- 23 12月, 2010 2 次提交
-
-
由 Jeff Mahoney 提交于
The taskstats structure is internally aligned on 8 byte boundaries but the layout of the aggregrate reply, with two NLA headers and the pid (each 4 bytes), actually force the entire structure to be unaligned. This causes the kernel to issue unaligned access warnings on some architectures like ia64. Unfortunately, some software out there doesn't properly unroll the NLA packet and assumes that the start of the taskstats structure will always be 20 bytes from the start of the netlink payload. Aligning the start of the taskstats structure breaks this software, which we don't want. So, for now the alignment only happens on architectures that require it and those users will have to update to fixed versions of those packages. Space is reserved in the packet only when needed. This ifdef should be removed in several years e.g. 2012 once we can be confident that fixed versions are installed on most systems. We add the padding before the aggregate since the aggregate is already a defined type. Commit 85893120 ("delayacct: align to 8 byte boundary on 64-bit systems") previously addressed the alignment issues by padding out the pid field. This was supposed to be a compatible change but the circumstances described above mean that it wasn't. This patch backs out that change, since it was a hack, and introduces a new NULL attribute type to provide the padding. Padding the response with 4 bytes avoids allocating an aligned taskstats structure and copying it back. Since the structure weighs in at 328 bytes, it's too big to do it on the stack. Signed-off-by: NJeff Mahoney <jeffm@suse.com> Reported-by: NBrian Rogers <brian@xyzw.org> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Guillaume Chazarain <guichaz@gmail.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
When correlating ftrace results with /proc/vmstat, I noticed that the reporting scripts value for "pages scanned" differed significantly. Both values were "right" depending on how you look at it. The difference is due to vmstat only counting scanning of the inactive list towards pages scanned. The analysis script for the tracepoint counts active and inactive list yielding a far higher value than vmstat. The resulting scanning/reclaim ratio looks much worse. The tracepoint is ok but this patch updates the reporting script so that the report values for scanned are similar to vmstat. Signed-off-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 12月, 2010 1 次提交
-
-
由 James Bottomley 提交于
The current doc still says we call it with the host lock held, which is going to cause confusion. Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
-
- 18 12月, 2010 1 次提交
-
-
由 Bjorn Helgaas 提交于
This reverts commit e7f8567d. Acked-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 17 12月, 2010 1 次提交
-
-
由 Rafael J. Wysocki 提交于
There are some situations (e.g. in __pm_generic_call()), where pm_runtime_suspended() is used to decide whether or not to execute a device's (system) ->suspend() callback. The callback is not executed if pm_runtime_suspended() returns true, but it does so for devices that don't even support runtime PM, because the power.disable_depth device field is ignored by it. This leads to problems (i.e. devices are not suspened when they should), so rework pm_runtime_suspended() so that it returns false if the device's power.disable_depth field is different from zero. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
- 03 12月, 2010 1 次提交
-
-
由 Andrew Morton 提交于
->releasepage() does not remove the page from the mapping. Acked-by: NNeil Brown <neilb@suse.de> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 12月, 2010 2 次提交
-
-
由 Linus Torvalds 提交于
NFS needs to be able to release objects that are stored in the page cache once the page itself is no longer visible from the page cache. This patch adds a callback to the address space operations that allows filesystems to perform page cleanups once the page has been removed from the page cache. Original patch by: Linus Torvalds <torvalds@linux-foundation.org> [trondmy: cover the cases of invalidate_inode_pages2() and truncate_inode_pages()] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Yehuda Sadeh 提交于
The new interface creates directories per mapped image and under each it creates a subdir per available snapshot. This allows keeping a cleaner interface within the sysfs guidelines. The ABI documentation was updated too. Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 29 11月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
tcp_win_from_space() does the following: if (sysctl_tcp_adv_win_scale <= 0) return space >> (-sysctl_tcp_adv_win_scale); else return space - (space >> sysctl_tcp_adv_win_scale); "space" is int. As per C99 6.5.7 (3) shifting int for 32 or more bits is undefined behaviour. Indeed, if sysctl_tcp_adv_win_scale is exactly 32, space >> 32 equals space and function returns 0. Which means we busyloop in tcp_fixup_rcvbuf(). Restrict net.ipv4.tcp_adv_win_scale to [-31, 31]. Fix https://bugzilla.kernel.org/show_bug.cgi?id=20312 Steps to reproduce: echo 32 >/proc/sys/net/ipv4/tcp_adv_win_scale wget www.kernel.org [softlockup] Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2010 1 次提交
-
-
由 Raoul Bhatia 提交于
Fix trivial typos in edac.txt Signed-off-by: NRaoul Bhatia <r.bhatia@ipax.at> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
- 25 11月, 2010 3 次提交
-
-
由 Michal Hocko 提交于
Swap accounting can be configured by CONFIG_CGROUP_MEM_RES_CTLR_SWAP configuration option and then it is turned on by default. There is a boot option (noswapaccount) which can disable this feature. This makes it hard for distributors to enable the configuration option as this feature leads to a bigger memory consumption and this is a no-go for general purpose distribution kernel. On the other hand swap accounting may be very usuful for some workloads. This patch adds a new configuration option which controls the default behavior (CGROUP_MEM_RES_CTLR_SWAP_ENABLED). If the option is selected then the feature is turned on by default. It also adds a new boot parameter swapaccount[=1|0] which enhances the original noswapaccount parameter semantic by means of enable/disable logic (defaults to 1 if no value is provided to be still consistent with noswapaccount). The default behavior is unchanged (if CONFIG_CGROUP_MEM_RES_CTLR_SWAP is enabled then CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is enabled as well) Signed-off-by: NMichal Hocko <mhocko@suse.cz> Acked-by: NDaisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Corentin Chary 提交于
Asus UL30A has a 3G chip, but the radio is disabled by default. The DSDT also reference a WIMAX device, which is not present on this model. This patch adds two new files: wwan and wimax to control WWAN and WIMAX devices. It does not use rfkill, because like WLED and BLED, we don't know yet that the two ACPI functions will always control the radio, they may control only the leds on some hardware. We may add rfkill switchs later. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Chris Bagwell 提交于
Based on cpufv text from sysfs-platform-eeepc-laptop that has almost same behavior. Signed-off-by: NChris Bagwell <chris@cnpbagwell.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NCorentin Chary <corentincj@iksaif.net>
-
- 19 11月, 2010 5 次提交
-
-
由 Andres Salomon 提交于
Document things that I would've liked to have known when submitting a driver to gregkh for staging. Signed-off-by: NAndres Salomon <dilinger@queued.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
This is confusing, as we have "staging" trees for drivers/staging. Call them -next trees. Signed-off-by: NAndres Salomon <dilinger@queued.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hans J. Koch 提交于
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: NHans J. Koch <hjk@hansjkoch.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bernhard Walle 提交于
Add a bit more information how to use poll(2) on GPIO value files correctly. For me it was not clear that I need to poll(2) for POLLPRI|POLLERR or select(2) for exceptfds. Signed-off-by: NBernhard Walle <walle@corscience.de> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Carpenter 提交于
If "p" is NULL then it will cause an oops when we pass it to simple_strtoul(). In this case "p" can not be NULL so I removed the check. I also changed the check a little to make it more explicit that we are testing whether p points to the NUL char. Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 11月, 2010 1 次提交
-
-
由 Vicente Jimenez Aguilar 提交于
This is a simple update of the file Documentation/fb/00-INDEX based on the directory content. Signed-off-by: NVicente Jimenez Aguilar <googuy@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 16 11月, 2010 1 次提交
-
-
由 Jean Delvare 提交于
It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NJarod Wilson <jarod@redhat.com> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NHans Verkuil <hverkuil@xs4all.nl>
-
- 15 11月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
With the refactoring of the SH7722 clock framework some time ago this abstraction has become unecessary. Kill it off before anyone else gets the bright idea to start using it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 11月, 2010 1 次提交
-
-
由 Ben Greear 提交于
Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2010 4 次提交
-
-
由 Samu Onkalo 提交于
Create sub directory Documentation/leds and add short documentation for LP5521 and LP5523 drivers. Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Acked-by: NRichard Purdie <rpurdie@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Rosenberg 提交于
The kernel syslog contains debugging information that is often useful during exploitation of other vulnerabilities, such as kernel heap addresses. Rather than futilely attempt to sanitize hundreds (or thousands) of printk statements and simultaneously cripple useful debugging functionality, it is far simpler to create an option that prevents unprivileged users from reading the syslog. This patch, loosely based on grsecurity's GRKERNSEC_DMESG, creates the dmesg_restrict sysctl. When set to "0", the default, no restrictions are enforced. When set to "1", only users with CAP_SYS_ADMIN can read the kernel syslog via dmesg(8) or other mechanisms. [akpm@linux-foundation.org: explain the config option in kernel.txt] Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NEugene Teo <eugeneteo@kernel.org> Acked-by: NKees Cook <kees.cook@canonical.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
/proc/pid/oom_adj was deprecated in August 2010 with the introduction of the new oom killer heuristic. This patch copies the Documentation/feature-removal-schedule.txt entry for this tunable to the Documentation/ABI/obsolete directory so nobody misses it. Signed-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 11月, 2010 4 次提交
-
-
由 Randy Dunlap 提交于
Remove anticipatory block I/O scheduler info from Documentation/ since the code has been deleted. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Reported-by: N"Robert P. J. Day" <rpjday@crashcourse.ca> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Brandon Philips 提交于
drivers/base/intf.c was removed before the beginning of (git) time but its Documentation stuck around. Remove it. Signed-off-by: NBrandon Philips <brandon@ifup.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark Brown 提交于
Since the OPP API is only useful with an appropraite SoC-specific implementation there is no point in offering the ability to enable the API on general systems. Provide an ARCH_HAS OPP Kconfig symbol which masks out the option unless selected by an implementation. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NNishanth Menon <nm@ti.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Christoph Hellwig 提交于
We promised to do this for 2.6.37, and the code looks stable enough to keep that promise. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 10 11月, 2010 1 次提交
-
-
由 Tomi Valkeinen 提交于
The DSS documentation didn't mention the option to give the VRAM start address. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 01 11月, 2010 2 次提交
-
-
由 David Woodhouse 提交于
These are the extra 'Integrated Device Function' SMBus controllers found on the Patsburg chipset. Mention the absence of slave mode support. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Seth Heasley 提交于
Add support for the Intel Patsburg PCH SMBus Controller. Signed-off-by: NSeth Heasley <seth.heasley@intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 31 10月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
This one was only used for a nasty hack in nfsd, which has recently been removed. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 10月, 2010 1 次提交
-
-
由 Jason Wessel 提交于
Add an example of how to add a dynamic kdb shell command via a kernel module. Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
- 29 10月, 2010 5 次提交
-
-
由 Jean Delvare 提交于
Add support for the IT8721F/IT8758E. These new chips differ from the older IT87xxF chips in the following ways: * ADC LSB is 12 mV instead of 16 mV. * PWM values are 8-bit instead of 7-bit. There are other minor changes we don't have to care about in the driver. Another change is that we will handle internal voltage scaling in the driver instead of delegating the work to user-space. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The ADT7468 supports a high-frequency PWM output mode where all PWM outputs are driven by a 22.5 kHz clock. Add support for this mode, and document it, as it may surprise the user that setting one PWM output frequency also affects the other PWM outputs. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Darrick J. Wong <djwong@us.ibm.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Darrick J. Wong <djwong@us.ibm.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
The PCF8591 can't be detected, don't even try. There are plenty of other means to instantiate i2c devices these days. Signed-off-by: NJean Delvare <khali@linux-fr.org> Reviewed-by: NGuenter Roeck <guenter.roeck@ericsson.com> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
由 Jean Delvare 提交于
I was wondering if that chip ever existed publicly... Apparently yes, so add support for it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-