The ohci-s3c2410.c glue supports both CONFIG_ARCH_S3C2410 and
CONFIG_ARCH_S3C64XX so add it to the build of ohci-s3c2410.c
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Just noticed this during a grep, figured I might as well send it in.

From: D.J. Capelis <dev@capelis.dj>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix this sparse warning:
 drivers/usb/host/oxu210hp-hcd.c:2687:42: warning: Using plain integer as NULL pointer
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The USB bus clock is usb-bus-host, so print the correct name in the
dev_err() statement if we cannot find it.
Signed-off-by: NBen Dooks <ben@simtec.co.uk>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>

Remove the include of <mach/hardware.h>, as no definitions
from it are used by the OHCI driver.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Lots of users are getting confused about the cp2101 driver.  It really
does support more than just the cp2101 device, so rename it to cp210x to
try to prevent confusion.

Cc: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch lowers the logging priority of certain messages to prevent
users from flooding the log files.
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the extended range of baud rates supported
by CP2102 and CP2103 devices described in SiLabs AN205.  An additional
function cp2101_quantise_baudrate rounds the baud rate as per AN205
Table 1.  A modification to the baud rate calculation removes a rounding
error, allowing the full range of baud rates to be used.
Signed-off-by: NCraig Shelley <craig@microtron.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use kzfree() instead of memset() + kfree().
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1223) removes a bunch of unnecessary "inline"
annotations from the usbfs driver.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1221) changes the way usbcore reinitializes a device
following a reset or a reset-resume.  Currently we call
usb_set_interface() for every interface in the active configuration;
this is to put the interface into the same altsetting as before the
reset and to make sure that the host's endpoint state matches the
device's endpoint state.

However, sending a Set-Interface request is a waste of time if an
interface was already in altsetting 0 before the reset, since it is
certainly in altsetting 0 afterward.  In addition, many devices can't
handle Set-Interface requests -- they crash when they receive them.

So instead, the patch adds code to check each interface.  If the
interface wasn't in altsetting 0 before the reset, we go head with the
Set-Interface request as before.  But if it was then we skip sending
the Set-Interface request, and we clear out the host-side endpoint
state by calling usb_disable_interface() followed by
usb_enable_interface().

The patch also adds a couple of new comments to explain what's going
on.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These devices are better controlled with the LGPL userspace library
found at:
	http://www.phidgets.com/downloads.php?os_id=3
and full documentation at:
	http://www.phidgets.com/documentation/web/cdoc/index.html

Cc: Chester Fitchett <fitchett@phidgets.com>
Acked-by: NSean Young <sean@mess.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

actual_length should also be a u32 and not a signed value.  This patch
changes this field to be 'u32' to prevent any potential negative
conversion and comparison errors.

This triggered a few compiler warning messages when these fields were
being used with the min macro, so they have also been fixed up in this
patch.

Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Roel Kluin pointed out that transfer_buffer_lengths in struct urb was
declared as an 'int'.  This patch changes this field to be 'u32' to
prevent any potential negative conversion and comparison errors.

This triggered a few compiler warning messages when these fields were
being used with the min macro, so they have also been fixed up in this
patch.

Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The code in uhci-q.c doesn't have to use pseudo-negative values.  I did
it that way because it was easy and because it would give the expected
output during debugging.  But it doesn't have to work that way.  Here's
another approach.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1
when the USB cable is unplugged to reduce power consumption.
Added a depencency from twl4030 usb driver to TWL_REGULATOR.
Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: NKalle Jokiniemi <kalle.jokiniemi@digia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds an extension to the binary API so it reaches parity with
existing text API (so-called "1u"). The extension delivers additional data,
such as ISO descriptors and the interrupt interval.
Signed-Off-By: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes the following bug:
	.plug ch341 usb serial port into a hub port;
	.ch341 driver bound to the device and /dev/ttyUSB0 comes
	.open /dev/ttyUSB0 by minicom and we can use the serial successfully
	.suspend the ch341 usb serial device(such as: echo suspend > power/level)
	.resume the ch341 usb serial device (such as: echo on > power/level)
	.new port /dev/ttyUSB1 comes ,and the original /dev/ttyUSB0 still exists,
but is no longer usable by minicom

The patch adds suspend and resume callback to ch341 usb driver to prevent it
from unbinding during suspend. The /dev/ttyUSB0 is not released until being
closed, so /dev/ttyUSB1 comes after resume, and the original /dev/ttyUSB0 is
no longer usable by minicom. It is really a mess for a minicom user.

This patch also adds the reset_resume callback to make it usable after resuming
from STR or hibernation, for generally STR or hibernation will make the vbus
of root-hub lost.

Finally enable the driver's supports_autosuspend, for the device is in working
order with it.
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Partial support for DaVinci DM355, on the EVM board; peripheral
mode should work, once mainline merges DM355 support.  Missing:

  (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM,
      when DAVINCI_N_GPIO increases;

  (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is
      driven according to the ID signal, if cpu_is_..._dm355()

The new PHY control bits are ignored on DM6446.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Except on DaVinci, VBUS is now switched off as part of idling the
USB link (after a_wait_bcon) whenever a device is disconnected
from host.  This is correct for OTG hosts, where either SRP or
an ID interrupt could turn VBUS on again.

However, for non-OTG hosts there's no way to turn VBUS on again,
so the host becomes unusable.  And the procfs entry which once
allowed a manual workaround for this is now gone.

This patch adds an is_otg_enabled() check before scheduling the
switch-off timer in disconnect path, supporting a "classic host"
mode where SRP is unavailable.

[ dbrownell@users.sourceforge.net: tweak patch description ]
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Correct musb_read_fifosize() and musb_configure_ep0() functions
for the #ifndef BLACKFIN branch when the silicon uses static FIFO
configuration.  (Most current silicon configures this controller
to use dynamic FIFO configuration; some parts from ST don't, like
the STM STA2062.)
Signed-off-by: NGiuseppe	GORGOGLIONE <giuseppe.gorgoglione@st.com>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes endpoint starvation issue when more than one bulk QH is
multiplexed on the reserved bulk RX endpoint, which is normal
for cases like serial and ethernet adapters.

This patch sets the NAK timeout interval for such QHs, and when
a timeout triggers the next QH will be scheduled.  (This resembles
the bulk scheduling done in hardware by EHCI, OHCI, and UHCI.)

This scheme doesn't work for devices which are connected to a
high to full speed tree (transaction translator) as there is
no NAK timeout interrupt from the musb controller from such
devices.

Tested with PIO, Inventra DMA, CPPI DMA.

[ dbrownell@users.sourceforge.net:  fold in start_urb() update;
  clarify only for bulk RX; don't accidentally clear WZC bits ]
Signed-off-by: NAjay Kumar Gupta <ajay.gupta@ti.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current MUSB host code doesn't make use of all the available
FIFOs in for periodic transfers since it wrongly assumes the RX
and TX sides of any given hw_ep always share one FIFO.

Change:  use 'in_qh' and 'out_qh' fields of the 'struct musb_hw_ep'
to check the endpoint's business; get rid of the now-unused 'periodic'
array in the 'struct musb'.  Also optimize a loop induction variable
in the endpoint lookup code.

(Based on a previous patch from Ajay Kumar Gupta <ajay.gupta@ti.com>)

[ dbrownell@users.sourceforge.net: clarify description and origin
  of this fix; whitespace ]
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Avoid the following INFO from lock debugging:

[  369.126112] =================================
[  369.132063] [ INFO: inconsistent lock state ]
[  369.136457] 2.6.28-maemo1 #1
[  369.139387] ---------------------------------
[  369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage.
[  369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
[  369.154890]  (&cdev->lock){+-..}, at: [<bf1979f0>] composite_disconnect+0x1c/0]
[  369.163404] {hardirq-on-W} state was registered at:
[  369.168348]   [<c00788a8>] __lock_acquire+0x5d0/0x7d8
[  369.173506]   [<c0078b14>] lock_acquire+0x64/0x78
[  369.178266]   [<c0263a34>] _spin_lock+0x4c/0x80
[  369.182905]   [<bf19597c>] usb_function_deactivate+0x20/0x70 [g_nokia]
[  369.189527]   [<bf1a0a88>] 0xbf1a0a88
[  369.193281]   [<bf19f450>] 0xbf19f450
[  369.197004]   [<bf19fa3c>] 0xbf19fa3c
[  369.200758]   [<bf1a03a0>] 0xbf1a03a0
[  369.204481]   [<bf19f254>] 0xbf19f254
[  369.208204]   [<bf1a0158>] 0xbf1a0158
[  369.211927]   [<bf1a130c>] 0xbf1a130c
[  369.215650]   [<c01c21f0>] usb_gadget_register_driver+0x12c/0x28c
[  369.221846]   [<bf1a06bc>] 0xbf1a06bc
[  369.225569]   [<bf1a06e8>] 0xbf1a06e8
[  369.229322]   [<c002c2dc>] __exception_text_end+0x64/0x19c
[  369.234877]   [<c0081628>] sys_init_module+0x9c/0x194
[  369.240004]   [<c002c8e0>] ret_fast_syscall+0x0/0x2c
[  369.245039]   [<ffffffff>] 0xffffffff
[  369.248793] irq event stamp: 218356
[  369.252302] hardirqs last  enabled at (218355): [<c003a77c>] omap3_enter_idle+8
[  369.260420] hardirqs last disabled at (218356): [<c0264774>] __irq_svc+0x34/0x0
[  369.267927] softirqs last  enabled at (218348): [<c00585a4>] __do_softirq+0x134
[  369.275892] softirqs last disabled at (218335): [<c005899c>] irq_exit+0x60/0xb0
[  369.283308]
[  369.283308] other info that might help us debug this:
[  369.289930] no locks held by swapper/0.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

To permit a userspace application to associate with WUSB devices
using numeric association, control transfers to unauthenticated WUSB
devices must be allowed.

This requires that wusbcore correctly sets the device state to
UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be
performed to UNAUTHENTICATED devices.
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them
from loading. Needs to be applied after Alan Stern's usb-storage
subdriver separation patchset. Also added missing MODULE_DESCRIPTION and
MODULE_AUTHOR entries.
Signed-off-by: NMaciej Grela <maciej.grela@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1217) converts usb-storage's onetouch subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1216) converts usb-storage's karma subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1215) converts usb-storage's alauda subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1214) converts usb-storage's jumpshot subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1213) converts usb-storage's datafab subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1212) converts usb-storage's freecom subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1211) converts usb-storage's shuttle_usbat subdriver
into a separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1210) converts usb-storage's cypress_atacb subdriver
into a separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1209) converts usb-storage's sddr55 subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1208) converts usb-storage's isd200 subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1207) converts usb-storage's sddr09 subdriver into a
separate module.

An unexpected complication arises because of DPCM devices, in which
one LUN uses the sddr09 transport and one uses the standard CB
transport.  Since these devices can be used even when
USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h
require special treatment.  If SDDR09 isn't configured then the
entries remain in unusual_devs.h; if it is then the entries are
present in unusual_sddr09.h instead.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1206) is the first step in converting usb-storage's
subdrivers into separate modules.  It makes the following large-scale
changes:

	Remove a bunch of unnecessary #ifdef's from usb_usual.h.
	Not truly necessary, but it does clean things up.

	Move the USB device-ID table (which is duplicated between
	libusual and usb-storage) into its own source file,
	usual-tables.c, and arrange for this to be linked with
	either libusual or usb-storage according to whether
	USB_LIBUSUAL is configured.

	Add to usual-tables.c a new usb_usual_ignore_device()
	function to detect whether a particular device needs to be
	managed by a subdriver and not by the standard handlers
	in usb-storage.

	Export a whole bunch of functions in usb-storage, renaming
	some of them because their names don't already begin with
	"usb_stor_".  These functions will be needed by the new
	subdriver modules.

	Split usb-storage's probe routine into two functions.
	The subdrivers will call the probe1 routine, then fill in
	their transport and protocol settings, and then call the
	probe2 routine.

	Take the default cases and error checking out of
	get_transport() and get_protocol(), which run during
	probe1, and instead put a check for invalid transport
	or protocol values into the probe2 function.

	Add a new probe routine to be used for standard devices,
	i.e., those that don't need a subdriver.  This new routine
	checks whether the device should be ignored (because it
	should be handled by ub or by a subdriver), and if not,
	calls the probe1 and probe2 functions.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With "nousb" cmdline booting, built-in serial drivers (ie. airecable)
will trigger kernel oops.

Indeed, if nousb, usb_serial_init will failed, and the usb serial bus type
will not be registerd, then usb_serial_register call driver_register
which try to register the driver to a not registered bus.

Here add usb_disabled() check in usb_serial_register to fix it.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix ehci printk formats:

drivers/usb/host/ehci-q.c:351: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
drivers/usb/host/ehci-q.c:351: warning: format '%d' expects type 'int', but argument 5 has type 'size_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>