This patch adds support for making one power domain a sub-domain of
other domain. This is useful for modeling power dependences for devices
like TV Mixer or Camera ISP, which needs to have more than one power
domain enabled to be operational.

Based on previous work by Amit Daniel Kachhap <amit.daniel@samsung.com>.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

This patch replaces all custom samsung,power-domain dt
properties with generic power domain bindings and updates
documentation Samsung's devices referring to old binding.
Suggested-by: NKevin Hilman <khilman@kernel.org>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
[javier.martinez@collabora.co.uk: tested on the Exynos5800 Peach Pi Chromebook]
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

This patch moves Exynos PM domain code to use the new generic PM domain
look-up framework introduced in previous patches, thus also allowing
the new code to be compiled with CONFIG_ARCH_EXYNOS.

This patch was originally submitted by Tomasz Figa when he was employed
by Samsung.

Link: http://marc.info/?l=linux-pm&m=139955336002083&w=2Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Reviewed-by: NKevin Hilman <khilman@linaro.org>
Reviewed-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

While powering on/off a local powerdomain in exynos5 chipsets, the
input clocks to each device gets modified. This behaviour is based
on the SYSCLK_SYS_PWR_REG registers.
E.g. SYSCLK_MFC_SYS_PWR_REG = 0x0, the parent of input clock to MFC
                             (aclk333) gets modified to oscclk
                            = 0x1, no change in clocks.
The recommended value of SYSCLK_SYS_PWR_REG before power gating any
domain is 0x0. So we must also restore the clocks while powering on
a domain everytime.

This patch adds the framework for getting the required mux and parent
clocks through a power domain device node. With this patch, while
powering off a domain, parent is set to oscclk and while powering back
on, its re-set to the correct parent which is as per the recommended
pd on/off sequence.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NAndrew Bresticker <abrestic@chromium.org>
Signed-off-by: NArun Kumar K <arun.kk@samsung.com>
Signed-off-by: NShaik Ameer Basha <shaik.ameer@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add SRAM binding documentation.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
[kgene.kim@samsung.com: changed name SRAM to SYSRAM]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds a way to specify bindings between devices and power
domains using device tree.

A device can be bound to particular power domain by adding a
power-domain property containing a phandle to the domain. The device
will be bound to the domain before binding a driver to it and unbound
after unbinding a driver from it.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Initial state of power domains might vary on different boards and with
different bootloaders.

This patch adds detection of initial state of power domains when being
registered from DT.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for generic power domain for Exynos4 platforms and remove the
Samsung specific power domain control for Exynos4.

The generic power domain infrastructure is used to control the power domains
available on Exynos4. For non-dt platforms, the power domains are statically
instantiated. For dt platforms, the power domain nodes found in the device
tree are instantiated.

Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>