- 05 8月, 2010 30 次提交
-
-
由 David Howells 提交于
RxRPC can potentially deadlock as rxrpc_resend_time_expired() wants to get call->state_lock so that it can alter the state of an RxRPC call. However, its caller (call_timer_fn()) has an apparent lock on the timer struct. The problem is that rxrpc_resend_time_expired() isn't permitted to lock call->state_lock as this could cause a deadlock against rxrpc_send_abort() as that takes state_lock and then attempts to delete the resend timer by calling del_timer_sync(). The deadlock can occur because del_timer_sync() will sit there forever waiting for rxrpc_resend_time_expired() to return, but the latter may then wait for call->state_lock, which rxrpc_send_abort() holds around del_timer_sync()... This leads to a warning appearing in the kernel log that looks something like the attached. It should be sufficient to simply dispense with the locks. It doesn't matter if we set the resend timer expired event bit and queue the event processor whilst we're changing state to one where the resend timer is irrelevant as the event can just be ignored by the processor thereafter. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.35-rc3-cachefs+ #115 ------------------------------------------------------- swapper/0 is trying to acquire lock: (&call->state_lock){++--..}, at: [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] but task is already holding lock: (&call->resend_timer){+.-...}, at: [<ffffffff8103b675>] run_timer_softirq+0x182/0x2a5 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&call->resend_timer){+.-...}: [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa [<ffffffff81056184>] lock_acquire+0x57/0x6d [<ffffffff8103bb9c>] del_timer_sync+0x3c/0x86 [<ffffffffa002bb7a>] rxrpc_send_abort+0x50/0x97 [af_rxrpc] [<ffffffffa002bdd9>] rxrpc_kernel_abort_call+0xa1/0xdd [af_rxrpc] [<ffffffffa0061588>] afs_deliver_to_call+0x129/0x368 [kafs] [<ffffffffa006181b>] afs_process_async_call+0x54/0xff [kafs] [<ffffffff8104261d>] worker_thread+0x1ef/0x2e2 [<ffffffff81045f47>] kthread+0x7a/0x82 [<ffffffff81002cd4>] kernel_thread_helper+0x4/0x10 -> #0 (&call->state_lock){++--..}: [<ffffffff81055237>] validate_chain+0x727/0xd23 [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa [<ffffffff81056184>] lock_acquire+0x57/0x6d [<ffffffff813e6b69>] _raw_read_lock_bh+0x34/0x43 [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffff8103b6e6>] run_timer_softirq+0x1f3/0x2a5 [<ffffffff81036828>] __do_softirq+0xa2/0x13e [<ffffffff81002dcc>] call_softirq+0x1c/0x28 [<ffffffff810049f0>] do_softirq+0x38/0x80 [<ffffffff810361a2>] irq_exit+0x45/0x47 [<ffffffff81018fb3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff81002893>] apic_timer_interrupt+0x13/0x20 [<ffffffff810011ac>] cpu_idle+0x4d/0x83 [<ffffffff813e06f3>] start_secondary+0x1bd/0x1c1 other info that might help us debug this: 1 lock held by swapper/0: #0: (&call->resend_timer){+.-...}, at: [<ffffffff8103b675>] run_timer_softirq+0x182/0x2a5 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.35-rc3-cachefs+ #115 Call Trace: <IRQ> [<ffffffff81054414>] print_circular_bug+0xae/0xbd [<ffffffff81055237>] validate_chain+0x727/0xd23 [<ffffffff810560bc>] __lock_acquire+0x889/0x8fa [<ffffffff810539a7>] ? mark_lock+0x42f/0x51f [<ffffffff81056184>] lock_acquire+0x57/0x6d [<ffffffffa00200d4>] ? rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffff813e6b69>] _raw_read_lock_bh+0x34/0x43 [<ffffffffa00200d4>] ? rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffffa00200d4>] rxrpc_resend_time_expired+0x56/0x96 [af_rxrpc] [<ffffffff8103b6e6>] run_timer_softirq+0x1f3/0x2a5 [<ffffffff8103b675>] ? run_timer_softirq+0x182/0x2a5 [<ffffffffa002007e>] ? rxrpc_resend_time_expired+0x0/0x96 [af_rxrpc] [<ffffffff810367ef>] ? __do_softirq+0x69/0x13e [<ffffffff81036828>] __do_softirq+0xa2/0x13e [<ffffffff81002dcc>] call_softirq+0x1c/0x28 [<ffffffff810049f0>] do_softirq+0x38/0x80 [<ffffffff810361a2>] irq_exit+0x45/0x47 [<ffffffff81018fb3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff81002893>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81049de1>] ? __atomic_notifier_call_chain+0x0/0x86 [<ffffffff8100955b>] ? mwait_idle+0x6e/0x78 [<ffffffff81009552>] ? mwait_idle+0x65/0x78 [<ffffffff810011ac>] cpu_idle+0x4d/0x83 [<ffffffff813e06f3>] start_secondary+0x1bd/0x1c1 Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
The packet length should be checked before the packet data is dereferenced. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
The packet length should be checked before the packet data is dereferenced. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
The packet length should be checked before the packet data is dereferenced. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
On the TX path, skb->data points to the ethernet header, not the network header. So when validating the packet length for accessing we should take the ethernet header into account. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Weil 提交于
free_netdev finally calls kfree which makes the contents of ndev and priv (private data contained in ndev) invalid. So iounmap should be called before free_netdev. Cc: David S. Miller <davem@davemloft.net> Cc: Chaithrika U S <chaithrika@ti.com> Cc: Sriramakrishnan <srk@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kulikov Vasiliy 提交于
IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial由 Linus Torvalds 提交于
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (30 commits) Revert "HID: add support for the Wacom Intuos 4 wireless" HID: fix up Kconfig entry for ACRUX driver HID: add ACRUX game controller force feedback support HID: Force input registration for "VEC footpedal" HID: add HID_QUIRK_HIDINPUT_FORCE HID: hid-input.c: indentation fixes HID: hiddev: use usb_find_interface, get rid of BKL HID: ignore digitizer usage Undefined (0x00) HID: Add support for Conceptronic CLLRCMCE HID: hid-ids.h: Whitespace fixup, align using TABs HID: picolcd: implement refcounting of framebuffer HID: picolcd: do not reallocate memory on depth change HID: picolcd: Add minimal palette required by fbcon on 8bpp HID: magicmouse: Correct parsing of large X and Y motions. HID: magicmouse: report last touch up HID: picolcd: fix deferred_io init/cleanup to fb ordering HID: hid-ids.h: keep vendor ids in alphabetical order HID: add proper support for Elecom BM084 bluetooth mouse HID: magicmouse: enable horizontal scrolling HID: magicmouse: add param for scroll speed ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (39 commits) random: Reorder struct entropy_store to remove padding on 64bits padata: update API documentation padata: Remove padata_get_cpumask crypto: pcrypt - Update pcrypt cpumask according to the padata cpumask notifier crypto: pcrypt - Rename pcrypt_instance padata: Pass the padata cpumasks to the cpumask_change_notifier chain padata: Rearrange set_cpumask functions padata: Rename padata_alloc functions crypto: pcrypt - Dont calulate a callback cpu on empty callback cpumask padata: Check for valid cpumasks padata: Allocate cpumask dependend recources in any case padata: Fix cpu index counting crypto: geode_aes - Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) pcrypt: Added sysfs interface to pcrypt padata: Added sysfs primitives to padata subsystem padata: Make two separate cpumasks padata: update documentation padata: simplify serialization mechanism padata: make padata_do_parallel to return zero on success padata: Handle empty padata cpumasks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: allow limited allocation before slab is online percpu: make @dyn_size always mean min dyn_size in first chunk init functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits) [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions [SCSI] zfcp: Introduce experimental support for DIF/DIX [SCSI] zfcp: Enable data division support for FCP devices [SCSI] zfcp: Prevent access on uninitialized memory. [SCSI] zfcp: Post events through FC transport class [SCSI] zfcp: Cleanup QDIO attachment and improve processing. [SCSI] zfcp: Cleanup function parameters for sbal value. [SCSI] zfcp: Use correct width for timer_interval field [SCSI] zfcp: Remove SCSI device when removing unit [SCSI] zfcp: Use memdup_user and kstrdup [SCSI] zfcp: Fix retry after failed "open port" erp action [SCSI] zfcp: Fail erp after timeout [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add [SCSI] zfcp: Do not try "forced close" when port is already closed [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED [SCSI] sd: add support for runtime PM [SCSI] implement runtime Power Management [SCSI] convert to the new PM framework [SCSI] Unify SAM_ and SAM_STAT_ macros ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits) phy/marvell: add 88ec048 support igb: Program MDICNFG register prior to PHY init e1000e: correct MAC-PHY interconnect register offset for 82579 hso: Add new product ID can: Add driver for esd CAN-USB/2 device l2tp: fix export of header file for userspace can-raw: Fix skb_orphan_try handling Revert "net: remove zap_completion_queue" net: cleanup inclusion phy/marvell: add 88e1121 interface mode support u32: negative offset fix net: Fix a typo from "dev" to "ndev" igb: Use irq_synchronize per vector when using MSI-X ixgbevf: fix null pointer dereference due to filter being set for VLAN 0 e1000e: Fix irq_synchronize in MSI-X case e1000e: register pm_qos request on hardware activation ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice net: Add getsockopt support for TCP thin-streams cxgb4: update driver version cxgb4: add new PCI IDs ... Manually fix up conflicts in: - drivers/net/e1000e/netdev.c: due to pm_qos registration infrastructure changes - drivers/net/phy/marvell.c: conflict between adding 88ec048 support and cleaning up the IDs - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req conflict (registration change vs marking it static)
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6: ibft: Use IBFT_SIGN instead of open-coding the search string. ibft: convert iscsi_ibft module to iscsi boot lib ibft: separate ibft parsing from sysfs interface ibft: For UEFI machines actually do scan ACPI for iBFT. ibft: Update iBFT handling for v1.03 of the spec.
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Minor formatting fix amd64_edac: Fix operator precendence error edac, mc: Improve scrub rate handling amd64_edac: Correct scrub rate setting amd64_edac: Fix DCT base address selector amd64_edac: Remove polling mechanism x86, mce: Notify about corrected events too amd64_edac: Remove unneeded defines edac: Remove EDAC_DEBUG_VERBOSE amd64_edac: Sanitize syndrome extraction
-
由 David Howells 提交于
Commit 8f92054e ("CRED: Fix __task_cred()'s lockdep check and banner comment") fixed the lockdep checks on __task_cred(). This has shown up a place in the signalling code where a lock should be held - namely that check_kill_permission() requires its callers to hold the RCU lock. Fix group_send_sig_info() to get the RCU read lock around its call to check_kill_permission(). Without this patch, the following warning can occur: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- kernel/signal.c:660 invoked rcu_dereference_check() without protection! ... Reported-by: NTetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tejun Heo 提交于
bd_prepare_to_claim() incorrectly allowed multiple attempts for exclusive open to progress in parallel if the attempting holders are identical. This triggered BUG_ON() as reported in the following bug. https://bugzilla.kernel.org/show_bug.cgi?id=16393 __bd_abort_claiming() is used to finish claiming blocks and doesn't work if multiple openers are inside a claiming block. Allowing multiple parallel open attempts to continue doesn't gain anything as those are serialized down in the call chain anyway. Fix it by always allowing only single open attempt in a claiming block. This problem can easily be reproduced by adding a delay after bd_prepare_to_claim() and attempting to mount two partitions of a disk. stable: only applicable to v2.6.35 Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kyle McMartin 提交于
The firmware handles '\t' internally, so stop trying to emulate it (which, incidentally, had a bug in it.) Fixes a really weird hang at bootup in rcu_bootup_announce, which, as far as I can tell, is the first printk in the core kernel to use a tab as the first character. Cc: stable@kernel.org Signed-off-by: NKyle McMartin <kyle@parisc-linux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Add runtime PM statistics (v3) PM / Runtime: Make runtime_status attribute not debug-only (v. 2) PM: Do not use dynamically allocated objects in pm_wakeup_event() PM / Suspend: Fix ordering of calls in suspend error paths PM / Hibernate: Fix snapshot error code path PM / Hibernate: Fix hibernation_platform_enter() pm_qos: Get rid of the allocation in pm_qos_add_request() pm_qos: Reimplement using plists plist: Add plist_last PM: Make it possible to avoid races between wakeup and system sleep PNPACPI: Add support for remote wakeup PM: describe kernel policy regarding wakeup defaults (v. 2) PM / Hibernate: Fix typos in comments in kernel/power/swap.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Remove pointless printk from p4-clockmod. [CPUFREQ] Fix section mismatch for powernow_cpu_init in powernow-k7.c [CPUFREQ] Fix section mismatch for longhaul_cpu_init. [CPUFREQ] Fix section mismatch for longrun_cpu_init. [CPUFREQ] powernow-k8: Fix misleading variable naming [CPUFREQ] Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) [CPUFREQ] arch/x86/kernel/cpu/cpufreq: use for_each_pci_dev() [CPUFREQ] fix brace coding style issue. [CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independent [CPUFREQ] acpi-cpufreq: Fix CPU_ANY CPUFREQ_{PRE,POST}CHANGE notification [CPUFREQ] ondemand: don't synchronize sample rate unless multiple cpus present [CPUFREQ] unexport (un)lock_policy_rwsem* functions [CPUFREQ] ondemand: Refactor frequency increase code [CPUFREQ] powernow-k8: On load failure, remind the user to enable support in BIOS setup [CPUFREQ] powernow-k8: Limit Pstate transition latency check [CPUFREQ] Fix PCC driver error path [CPUFREQ] fix double freeing in error path of pcc-cpufreq [CPUFREQ] pcc driver should check for pcch method before calling _OSC [CPUFREQ] fix memory leak in cpufreq_add_dev [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)" Manually fix up non-data merge conflict introduced by new calling conventions for trace_power_start() in commit 6f4f2723 ("x86 cpufreq: Make trace_power_frequency cpufreq driver independent"), which didn't update the intel_idle native hardware cpuidle driver.
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (88 commits) ips driver: make it less chatty intel_scu_ipc: fix size field for intel_scu_ipc_command intel_scu_ipc: return -EIO for error condition in busy_loop intel_scu_ipc: fix data packing of PMIC command on Moorestown Clean up command packing on MRST. zero the stack buffer before giving random garbage to the SCU Fix stack buffer size for IPC writev messages intel_scu_ipc: Use the new cpu identification function intel_scu_ipc: tidy up unused bits Remove indirect read write api support. intel_scu_ipc: Support Medfield processors intel_scu_ipc: detect CPU type automatically x86 plat: limit x86 platform driver menu to X86 acpi ec_sys: Be more cautious about ec write access acpi ec: Fix possible double io port registration hp-wmi: acpi_drivers.h is already included through acpi.h two lines below hp-wmi: Fix mixing up of and/or directive dell-laptop: make dell_laptop_i8042_filter() static asus-laptop: fix asus_input_init error path msi-wmi: make needlessly global symbols static ...
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (198 commits) KVM: VMX: Fix host GDT.LIMIT corruption KVM: MMU: using __xchg_spte more smarter KVM: MMU: cleanup spte set and accssed/dirty tracking KVM: MMU: don't atomicly set spte if it's not present KVM: MMU: fix page dirty tracking lost while sync page KVM: MMU: fix broken page accessed tracking with ept enabled KVM: MMU: add missing reserved bits check in speculative path KVM: MMU: fix mmu notifier invalidate handler for huge spte KVM: x86 emulator: fix xchg instruction emulation KVM: x86: Call mask notifiers from pic KVM: x86: never re-execute instruction with enabled tdp KVM: Document KVM_GET_SUPPORTED_CPUID2 ioctl KVM: x86: emulator: inc/dec can have lock prefix KVM: MMU: Eliminate redundant temporaries in FNAME(fetch) KVM: MMU: Validate all gptes during fetch, not just those used for new pages KVM: MMU: Simplify spte fetch() function KVM: MMU: Add gpte_valid() helper KVM: MMU: Add validate_direct_spte() helper KVM: MMU: Add drop_large_spte() helper KVM: MMU: Use __set_spte to link shadow pages ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add() Input: cy8ctmg110 - capacitive touchscreen support Input: keyboard - also match braille-only keyboards Input: adp5588-keys - export unused GPIO pins Input: xpad - add product ID for Hori Fighting Stick EX2 Input: adxl34x - fix leak and use after free Input: samsung-keypad - Add samsung keypad driver Input: i8042 - reset keyboard controller wehen resuming from S2R Input: synaptics - set min/max for finger width Input: synaptics - only report width on hardware that supports it Input: evdev - signal that device is writable in evdev_poll() Input: mousedev - signal that device is writable in mousedev_poll() Input: change input handlers to use bool when possible Input: document the MT event slot protocol Input: introduce MT event slots Input: usbtouchscreen - implement reset_resume Input: usbtouchscreen - implement runtime power management Input: usbtouchscreen - implement basic suspend/resume Input: Add ATMEL QT602240 touchscreen driver Input: fix signedness warning in input_set_keycode() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits) V4L/DVB: sms: Convert IR support to use the Remote Controller core V4L/DVB: sms: properly initialize IR phys and IR name V4L/DVB: standardize names at rc-dib0700 tables V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5 V4L/DVB: dib0700: properly implement IR change_protocol V4L/DVB: dib0700: break keytable into NEC and RC-5 variants V4L/DVB: dib0700: avoid bad repeat V4L/DVB: Port dib0700 to rc-core V4L/DVB: Add a keymap file with dib0700 table V4L/DVB: dvb-usb: add support for rc-core mode V4L/DVB: dvb-usb: prepare drivers for using rc-core V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key V4L/DVB: rj54n1cb0c: fix a comment in the driver V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2 V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats V4L/DVB: mediabus: fix ambiguous pixel code names ...
-
由 Linus Torvalds 提交于
Merge branch 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6 * 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6: swiotlb: Make swiotlb bookkeeping functions visible in the header file. swiotlb: search and replace "int dir" with "enum dma_data_direction dir" swiotlb: Make internal bookkeeping functions have 'swiotlb_tbl' prefix. swiotlb: add the swiotlb initialization function with iotlb memory swiotlb: add swiotlb_tbl_map_single library function
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (90 commits) AppArmor: fix build warnings for non-const use of get_task_cred selinux: convert the policy type_attr_map to flex_array AppArmor: Enable configuring and building of the AppArmor security module TOMOYO: Use pathname specified by policy rather than execve() AppArmor: update path_truncate method to latest version AppArmor: core policy routines AppArmor: policy routines for loading and unpacking policy AppArmor: mediation of non file objects AppArmor: LSM interface, and security module initialization AppArmor: Enable configuring and building of the AppArmor security module AppArmor: update Maintainer and Documentation AppArmor: functions for domain transitions AppArmor: file enforcement routines AppArmor: userspace interfaces AppArmor: dfa match engine AppArmor: contexts used in attaching policy to system objects AppArmor: basic auditing infrastructure. AppArmor: misc. base functions and defines TOMOYO: Update version to 2.3.0 TOMOYO: Fix quota check. ...
-
- 04 8月, 2010 10 次提交
-
-
由 Jiri Kosina 提交于
-
由 Jiri Kosina 提交于
Conflicts: drivers/hid/hid-ids.h
-
由 Jiri Kosina 提交于
Conflicts: drivers/hid/hid-ids.h
-
由 Jiri Kosina 提交于
Conflicts: drivers/hid/hid-ids.h
-
由 Jiri Kosina 提交于
Conflicts: drivers/hid/hid-ids.h
-
由 Justin P. Mattock 提交于
Below you will find an updated version from the original series bunching all patches into one big patch updating broken web addresses that are located in Documentation/* Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult, the best way to deal with these is to use web.archive.org to locate these addresses that are outdated. Now there are also some addresses pointing to .spec files some are located, but some(after searching on the companies site)where still no where to be found. In this case I just changed the address to the company site this way the users can contact the company and they can locate them for the users. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NThomas Weber <weber@corscience.de> Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Cc: Paulo Marques <pmarques@grupopie.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Michael Neuling <mikey@neuling.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Justin P. Mattock 提交于
The patch below fixes a typo in a comment. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Stefan Weil 提交于
Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-