- 08 11月, 2011 1 次提交
-
-
由 Namjae Jeon 提交于
blk_finish_plug is needed in error case of writepages. Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 02 11月, 2011 1 次提交
-
-
由 Miklos Szeredi 提交于
Replace remaining direct i_nlink updates with a new set_nlink() updater function. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 01 11月, 2011 5 次提交
-
-
由 Mel Gorman 提交于
Direct reclaim should never writeback pages. Warn if an attempt is made. Signed-off-by: NMel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Alex Elder <aelder@sgi.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <chris.mason@oracle.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yongqiang Yang 提交于
As comment says, we should handle unaligned range rather than aligned one. This fixes a bug found by running xfstests #91. Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com>
-
由 Yongqiang Yang 提交于
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Yongqiang Yang 提交于
Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Tao Ma 提交于
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten should be done simultaneously since ext4_end_io_nolock always clear the flag and decrease the counter in the same time. We have found some bugs that the flag is set while leaving i_aiodio_unwritten unchanged(commit 32c80b32). So this patch just tries to create a helper function to wrap them to avoid any future bug. The idea is inspired by Eric. Cc: Eric Sandeen <sandeen@redhat.com> Signed-off-by: NTao Ma <boyu.mt@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 26 10月, 2011 1 次提交
-
-
由 Yongqiang Yang 提交于
The started journal handle should be stopped in failure case. Signed-off-by: NYongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Acked-by: NJan Kara <jack@suse.cz> Cc: stable@kernel.org
-
- 25 10月, 2011 1 次提交
-
-
由 Dmitry Monakhov 提交于
EOFBLOCK_FL should be updated if called w/o FALLOCATE_FL_KEEP_SIZE Currently it happens only if new extent was allocated. TESTCASE: fallocate test_file -n -l4096 fallocate test_file -l4096 Last fallocate cmd has updated size, but keept EOFBLOCK_FL set. And fsck will complain about that. Also remove ping pong in ext4_fallocate() in case of new extents, where ext4_ext_map_blocks() clear EOFBLOCKS bit, and later ext4_falloc_update_inode() restore it again. Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 21 10月, 2011 2 次提交
-
-
由 Kazuya Mio 提交于
If ext4_jbd2_file_inode() in mpage_da_map_and_submit() fails due to journal abort, this function returns to caller without unlocking the page. It leads to the deadlock, and the patch fixes this issue by calling mpage_da_submit_io(). Signed-off-by: NKazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Akira Fujita 提交于
If ext4_jbd2_file_inode() in ext4_ordered_write_end() fails for some reasons, this function returns to caller without unlocking the page. It leads to the deadlock, and the patch fixes this issue. Signed-off-by: NAkira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 18 10月, 2011 1 次提交
-
-
由 Shaohua Li 提交于
Add block plug for ext4 .writepages. Though ext4 .writepages already handles request merge very well, block plug is still helpful to reduce block lock contention. Signed-off-by: NShaohua Li <shaohua.li@intel.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 09 10月, 2011 1 次提交
-
-
由 Tao Ma 提交于
The comment describing what ext4_ext_search_right() does is incorrect. We return 0 in *phys when *logical is the 'largest' allocated block, not smallest. Fix a few other typos while we're at it. Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NTao Ma <boyu.mt@taobao.com>
-
- 10 9月, 2011 8 次提交
-
-
由 Aditya Kali 提交于
Currently, there exists a race between delayed allocated writes and the writeback when bigalloc feature is in use. The race was because we wanted to determine what blocks in a cluster are under delayed allocation and we were using buffer_delayed(bh) check for it. But, the writeback codepath clears this bit without any synchronization which resulted in a race and an ext4 warning similar to: EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0 reserved data blocks The race existed in two places. (1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from writeback code path. (2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where buffer_delayed(bh) is set. To fix (1), this patch introduces a new buffer_head state bit - BH_Da_Mapped. This bit is set under the protection of EXT4_I(inode)->i_data_sem when we have actually mapped the delayed allocated blocks during the writeout time. We can now reliably check for this bit inside ext4_find_delalloc_range() to determine whether the reservation for the blocks have already been claimed or not. To fix (2), it was necessary to set buffer_delay(bh) under the protection of i_data_sem. So, I extracted the very beginning of ext4_map_blocks into a new function - ext4_da_map_blocks() - and performed the required setting of bh_delay bit and the quota reservation under the protection of i_data_sem. These two fixes makes the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent, thus removing the race. Tested: I was able to reproduce the problem by running 'dd' and 'fsync' in parallel. Also, xfstests sometimes used to reproduce this race. After the fix both my test and xfstests were successful and no race (warning message) was observed. Google-Bug-Id: 4997027 Signed-off-by: NAditya Kali <adityakali@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Aditya Kali 提交于
This patch adds some tracepoints in ext4/extents.c and updates a tracepoint in ext4/inode.c. Tested: Built and ran the kernel and verified that these tracepoints work. Also ran xfstests. Signed-off-by: NAditya Kali <adityakali@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Rename the function so it is more clear what is going on. Also rename the various variables so it's clearer what's happening. Also fix a missing blocks to cluster conversion when reading the number of reserved blocks for root. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This function really claims a number of free clusters, not blocks, so rename it so it's clearer what's going on. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This function really counts the free clusters reported in the block group descriptors, so rename it to reduce confusion. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Aditya Kali 提交于
With bigalloc changes, the i_blocks value was not correctly set (it was still set to number of blocks being used, but in case of bigalloc, we want i_blocks to represent the number of clusters being used). Since the quota subsystem sets the i_blocks value, this patch fixes the quota accounting and makes sure that the i_blocks value is set correctly. Signed-off-by: NAditya Kali <adityakali@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Convert the percpu counters s_dirtyblocks_counter and s_freeblocks_counter in struct ext4_super_info to be s_dirtyclusters_counter and s_freeclusters_counter. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
At least initially if the bigalloc feature is enabled, we will not support non-extent mapped inodes, online resizing, online defrag, or the FITRIM ioctl. This simplifies the initial implementation. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 07 9月, 2011 1 次提交
-
-
由 Allison Henderson 提交于
While running extended fsx tests to verify the preceeding patches, a similar bug was also found in the write operation When ever a write operation begins or ends in a hole, or extends EOF, the partial page contained in the hole or beyond EOF needs to be zeroed out. To correct this the new ext4_discard_partial_page_buffers_no_lock routine is used to zero out the partial page, but only for buffer heads that are already unmapped. Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 06 9月, 2011 1 次提交
-
-
由 Theodore Ts'o 提交于
In delayed allocation mode, it's important to only call ext4_jbd2_file_inode when the file has been extended. This is necessary to avoid a race which first got introduced in commit 678aaf48, but which was made much more common with the introduction of the "punch hole" functionality. (Especially when dioread_nolock was enabled; when I could reliably reproduce this problem with xfstests #74.) The race is this: If while trying to writeback a delayed allocation inode, there is a need to map delalloc blocks, and we run out of space in the journal, *and* at the same time the inode is already on the committing transaction's t_inode_list (because for example while doing the punch hole operation, ext4_jbd2_file_inode() is called), then the commit operation will wait for the inode to finish all of its pending writebacks by calling filemap_fdatawait(), but since that inode has one or more pages with the PageWriteback flag set, the commit operation will wait forever, and the so the writeback of the inode can never take place, and the kjournald thread and the writeback thread end up waiting for each other --- forever. It's important at this point to recall why an inode is placed on the t_inode_list; it is to provide the data=ordered guarantees that we don't end up exposing stale data. In the case where we are truncating or punching a hole in the inode, there is no possibility that stale data could be exposed in the first place, so we don't need to put the inode on the t_inode_list! The right long-term fix is to get rid of data=ordered mode altogether, and only update the extent tree or indirect blocks after the data has been written. Until then, this change will also avoid some unnecessary waiting in the commit operation. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: Allison Henderson <achender@linux.vnet.ibm.com> Cc: Jan Kara <jack@suse.cz>
-
- 03 9月, 2011 1 次提交
-
-
由 Allison Henderson 提交于
This patch adds two new routines: ext4_discard_partial_page_buffers and ext4_discard_partial_page_buffers_no_lock. The ext4_discard_partial_page_buffers routine is a wrapper function to ext4_discard_partial_page_buffers_no_lock. The wrapper function locks the page and passes it to ext4_discard_partial_page_buffers_no_lock. Calling functions that already have the page locked can call ext4_discard_partial_page_buffers_no_lock directly. The ext4_discard_partial_page_buffers_no_lock function zeros a specified range in a page, and unmaps the corresponding buffer heads. Only block aligned regions of the page will have their buffer heads unmapped. Unblock aligned regions will be mapped if needed so that they can be updated with the partial zero out. This function is meant to be used to update a page and its buffer heads to be zeroed and unmapped when the corresponding blocks have been released or will be released. This routine is used in the following scenarios: * A hole is punched and the non page aligned regions of the head and tail of the hole need to be discarded * The file is truncated and the partial page beyond EOF needs to be discarded * The end of a hole is in the same page as EOF. After the page is flushed, the partial page beyond EOF needs to be discarded. * A write operation begins or ends inside a hole and the partial page appearing before or after the write needs to be discarded * A write operation extends EOF and the partial page beyond EOF needs to be discarded This function takes a flag EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED which is used when a write operation begins or ends in a hole. When the EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED flag is used, only buffer heads that are already unmapped will have the corresponding regions of the page zeroed. Signed-off-by: NAllison Henderson <achender@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 31 8月, 2011 2 次提交
-
-
由 Theodore Ts'o 提交于
Currently attempts to open a file with O_DIRECT in data=journal mode causes the open to fail with -EINVAL. This makes it very hard to test data=journal mode. So we will let the open succeed, but then always fall back to O_DSYNC buffered writes. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jiaying Zhang 提交于
The i_mutex lock and flush_completed_IO() added by commit 2581fdc8 in ext4_evict_inode() causes lockdep complaining about potential deadlock in several places. In most/all of these LOCKDEP complaints it looks like it's a false positive, since many of the potential circular locking cases can't take place by the time the ext4_evict_inode() is called; but since at the very least it may mask real problems, we need to address this. This change removes the flush_completed_IO() and i_mutex lock in ext4_evict_inode(). Instead, we take a different approach to resolve the software lockup that commit 2581fdc8 intends to fix. Rather than having ext4-dio-unwritten thread wait for grabing the i_mutex lock of an inode, we use mutex_trylock() instead, and simply requeue the work item if we fail to grab the inode's i_mutex lock. This should speed up work queue processing in general and also prevents the following deadlock scenario: During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 8月, 2011 2 次提交
-
-
由 Christoph Hellwig 提交于
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule, and lave REQ_META purely for marking requests as metadata in blktrace. All existing callers of REQ_META except for XFS are updated to also set REQ_PRIO for now. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NNamhyung Kim <namhyung@gmail.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Christoph Hellwig 提交于
Replace all occurnanced of the undocumented READ_META with READ | REQ_META and remove the unused WRITE_META define. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 14 8月, 2011 3 次提交
-
-
由 Theodore Ts'o 提交于
Bug discovered by Jan Kara: Finally, commit 1449032b returned back the old IO submission code but apparently it forgot to return the old handling of uninitialized buffers so we unconditionnaly call block_write_full_page() without specifying end_io function. So AFAICS we never convert unwritten extents to written in some cases. For example when I mount the fs as: mount -t ext4 -o nomblk_io_submit,dioread_nolock /dev/ubdb /mnt and do int fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC, 0600); char buf[1024]; memset(buf, 'a', sizeof(buf)); fallocate(fd, 0, 0, 16384); write(fd, buf, sizeof(buf)); I get a file full of zeros (after remounting the filesystem so that pagecache is dropped) instead of seeing the first KB contain 'a's. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Tao Ma 提交于
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten should be done simultaneously since ext4_end_io_nolock always clear the flag and decrease the counter in the same time. We don't increase i_aiodio_unwritten when setting EXT4_IO_END_UNWRITTEN so it will go nagative and causes some process to wait forever. Part of the patch came from Eric in his e-mail, but it doesn't fix the problem met by Michael actually. http://marc.info/?l=linux-ext4&m=131316851417460&w=2 Reported-and-Tested-by: Michael Tokarev<mjt@tls.msk.ru> Signed-off-by: NEric Sandeen <sandeen@redhat.com> Signed-off-by: NTao Ma <boyu.mt@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
由 Jiaying Zhang 提交于
Flush inode's i_completed_io_list before calling ext4_io_wait to prevent the following deadlock scenario: A page fault happens while some process is writing inode A. During page fault, shrink_icache_memory is called that in turn evicts another inode B. Inode B has some pending io_end work so it calls ext4_ioend_wait() that waits for inode B's i_ioend_count to become zero. However, inode B's ioend work was queued behind some of inode A's ioend work on the same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten thread on that cpu is processing inode A's ioend work, it tries to grab inode A's i_mutex lock. Since the i_mutex lock of inode A is still hold before the page fault happened, we enter a deadlock. Also moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode(). During inode deleteion, ext4_evict_inode() is called before ext4_destroy_inode() and in ext4_evict_inode(), we may call ext4_truncate() without holding i_mutex lock. As a result, there is a race between flush_completed_IO that is called from ext4_ext_truncate() and ext4_end_io_work, which may cause corruption on an io_end structure. This change moves ext4_flush_completed_IO and ext4_ioend_wait from ext4_destroy_inode() to ext4_evict_inode() to resolve the race between ext4_truncate() and ext4_end_io_work during inode deletion. Signed-off-by: NJiaying Zhang <jiayingz@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 13 8月, 2011 1 次提交
-
-
由 Curt Wohlgemuth 提交于
ext4_should_writeback_data() had an incorrect sequence of tests to determine if it should return 0 or 1: in particular, even in no-journal mode, 0 was being returned for a non-regular-file inode. This meant that, in non-journal mode, we would use ext4_journalled_aops for directories, symlinks, and other non-regular files. However, calling journalled aop callbacks when there is no valid handle, can cause problems. This would cause a kernel crash with Jan Kara's commit 2d859db3 ("ext4: fix data corruption in inodes with journalled data"), because we now dereference 'handle' in ext4_journalled_write_end(). I also added BUG_ONs to check for a valid handle in the obviously journal-only aops callbacks. I tested this running xfstests with a scratch device in these modes: - no-journal - data=ordered - data=writeback - data=journal All work fine; the data=journal run has many failures and a crash in xfstests 074, but this is no different from a vanilla kernel. Signed-off-by: NCurt Wohlgemuth <curtw@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
-
- 26 7月, 2011 1 次提交
-
-
由 Jan Kara 提交于
When journalling data for an inode (either because it is a symlink or because the filesystem is mounted in data=journal mode), ext4_evict_inode() can discard unwritten data by calling truncate_inode_pages(). This is because we don't mark the buffer / page dirty when journalling data but only add the buffer to the running transaction and thus mm does not know there are still unwritten data. Fix the problem by carefully tracking transaction containing inode's data, committing this transaction, and writing uncheckpointed buffers when inode should be reaped. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 21 7月, 2011 4 次提交
-
-
由 Christoph Hellwig 提交于
For filesystems that delay their end_io processing we should keep our i_dio_count until the the processing is done. Enable this by moving the inode_dio_done call to the end_io handler if one exist. Note that the actual move to the workqueue for ext4 and XFS is not done in this patch yet, but left to the filesystem maintainers. At least for XFS it's not needed yet either as XFS has an internal equivalent to i_dio_count. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Simple filesystems always pass inode->i_sb_bdev as the block device argument, and never need a end_io handler. Let's simply things for them and for my grepping activity by dropping these arguments. The only thing not falling into that scheme is ext4, which passes and end_io handler without needing special flags (yet), but given how messy the direct I/O code there is use of __blockdev_direct_IO in one instead of two out of three cases isn't going to make a large difference anyway. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Let filesystems handle waiting for direct I/O requests themselves instead of doing it beforehand. This means filesystem-specific locks to prevent new dio referenes from appearing can be held. This is important to allow generalizing i_dio_count to non-DIO_LOCKING filesystems. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Jan Kara 提交于
Rewrite ext4_page_mkwrite() to use __block_page_mkwrite() helper. This removes the need of using i_alloc_sem to avoid races with truncate which seems to be the wrong locking order according to lock ordering documented in mm/rmap.c. Also calling ext4_da_write_begin() as used by the old code seems to be problematic because we can decide to flush delay-allocated blocks which will acquire s_umount semaphore - again creating unpleasant lock dependency if not directly a deadlock. Also add a check for frozen filesystem so that we don't busyloop in page fault when the filesystem is frozen. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 6月, 2011 3 次提交
-
-
由 Amir Goldstein 提交于
This patch moves functions from inode.c to indirect.c. The moved functions are ext4_ind_* functions and their helpers. Functions called from inode.c are declared extern. Signed-off-by: NAmir Goldstein <amir73il@users.sf.net> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Move two functions that will be needed by the indirect functions to be moved to indirect.c as well as inode.c to truncate.h as inline functions, so that we can avoid having duplicate copies of the function (which can be a maintenance problem) without having to expose them as globally functions. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
In preparation for moving the indirect functions to a separate file, move __ext4_check_blockref() to block_validity.c and rename it to ext4_check_blockref() which is exported as globally visible function. Also, rename the cpp macro ext4_check_inode_blockref() to ext4_ind_check_inode(), to make it clear that it is only valid for use with non-extent mapped inodes. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-