple keyboards in a
different quirk flag, so that it can be enabled for all the keyboards
but the Aluminium USB ones.

If the Numlock emulation is enabled for Aluminium USB keyboards, the
JKL and UIO keys become the numeric pad, and the rest of the keyboard
is disabled, included the key used to disable Numlock.

Additionally, these keyboard should not have a Numlock at all, as the
Numlock key is instead replaced by the 'Clear' key as usual for Apple
USB keyboards.
Signed-off-by: NDiego 'Flameeyes' Petteno <flameeyes@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Fix a typo in report descriptor fixup, which results in improper
substitution and leaving old value in place.
Reported-by: NJuha Motorsportcom <juha_motorsportcom@luukku.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Samsung USB remotes (0419:0001) report six keys via standard HID usage pages
(arrow keys, OK, Power).  Kernel 2.6.25 maps those to input events (in addition
to the hiddev report).  The remaining 43 keys are reported via proprietary HID
report page and therefore by hiddev only.

Applications using hiddev and input device might process the 6 standard keys
twice.  To avoid this, the input device will be suppressed for the Samsung
remote with a quirk entry, forcing to use the hiddev device only.

LIRC already contains the proper support.
Signed-off-by: NRobert Schedel <r.schedel@yahoo.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Jeremy Robertson reports that GTCO engineers made a mistake and we don't
need 0x60x GTCO product ids blacklisted.

This mostly reverts dda3fd35, but leaves PID 0x1007 intact.
Reported-by: NJeremy Roberson <jeremy.roberson@einstruction.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

WiseGroup Ltd, MP-8866 Dual Joypad needs to skip output reports,
as it contains force-feedback output reports.
Reported-by: NAnssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Logitech diNovo Mini needs DUPLICATE_USAGES quirk.
Reported-by: NTom Horsley <tom.horsley@att.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch makes the following needlessly global functions static:
- hid-core.c:hid_input_field()
- usbhid/hid-quirks.c:usbhid_modify_dquirk()
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This moves the misplaced rdesc quirk to the place where it belongs.
Reported-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This must be the weirdest failure yet. My external disk stops processing
the storage commands the moment it receives a GET_REPORT. The firmware
does not crash; if I do rmmod hid, then SET-INTERFACE restores normal
operations. Still, I cannot live without the keyboard when I want backup
my files. Adding the NOGET quirk fixes this problem for me.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device has reports lower logical maximum compared to the real
usages for Zoom+ and Zoom- it emits.

This patch bumps the values in the report descriptor up, and also
adjusts HID_MAX_USAGE accordingly.
Reported-by: NKhelben Blackstaff <eye.of.the.8eholder@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microsoft's wireless desktop receiver (Model 1028) has a bug in the report
descriptor -- namely, in four seperate places it uses USAGE_MIN and _MAX when
it quite obviously doesn't intend to.

In other words, it reports that it has pretty much _everything_ in 'consumer'
and 'generic desktop'.  And then the X evdev driver believes I have a mouse
with 36 absolute axes and a huge pile of keys and buttons, when I in fact,
should have zero.  255/256 in three of the cases, and 0-1024 in another.

This patch fixes the report descriptor of this device before it enters the HID
parser.
Signed-off-by: NJim Duchek <jim.duchek@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Many vendors highspeed devices give erroneously fullspeed interval value in
endpoint descriptor for interrupt endpoints. This quirk fixes up that by
recalculating the right value for highspeed device.

At the time of hid configuration this quirk calculates which highspeed interval
value gives same interval delay as, or next smaller then, what it would be if
the original value would be interpreted as fullspeed value. In subsequent urbs
that new value is used instead.

Forming the 'hid->name' in usb_hid_config() was moved up to accommodate more
descriptive printk reporting the fixup.

In this patch the quirk is set for one such device: Afatech DVB-T 2 infrared
HID-keyboard. It reports value 16 which means 4,069s in highspeed while
obviously 16ms was intended. In this case quirk calculates new value to be 8
which gives when interpreted as highspeed value 16ms as wanted. The behavior of
the device was verified to be what expected both before and after the patch.
Signed-off-by: NPekka Sarnila <sarnila@adit.fi>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

USBHID driver only supports relative mode with this tablet so let aiptek
module handle it.
Signed-off-by: NDmitry Guryanov <guryanov@dgap.mipt.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>