The opt of emulate_grp1a() is also removed.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove inline at this chance.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In addition, one comma at the end of a statement is replaced with a
semicolon.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This way, we can avoid checking the user space address many times when
we read the guest memory.

Although we can do the same for write if we check which slots are
writable, we do not care write now: reading the guest memory happens
more often than writing.

[avi: change VERIFY_READ to VERIFY_WRITE]
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

When we optimized walk_addr_generic() by not using the generic guest
memory reader, we replaced copy_from_user() with get_user():

  commit e30d2a170506830d5eef5e9d7990c5aedf1b0a51
  KVM: MMU: Optimize guest page table walk

  commit 15e2ac9a43d4d7d08088e404fddf2533a8e7d52e
  KVM: MMU: Fix 64-bit paging breakage on x86_32

But as Andi pointed out later, copy_from_user() does the same as
get_user() as long as we give a constant size to it.

So we use copy_from_user() to clean up the code.

The only, noticeable, regression introduced by this is 64-bit gpte
reading on x86_32 hosts needed for PAE guests.

But this can be mitigated by implementing 8-byte get_user() for x86_32,
if needed.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Linux doesn't use USPRG0 (now renamed VRSAVE in the architecture, even
when Altivec isn't involved), but a guest might.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Convert to microseconds when displaying
(with fix from Bharat Bhushan <Bharat.Bhushan@freescale.com>).

This reduces rounding error with large quantities of short exits.
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The exit type setting for mfspr/mtspr is moved from 44x to toplevel SPR
emulation.  This enables it on e500, and makes sure that all SPRs
are covered.

Exit accounting for tlbwe and tlbsx is added to e500.
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Return the actual host SVR for now, as we already do for PVR.  Eventually
we may support Qemu overriding PVR/SVR if the situation is appropriate,
once we implement KVM_SET_SREGS on e500.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Since the emulator now checks segment limits and access rights, it
generates a lot more accesses to the vmcs segment fields.  Undo some
of the performance hit by cacheing those fields in a read-only cache
(the entire cache is invalidated on any write, or on guest exit).
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of separate accessors for the segment selector and cached descriptor,
use one accessor for both.  This simplifies the code somewhat.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Avoids a VMREAD.
Signed-off-by: NAvi Kivity <avi@redhat.com>

dump_vmcb isn't used outside this module, make it static.
Shrink text and object by ~1% by standardizing formats.

$ size arch/x86/kvm/svm.o*
   text	   data	    bss	    dec	    hex	filename
  52910	    580	  10072	  63562	   f84a	arch/x86/kvm/svm.o.new
  53563	    580	  10072	  64215	   fad7	arch/x86/kvm/svm.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fix regression introduced by
  commit e30d2a170506830d5eef5e9d7990c5aedf1b0a51
  KVM: MMU: Optimize guest page table walk

On x86_32, get_user() does not support 64-bit values and we fail to
build KVM at the point of 64-bit paging.

This patch fixes this by using get_user() twice for that condition.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Reported-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch fixes some sparse warning about "dubious one-bit signed bitfield."
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Originally-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NJan Blunck <jblunck@suse.de>
Acked-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The CPUIDs for Centaur are added, and then the features of
PadLock hardware engine on VIA CPU, such as "ace", "ace_en"
and so on, can be passed into the kvm guest.
Signed-off-by: NBrilly Wu <brillywu@viatech.com.cn>
Signed-off-by: NKary Jin <karyjin@viatech.com.cn>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

mmio_index should be taken into account when copying data from
userspace.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Remove unused variable mmio_fault_cr2.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Move all groups into a single field and handle them in a single place.  This
saves bits when we add more group types (3 bits -> 7 groups types).
Signed-off-by: NAvi Kivity <avi@redhat.com>

walk_addr_generic() is a hot path and is also hard for the cpu to predict -
some of the parameters (fetch_fault in particular) vary wildly from
invocation to invocation.

Add unlikely() annotations where appropriate; all walk failures are
considered unlikely, as are cases where we have to mark the accessed or
dirty bit, as they are slow paths both in kvm and on real processors.
Signed-off-by: NAvi Kivity <avi@redhat.com>

For this, em_pushf/popf() are introduced.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

For this, emulate_pusha/popa() are converted to em_pusha/popa().
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In addition, the RET emulation is changed to call em_pop() to remove
the pop_instruction label.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The following instructions are changed to use opcode::execute.

Group 1 (80-83)
  ADD (00-05), OR (08-0D), ADC (10-15), SBB (18-1D), AND (20-25),
  SUB (28-2D), XOR (30-35), CMP (38-3D)

CMPS (A6-A7), SCAS (AE-AF)

The last two do the same as CMP in the emulator, so em_cmp() is used.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch optimizes the guest page table walk by using get_user()
instead of copy_from_user().

With this patch applied, paging64_walk_addr_generic() has become
about 0.5us to 1.0us faster on my Phenom II machine with NPT on.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

By reserving 0 as an invalid x86_intercept_stage, we no longer
need to store a valid flag in x86_intercept_map.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

While it isn't defined, no need to force a #UD.  If it becomes defined
in the future this can cause wierd problems for the guest.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>

arch/x86/kvm/emulate.c:2598: warning: integer constant is too large for 'long' type
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Commit 0b56652e33c72092956c651ab6ceb9f0ad081153 fails to build:

  CC [M]  arch/x86/kvm/emulate.o
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn':
arch/x86/kvm/emulate.c:4095:25: error: macro "wbinvd" passed 1 arguments, but takes just 0
arch/x86/kvm/emulate.c:4095:3: warning: statement with no effect
make[2]: *** [arch/x86/kvm/emulate.o] Error 1
make[1]: *** [arch/x86/kvm] Error 2
make: *** [arch/x86] Error 2

Work around this for now.
Signed-off-by: NClemens Noss <cnoss@gmx.de>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Function ioapic_debug() in the ioapic_deliver() misnames
one filed by reference. This patch correct it.
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch makes the cmpxchg_gpte() function aware of the
difference between l1-gfns and l2-gfns when nested
virtualization is in use.  This fixes a potential
data-corruption problem in the l1-guest and makes the code
work correct (at least as correct as the hardware which is
emulated in this code) again.

Cc: stable@kernel.org
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

No longer used.
Signed-off-by: NAvi Kivity <avi@redhat.com>

We can use container_of() instead.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Instead of calling kvm_emulate_wbinvd() directly.
Signed-off-by: NAvi Kivity <avi@redhat.com>