The tricky locking for disposing of a dentry is duplicated 3 times in the
dcache (dput, pruning a dentry from the LRU, and pruning its ancestors).
Consolidate them all into a single function dentry_kill.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Signed-off-by: NNick Piggin <npiggin@kernel.dk>

prune_one_dentry can avoid quite a bit of locking in the common case where
ancestors have an elevated refcount. Alternatively, we could have gone the
other way and made fewer trylocks in the case where d_count goes to zero, but
is probably less common.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Use RCU to simplify locking in dget_parent.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

dget_locked was a shortcut to avoid the lazy lru manipulation when we already
held dcache_lock (lru manipulation was relatively cheap at that point).
However, how that the lru lock is an innermost one, we never hold it at any
caller, so the lock cost can now be avoided. We already have well working lazy
dcache LRU, so it should be fine to defer LRU manipulations to scan time.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

dcache_inode_lock can be avoided in d_delete() and d_materialise_unique()
in cases where it is not required.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Signed-off-by: NNick Piggin <npiggin@kernel.dk>

It is possible to run dput without taking data structure locks up-front. In
many cases where we don't kill the dentry anyway, these locks are not required.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Long lived dcache "multi-step" operations which retry on rename seq can
be starved with a lot of rename activity. If they fail after the 1st pass,
take the rename_lock for writing to avoid further starvation.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

dcache_lock no longer protects anything. remove it.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

The remaining usages for dcache_lock is to allow atomic, multi-step read-side
operations over the directory tree by excluding modifications to the tree.
Also, to walk in the leaf->root direction in the tree where we don't have
a natural d_lock ordering.

This could be accomplished by taking every d_lock, but this would mean a
huge number of locks and actually gets very tricky.

Solve this instead by using the rename seqlock for multi-step read-side
operations, retry in case of a rename so we don't walk up the wrong parent.
Concurrent dentry insertions are not serialised against.  Concurrent deletes
are tricky when walking up the directory: our parent might have been deleted
when dropping locks so also need to check and retry for that.

We can also use the rename lock in cases where livelock is a worry (and it
is introduced in subsequent patch).
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Cover d_name with d_lock in more cases, where there may be concurrent
modification to it.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Add a new lock, dcache_inode_lock, to protect the inode's i_dentry list
from concurrent modification. d_alias is also protected by d_lock.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Protect d_subdirs and d_child with d_lock, except in filesystems that aren't
using dcache_lock for these anyway (eg. using i_mutex).

Note: if we change the locking rule in future so that ->d_child protection is
provided only with ->d_parent->d_lock, it may allow us to reduce some locking.
But it would be an exception to an otherwise regular locking scheme, so we'd
have to see some good results. Probably not worthwhile.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Protect d_unhashed(dentry) condition with d_lock. This means keeping
DCACHE_UNHASHED bit in synch with hash manipulations.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Make d_count non-atomic and protect it with d_lock. This allows us to ensure a
0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when
we start protecting many other dentry members with d_lock.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Add a new lock, dcache_lru_lock, to protect the dcache LRU list from concurrent
modification. d_lru is also protected by d_lock, which allows LRU lists to be
accessed without the lru lock, using RCU in future patches.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Add a new lock, dcache_hash_lock, to protect the dcache hash table from
concurrent modification. d_hash is also protected by d_lock.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Remove dcache_lock locking from hostfs filesystem, and move it into dcache
helpers. All that is required is a coherent path name. Protection from
concurrent modification of the namespace after path name generation is not
provided in current code, because dcache_lock is dropped before the path is
used.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Change d_hash so it may be called from lock-free RCU lookups. See similar
patch for d_compare for details.

For in-tree filesystems, this is just a mechanical change.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Change d_compare so it may be called from lock-free RCU lookups. This
does put significant restrictions on what may be done from the callback,
however there don't seem to have been any problems with in-tree fses.
If some strange use case pops up that _really_ cannot cope with the
rcu-walk rules, we can just add new rcu-unaware callbacks, which would
cause name lookup to drop out of rcu-walk mode.

For in-tree filesystems, this is just a mechanical change.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

smpfs and ncpfs want to update a live dentry name in-place. Rather than
have them open code the locking, provide a documented dcache API.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

Change d_delete from a dentry deletion notification to a dentry caching
advise, more like ->drop_inode. Require it to be constant and idempotent,
and not take d_lock. This is how all existing filesystems use the callback
anyway.

This makes fine grained dentry locking of dput and dentry lru scanning
much simpler.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

percpu_counter library generates quite nasty code, so unless you need
to dynamically allocate counters or take fast approximate value, a
simple per cpu set of counters is much better.

The percpu_counter can never be made to work as well, because it has an
indirection from pointer to percpu memory, and it can't use direct
this_cpu_inc interfaces because it doesn't use static PER_CPU data, so
code will always be worse.

In the fastpath, it is the difference between this:

        incl %gs:nr_dentry      # nr_dentry

and this:

        movl    percpu_counter_batch(%rip), %edx        # percpu_counter_batch,
        movl    $1, %esi        #,
        movq    $nr_dentry, %rdi        #,
        call    __percpu_counter_add    # (plus I clobber registers)

__percpu_counter_add:
        pushq   %rbp    #
        movq    %rsp, %rbp      #,
        subq    $32, %rsp       #,
        movq    %rbx, -24(%rbp) #,
        movq    %r12, -16(%rbp) #,
        movq    %r13, -8(%rbp)  #,
        movq    %rdi, %rbx      # fbc, fbc
#APP
# 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1
        movq %gs:kernel_stack,%rax      #, pfo_ret__
# 0 "" 2
#NO_APP
        incl    -8124(%rax)     # <variable>.preempt_count
        movq    32(%rdi), %r12  # <variable>.counters, tcp_ptr__
#APP
# 78 "lib/percpu_counter.c" 1
        add %gs:this_cpu_off, %r12      # this_cpu_off, tcp_ptr__
# 0 "" 2
#NO_APP
        movslq  (%r12),%r13     #* tcp_ptr__, tmp73
        movslq  %edx,%rax       # batch, batch
        addq    %rsi, %r13      # amount, count
        cmpq    %rax, %r13      # batch, count
        jge     .L27    #,
        negl    %edx    # tmp76
        movslq  %edx,%rdx       # tmp76, tmp77
        cmpq    %rdx, %r13      # tmp77, count
        jg      .L28    #,
.L27:
        movq    %rbx, %rdi      # fbc,
        call    _raw_spin_lock  #
        addq    %r13, 8(%rbx)   # count, <variable>.count
        movq    %rbx, %rdi      # fbc,
        movl    $0, (%r12)      #,* tcp_ptr__
        call    _raw_spin_unlock        #
.L29:
#APP
# 216 "/home/npiggin/usr/src/linux-2.6/arch/x86/include/asm/thread_info.h" 1
        movq %gs:kernel_stack,%rax      #, pfo_ret__
# 0 "" 2
#NO_APP
        decl    -8124(%rax)     # <variable>.preempt_count
        movq    -8136(%rax), %rax       #, D.14625
        testb   $8, %al #, D.14625
        jne     .L32    #,
.L31:
        movq    -24(%rbp), %rbx #,
        movq    -16(%rbp), %r12 #,
        movq    -8(%rbp), %r13  #,
        leave
        ret
        .p2align 4,,10
        .p2align 3
.L28:
        movl    %r13d, (%r12)   # count,*
        jmp     .L29    #
.L32:
        call    preempt_schedule        #
        .p2align 4,,6
        jmp     .L31    #
        .size   __percpu_counter_add, .-__percpu_counter_add
        .p2align 4,,15
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

The nr_unused counters count the number of objects on an LRU, and as such they
are synchronized with LRU object insertion and removal and scanning, and
protected under the LRU lock.

Making it per-cpu does not actually get any concurrency improvements because of
this lock, and summing the counter is much slower, and
incrementing/decrementing it costs more code size and is slower too.

These counters should stay per-LRU, which currently means global.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

d_validate has been broken for a long time.

kmem_ptr_validate does not guarantee that a pointer can be dereferenced
if it can go away at any time. Even rcu_read_lock doesn't help, because
the pointer might be queued in RCU callbacks but not executed yet.

So the parent cannot be checked, nor the name hashed. The dentry pointer
can not be touched until it can be verified under lock. Hashing simply
cannot be used.

Instead, verify the parent/child relationship by traversing parent's
d_child list. It's slow, but only ncpfs and the destaged smbfs care
about it, at this point.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

This reverts commit 3825bdb7.

You cannot dget() a dentry without having a reference, or holding
a lock that guarantees it remains valid.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>

d_validate does a purely read lookup in the dentry hash, so use RCU read side
locking instead of dcache_lock.  Split out from a larget patch by
Nick Piggin <npiggin@suse.de>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Always do a list_del_init on the LRU to make sure the list_empty invariant for
not beeing on the LRU always holds true, and fold dentry_lru_del_init into
dentry_lru_del.  Replace the dentry_lru_add_tail primitive with a
dentry_lru_move_tail operations that simpler when the dentry already is one
the list, which is always is.  Move the list_empty into dentry_lru_add to
fit the scheme of the other lru helpers, and simplify locking once we
move to a separate LRU lock.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Currently __shrink_dcache_sb has an extremly awkward calling convention
because it tries to please very different callers.  Split out the
main loop into a shrink_dentry_list helper, which gets called directly
from shrink_dcache_sb for the cases where all dentries need to be pruned,
or from __shrink_dcache_sb for pruning only a certain number of dentries.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

dentry referenced bit is only set when installing the dentry back
onto the LRU. However with lazy LRU, the dentry can already be on
the LRU list at dput time, thus missing out on setting the referenced
bit. Fix this.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The nr_dentry stat is a globally touched cacheline and atomic operation
twice over the lifetime of a dentry. It is used for the benfit of userspace
only. Turn it into a per-cpu counter and always decrement it in d_free instead
of doing various batching operations to reduce lock hold times in the callers.

Based on an earlier patch from Nick Piggin <npiggin@suse.de>.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove d_callback and always call __d_free with a RCU head.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All callers take dcache_lock just around the call to __d_path, so
take the lock into it in preparation of getting rid of dcache_lock.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: brlock vfsmount_lock

Use a brlock for the vfsmount lock. It must be taken for write whenever
modifying the mount hash or associated fields, and may be taken for read when
performing mount hash lookups.

A new lock is added for the mnt-id allocator, so it doesn't need to take
the heavy vfsmount write-lock.

The number of atomics should remain the same for fastpath rlock cases, though
code would be slightly slower due to per-cpu access. Scalability is not not be
much improved in common cases yet, due to other locks (ie. dcache_lock) getting
in the way. However path lookups crossing mountpoints should be one case where
scalability is improved (currently requiring the global lock).

The slowpath is slower due to use of brlock. On a 64 core, 64 socket, 32 node
Altix system (high latency to remote nodes), a simple umount microbenchmark
(mount --bind mnt mnt2 ; umount mnt2 loop 1000 times), before this patch it
took 6.8s, afterwards took 7.1s, about 5% slower.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

fs: remove extra lookup in __lookup_hash

Optimize lookup for create operations, where no dentry should often be
common-case. In cases where it is not, such as unlink, the added overhead
is much smaller than the removed.

Also, move comments about __d_lookup racyness to the __d_lookup call site.
d_lookup is intuitive; __d_lookup is what needs commenting. So in that same
vein, add kerneldoc comments to __d_lookup and clean up some of the comments:

- We are interested in how the RCU lookup works here, particularly with
  renames. Make that explicit, and point to the document where it is explained
  in more detail.
- RCU is pretty standard now, and macros make implementations pretty mindless.
  If we want to know about RCU barrier details, we look in RCU code.
- Delete some boring legacy comments because we don't care much about how the
  code used to work, more about the interesting parts of how it works now. So
  comments about lazy LRU may be interesting, but would better be done in the
  LRU or refcount management code.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Fix parameter name in kernel-doc notation (causes a warning).
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Prepend "(unreachable)" to path strings if the path is not reachable
from the current root.

Two places updated are
 - the return string from getcwd()
 - and symlinks under /proc/$PID.

Other uses of d_path() are left unchanged (we know that some old
software crashes if /proc/mounts is changed).
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

__d_path() has 4 callers:

  d_path()
  sys_getcwd()
  seq_path_root()
  tomoyo_realpath_from_path2()

Of these the only one which needs the " (deleted)" ending is d_path().

sys_getcwd() checks for existence before calling __d_path().

seq_path_root() is used to show the mountpoint path in
/proc/PID/mountinfo, which is always a positive.

And tomoyo doesn't want the deleted ending.

Create a helper "path_with_deleted()" as subsequent patches will need
this in multiple places.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>