Mesh HWMP module will be able to rely on the HW
RC algorithm if it exists, for path metric calculations.

This allows the metric calculation mechanism to calculate
a correct metric, based on PER and last TX rate both via
HW RC algorithm if it exists or via parameters collected
by the SW.
Signed-off-by: NMaxim Altshul <maxim.altshul@ti.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The variable is added to allow the driver an easy access to
it's own hw->priv when the op is invoked.

This fixes a crash in wlcore because it was relying on a
station pointer that wasn't initialized yet. It's the wrong
way to fix the crash, but it solves the problem for now and
it does make sense to have the hw pointer here.
Signed-off-by: NMaxim Altshul <maxim.altshul@ti.com>
[rewrite commit message, fix indentation]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If QoS frame with EOSP (end of service period) subfield=1 sent by local
peer was not acked by remote peer, local peer did not end the MPSP. This
prevents local peer from going to DOZE state. And if the remote peer
goes away without closing connection, local peer continues AWAKE state
and wastes battery.
Signed-off-by: NMasashi Honma <masashi.honma@gmail.com>
Acked-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The code currently assumes that buffered multicast PS frames don't have
a pending ACK frame for tx status reporting.
However, hostapd sends a broadcast deauth frame on teardown for which tx
status is requested. This can lead to the "Have pending ack frames"
warning on module reload.
Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue.

Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some drivers (e.g. wl18xx) expect that the last stage in the
de-initialization process will be stopping the beacons, similar to AP flow.
Update ieee80211_stop_mesh() flow accordingly.
As peers can be removed dynamically, this would not impact other drivers.

Tested also on Ralink RT3572 chipset.
Signed-off-by: NMaital Hahn <maitalm@ti.com>
Signed-off-by: NYaniv Machani <yanivma@ti.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The logic was inverted here, set the bit if frames are pending.

Fixes: ba8c3d6f ("mac80211: add an intermediate software queue implementation")
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Previously, mesh power management functionality works only with kernel
MPM. Because user space MPM did not report mesh peer AID to kernel,
the kernel could not identify the bit in TIM element. So this patch
adds mesh peer AID setting API.
Signed-off-by: NMasashi Honma <masashi.honma@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Continuing the workaround implemented in commit 23665aaf
("mac80211: Interoperability workaround for 80+80 and 160 MHz channels")
use the same code to parse the Wide Bandwidth Channel Switch element
by converting to VHT Operation element since the spec also just refers
to that for parsing semantics, particularly with the workaround.

While at it, remove some dead code - the IEEE80211_STA_DISABLE_40MHZ
flag can never be set at this point since it's checked earlier and the
wide_bw_chansw_ie pointer is set to NULL if it's set.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Rather than reporting the scan as having completed, report it as
being aborted.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add the following to support beacon report radio measurement
with the measurement mode field set to passive or active:
1. Propagate the required scan duration to the device
2. Report the scan start time (in terms of TSF)
3. Report each BSS's detection time (also in terms of TSF)

TSF times refer to the BSS that the interface that requested the
scan is connected to.
Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com>
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
[changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match
the new API]
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Beacon report radio measurement requires reporting observed BSSs
on the channels specified in the beacon request. If the measurement
mode is set to passive or active, it requires actually performing a
scan (passive or active, accordingly), and reporting the time that
the scan was started and the time each beacon/probe was received
(both in terms of TSF of the BSS of the requesting AP). If the
request mode is table, this information is optional.
In addition, the radio measurement request specifies the channel
dwell time for the measurement.

In order to use scan for beacon report when the mode is active or
passive, add a parameter to scan request that specifies the
channel dwell time, and add scan start time and beacon received time
to scan results information.

Supporting beacon report is required for Multi Band Operation (MBO).
Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com>
Signed-off-by: NDavid Spinadel <david.spinadel@intel.com>
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The current implementation of handling ADDBA Request while a session
is already active with the peer is wrong - in case the peer is using
the existing session's dialog token this should be treated as update
to the session, which can update the timeout value.

We don't really have a good way of supporting that, so reject, but
implement the required behaviour in the spec of "Even if the updated
ADDBA Request frame is not accepted, the original Block ACK setup
remains active." (802.11-2012 10.5.4)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some lockdep assertions were not fulfilled and
resulted in a kernel warning/call trace if driver
used intermediate software queues (e.g. ath10k).

Existing code sequences should've guaranteed safety
but it's always good to be extra careful.

The call trace could look like this:

 [ 237.335805] ------------[ cut here ]------------
 [ 237.335852] WARNING: CPU: 3 PID: 1921 at include/net/fq_impl.h:22 fq_flow_dequeue+0xed/0x140 [mac80211]
 [ 237.335855] Modules linked in: ath10k_pci(E-) ath10k_core(E) ath(E) mac80211(E) cfg80211(E)
 [ 237.335913] CPU: 3 PID: 1921 Comm: rmmod Tainted: G        W   E   4.7.0-rc4-wt-ath+ #1377
 [ 237.335916] Hardware name: Hewlett-Packard HP ProBook 6540b/1722, BIOS 68CDD Ver. F.04 01/27/2010
 [ 237.335918]  00200286 00200286 eff85dac c14151e2 f901574e 00000000 eff85de0 c1081075
 [ 237.335928]  c1ab91f0 00000003 00000781 f901574e 00000016 f8fbabad f8fbabad 00000016
 [ 237.335938]  eb24ff60 00000000 ef3886c0 eff85df4 c10810ba 00000009 00000000 00000000
 [ 237.335948] Call Trace:
 [ 237.335953]  [<c14151e2>] dump_stack+0x76/0xb4
 [ 237.335957]  [<c1081075>] __warn+0xe5/0x100
 [ 237.336002]  [<f8fbabad>] ? fq_flow_dequeue+0xed/0x140 [mac80211]
 [ 237.336046]  [<f8fbabad>] ? fq_flow_dequeue+0xed/0x140 [mac80211]
 [ 237.336053]  [<c10810ba>] warn_slowpath_null+0x2a/0x30
 [ 237.336095]  [<f8fbabad>] fq_flow_dequeue+0xed/0x140 [mac80211]
 [ 237.336137]  [<f8fbc67a>] fq_flow_reset.constprop.56+0x2a/0x90 [mac80211]
 [ 237.336180]  [<f8fbc79a>] fq_reset.constprop.59+0x2a/0x50 [mac80211]
 [ 237.336222]  [<f8fc04e8>] ieee80211_txq_teardown_flows+0x38/0x40 [mac80211]
 [ 237.336258]  [<f8f7c1a4>] ieee80211_unregister_hw+0xe4/0x120 [mac80211]
 [ 237.336275]  [<f933f536>] ath10k_mac_unregister+0x16/0x50 [ath10k_core]
 [ 237.336292]  [<f934592d>] ath10k_core_unregister+0x3d/0x90 [ath10k_core]
 [ 237.336301]  [<f85f8836>] ath10k_pci_remove+0x36/0xa0 [ath10k_pci]
 [ 237.336307]  [<c1470388>] pci_device_remove+0x38/0xb0
 ...

Fixes: 5caa328e ("mac80211: implement codel on fair queuing flows")
Fixes: fa962b92 ("mac80211: implement fair queueing per txq")
Tested-by: NKalle Valo <kvalo@qca.qualcomm.com>
Reported-by: NKalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

We've accumulated a couple of different fixes now to mesh_sta_cleanup()
due to the different paths that user_mpm and !user_mpm cases take -- one
fix to flush nexthop paths and one to fix the counting.

The only caller of mesh_plink_deactivate() is mesh_sta_cleanup(), so we
can push the user_mpm checks down into there in order to share more
code.

In doing so, we can remove an extra call to mesh_path_flush_by_nexthop()
and the (unnecessary) call to mesh_accept_plinks_update().  This will
also ensure the powersaving state code gets called in the user_mpm case.

The only cleanup tasks we need to avoid when MPM is in user-space
are sending the peering frames and stopping the plink timer, so wrap
those in the appropriate check.
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

Previously, the action frames to group address was not encrypted. But
[1] "Table 8-38 Category values" indicates "Mesh" and "Multihop" category
action frames should be encrypted (Group addressed privacy == yes). And the
encyption key should be MGTK ([1] 10.13 Group addressed robust management frame
procedures). So this patch modifies the code to make it suitable for spec.

[1] IEEE Std 802.11-2012
Signed-off-by: NMasashi Honma <masashi.honma@gmail.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

We normally return an uninitialized value, but no one checks it so it
doesn't matter.  Anyway, let's silence the static checker warning.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

If a user space program (e.g., wpa_supplicant) deletes a STA entry that
is currently in NL80211_PLINK_ESTAB state, the number of established
plinks counter was not decremented and this could result in rejecting
new plink establishment before really hitting the real maximum plink
limit. For !user_mpm case, this decrementation is handled by
mesh_plink_deactive().

Fix this by decrementing estab_plinks on STA deletion
(mesh_sta_cleanup() gets called from there) so that the counter has a
correct value and the Beacon frame advertisement in Mesh Configuration
element shows the proper value for capability to accept additional
peers.

Cc: stable@vger.kernel.org
Signed-off-by: NJouni Malinen <j@w1.fi>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>

There is no other limit other than a global
packet count limit when using software queuing.
This means a single flow queue can grow insanely
long. This is particularly bad for TCP congestion
algorithms which requires a little more
sophisticated frame dropping scheme than a mere
headdrop on limit overflow.

Hence apply (a slighly modified, to fit the knobs)
CoDel5 on flow queues. This improves TCP
convergence and stability when combined with
wireless driver which keeps its own tx queue/fifo
at a minimum fill level for given link conditions.
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This adds a debugfs entry to read and modify some fq parameters.

This makes it easy to debug, test and experiment.
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
[remove module parameter for now]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

mac80211's software queues were designed to work
very closely with device tx queues. They are
required to make use of 802.11 packet aggregation
easily and efficiently.

Due to the way 802.11 aggregation is designed it
only makes sense to keep fair queuing as close to
hardware as possible to reduce induced latency and
inertia and provide the best flow responsiveness.

This change doesn't translate directly to
immediate and significant gains. End result
depends on driver's induced latency. Best results
can be achieved if driver keeps its own tx
queue/fifo fill level to a minimum.
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Qdiscs are designed with no regard to 802.11
aggregation requirements and hand out
packet-by-packet with no guarantee they are
destined to the same tid. This does more bad than
good no matter how fairly a given qdisc may behave
on an ethernet interface.

Software queuing used per-AC netdev subqueue
congestion control whenever a global AC limit was
hit. This meant in practice a single station or
tid queue could starve others rather easily. This
could resonate with qdiscs in a bad way or could
just end up with poor aggregation performance.
Increasing the AC limit would increase induced
latency which is also bad.

Disabling qdiscs by default and performing
taildrop instead of netdev subqueue congestion
control on the other hand makes it possible for
tid queues to fill up "in the meantime" while
preventing stations starving each other.

This increases aggregation opportunities and
should allow software queuing based drivers
achieve better performance by utilizing airtime
more efficiently with big aggregates.
Signed-off-by: NMichal Kazior <michal.kazior@tieto.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This makes it a lot easier to understand the capabilities used
by the station:

VHT supported
cap: 0x300819b2
		MAX-MPDU-11454
		80Mhz
		RXLDPC
		SHORT-GI-80
		TXSTBC
		RXSTBC_1
		SU-BEAMFORMER-CAPABLE
		SU-BEAMFORMEE-CAPABLE
		BEAMFORMEE-STS: 0x0
		SOUNDING-DIMENSIONS: 0x0
		MU-BEAMFORMER-CAPABLE
		MPDU-LENGTH-EXPONENT: 0x0
		LINK-ADAPTATION-VHT-MRQ-MFB: 0x0
		RX-ANTENNA-PATTERN
		TX-ANTENNA-PATTERN
RX MCS: fffe
TX MCS: fffe
Signed-off-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The header field is defined as u8[] but also accessed as struct
ieee80211_hdr. Enforce an alignment of 2 to prevent unnecessary
unaligned accesses, which can be very harmful for performance on many
platforms.

Fixes: e495c247 ("mac80211: extend fast-xmit for more ciphers")
Cc: stable@vger.kernel.org
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently, the mesh paths associated with a nexthop station are cleaned
up in the following code path:

    __sta_info_destroy_part1
    synchronize_net()
    __sta_info_destroy_part2
     -> cleanup_single_sta
       -> mesh_sta_cleanup
         -> mesh_plink_deactivate
           -> mesh_path_flush_by_nexthop

However, there are a couple of problems here:

1) the paths aren't flushed at all if the MPM is running in userspace
   (e.g. when using wpa_supplicant or authsae)

2) there is no synchronize_rcu between removing the path and readers
   accessing the nexthop, which means the following race is possible:

CPU0                            CPU1
~~~~                            ~~~~
                                sta_info_destroy_part1()
                                synchronize_net()
rcu_read_lock()
mesh_nexthop_resolve()
  mpath = mesh_path_lookup()
                                [...] -> mesh_path_flush_by_nexthop()
  sta = rcu_dereference(
    mpath->next_hop)
                                kfree(sta)
  access sta <-- CRASH

Fix both of these by unconditionally flushing paths before destroying
the sta, and by adding a synchronize_net() after path flush to ensure
no active readers can still dereference the sta.

Fixes this crash:

[  348.529295] BUG: unable to handle kernel paging request at 00020040
[  348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[  348.530014] *pde = 00000000
[  348.530014] Oops: 0000 [#1] PREEMPT
[  348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ]
[  348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G           O 4.6.0-rc5-wt=V1 #1
[  348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016  11/07/2014
[  348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000
[  348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0
[  348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211]
[  348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008
[  348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40
[  348.530014]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[  348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690
[  348.530014] Stack:
[  348.530014]  00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0
[  348.530014]  f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320
[  348.530014]  f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1
[  348.530014] Call Trace:
[  348.530014]  [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211]
[  348.530014]  [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211]
[  348.530014]  [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211]
[  348.530014]  [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211]
[  348.530014]  [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3
[  348.530014]  [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b
[  348.530014]  [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4]
[  348.530014]  [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat]
[  348.530014]  [<c04c6f45>] ? netif_skb_features+0x14d/0x30a
[  348.530014]  [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211]
[  348.530014]  [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[  348.530014]  [<c04c7261>] ?  validate_xmit_skb.isra.120.part.121+0x10/0x253
[  348.530014]  [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[  348.530014]  [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[  348.530014]  [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[  348.530014]  [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv]
[  348.530014]  [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv]
[  348.530014]  [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv]
[  348.530014]  [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv]
[  348.530014]  [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv]
[  348.530014]  [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv]
[  348.530014]  [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267
[  348.530014]  [<c04c7261>] ?  validate_xmit_skb.isra.120.part.121+0x10/0x253
[  348.530014]  [<c04defc6>] sch_direct_xmit+0x8b/0x1b3
[  348.530014]  [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513
[  348.530014]  [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb]
[  348.530014]  [<c04c7cfb>] dev_queue_xmit+0xa/0xc
[  348.530014]  [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge]
[  348.530014]  [<f843a35f>] br_forward_finish+0x29/0x74 [bridge]
[  348.530014]  [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge]
[  348.530014]  [<f843a714>] __br_forward+0x89/0xe7 [bridge]
[  348.530014]  [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge]
[  348.530014]  [<f843a234>] deliver_clone+0x34/0x3b [bridge]
[  348.530014]  [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[  348.530014]  [<f843a66d>] br_flood+0x77/0x95 [bridge]
[  348.530014]  [<f843a809>] br_flood_forward+0x13/0x1a [bridge]
[  348.530014]  [<f843a68b>] ? br_flood+0x95/0x95 [bridge]
[  348.530014]  [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge]
[  348.530014]  [<c04e9b2b>] ? nf_iterate+0x2b/0x6b
[  348.530014]  [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge]
[  348.530014]  [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge]
[  348.530014]  [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b
[  348.530014]  [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge]
[  348.530014]  [<c023cea4>] ? resched_curr+0x19/0x37
[  348.530014]  [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe
[  348.530014]  [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc
[  348.530014]  [<c04c4fc1>] __netif_receive_skb+0x47/0x55
[  348.530014]  [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a
[  348.530014]  [<c04c61ef>] napi_gro_receive+0x3a/0x94
[  348.530014]  [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb]
[  348.530014]  [<c0242bd8>] ? swake_up_locked+0x14/0x26
[  348.530014]  [<c04c5d29>] net_rx_action+0xde/0x250
[  348.530014]  [<c022a743>] __do_softirq+0x8a/0x163
[  348.530014]  [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19
[  348.530014]  [<c021100f>] do_softirq_own_stack+0x26/0x2c
[  348.530014]  <IRQ>
[  348.530014]  [<c022a957>] irq_exit+0x31/0x6f
[  348.530014]  [<c0210eb2>] do_IRQ+0x8d/0xa0
[  348.530014]  [<c058152c>] common_interrupt+0x2c/0x40
[  348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005
[  348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40
[  348.530014] CR2: 0000000000020040
[  348.530014] ---[ end trace 48556ac26779732e ]---
[  348.530014] Kernel panic - not syncing: Fatal exception in interrupt
[  348.530014] Kernel Offset: disabled

Cc: stable@vger.kernel.org
Reported-by: NFred Veldini <fred.veldini@gmail.com>
Tested-by: NFred Veldini <fred.veldini@gmail.com>
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When using RSS, frames might not be processed in the correct order,
and thus AP_LINK_PS must be used; most likely with firmware keeping
track of the powersave state, this is the case in iwlwifi now.

In this case, the driver can use ieee80211_sta_ps_transition() to
still have mac80211 manage powersave buffering. However, for U-APSD
and PS-Poll this isn't sufficient. If the device can't manage that
entirely on its own, mac80211's code should be used.

To allow this, export two functions: ieee80211_sta_uapsd_trigger()
and ieee80211_sta_pspoll().
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV
as is to the generated MPDUs, so the same PN appears in multiple
packets without being a replay attack.  Allow driver to explicitly
indicate that a frame is allowed to have the same PN as the previous
frame.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In some cases, after a sudden AP disappearing and reconnection to
another AP in the same ESS, user space gets the old AP in scan
results (cached). User space may decide to roam to that old AP
which will cause a disconnection and longer recovery.
Remove APs that are probably out of range from BSS table.
Signed-off-by: NDavid Spinadel <david.spinadel@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

In the case that dev_alloc_name() fails, e.g. because the name was
given by the user and already exists, we need to clean up properly
and free the per-CPU statistics. Fix that.

Cc: stable@vger.kernel.org
Fixes: 5a490510 ("mac80211: use per-CPU TX/RX statistics")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This fixes:

net/mac80211/mesh_hwmp.c:603:26: warning: ‘target_metric’ may be used uninitialized in this function

target_metric is only consumed when reply = true so no bug exists here,
but not all versions of gcc realize it.  Initialize to 0 to remove the
warning.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Prevents excessive A-MSDU aggregation at low data rates or bad
conditions.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Requires software tx queueing and fast-xmit support. For good
performance, drivers need frag_list support as well. This avoids the
need for copying data of aggregated frames. Running without it is only
supported for debugging purposes.

To avoid performance and packet size issues, the rate control module or
driver needs to limit the maximum A-MSDU size by setting
max_rc_amsdu_len in struct ieee80211_sta.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
[fix locking issue]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If the driver advertises the new HW flag USE_RSS, make the
station statistics on the fast-rx path per-CPU. This will
enable calling the RX in parallel, only hitting locking or
shared cachelines when the fast-RX path isn't available.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The regular RX path has a lot of code, but with a few
assumptions on the hardware it's possible to reduce the
amount of code significantly. Currently the assumptions
on the driver are the following:
 * hardware/driver reordering buffer (if supporting aggregation)
 * hardware/driver decryption & PN checking (if using encryption)
 * hardware/driver did de-duplication
 * hardware/driver did A-MSDU deaggregation
 * AP_LINK_PS is used (in AP mode)
 * no client powersave handling in mac80211 (in client mode)

of which some are actually checked per packet:
 * de-duplication
 * PN checking
 * decryption
and additionally packets must
 * not be A-MSDU (have been deaggregated by driver/device)
 * be data packets
 * not be fragmented
 * be unicast
 * have RFC 1042 header

Additionally dynamically we assume:
 * no encryption or CCMP/GCMP, TKIP/WEP/other not allowed
 * station must be authorized
 * 4-addr format not enabled

Some data needed for the RX path is cached in a new per-station
"fast_rx" structure, so that we only need to look at this and
the packet, no other memory when processing packets on the fast
RX path.

After doing the above per-packet checks, the data path collapses
down to a pretty simple conversion function taking advantage of
the data cached in the small fast_rx struct.

This should speed up the RX processing, and will make it easier
to reason about parallelizing RX (for which statistics will need
to be per-CPU still.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

On 32-bit platforms, the 64-bit counters we keep need to be protected
to be consistently read. Use the u64_stats_sync mechanism to do that.

In order to not end up with overly long lines, refactor the tidstats
assignments a bit.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

When storing the last_rate_* values in the RX code, there's nothing
to guarantee consistency, so a concurrent reader could see, e.g.
last_rate_idx on the new value, but last_rate_flag still on the old,
getting completely bogus values in the end.

To fix this, I lifted the sta_stats_encode_rate() function from my
old rate statistics code, which encodes the entire rate data into a
single 16-bit value, avoiding the consistency issue.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Instead of touching the rx_stats.last_rx from the status path, introduce
and use a status_stats.last_ack variable. This will make rx_stats.last_rx
indicate when the last frame was received, making it available for real
"last_rx" and statistics gathering; statistics, when done per-CPU, will
need to figure out which place was updated last for those items where the
"last" value is exposed.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

There's no need to update rx_stats.last_rx after allocating
a station since it's already updated during allocation.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Move the averaged values out of rx_stats and into rx_stats_avg,
to cleanly split them out. The averaged ones cannot be supported
for parallel RX in a per-CPU fashion, while the other values can
be collected per CPU and then combined/selected when needed.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Move the semicolon, people typically assume that and
once line already put a semicolon behind the "call".
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>