Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 08 3月, 2009 1 次提交
    • C
      x86: UV: remove uv_flush_tlb_others() WARN_ON · 3a450de1
      由 Cliff Wickman 提交于 
      In uv_flush_tlb_others() (arch/x86/kernel/tlb_uv.c),
the "WARN_ON(!in_atomic())" fails if CONFIG_PREEMPT is not enabled.

And CONFIG_PREEMPT is not enabled by default in the distribution that
most UV owners will use.

We could #ifdef CONFIG_PREEMPT the warning, but that is not good form.
And there seems to be no suitable fix to in_atomic() when CONFIG_PREMPT
is not on.

As Ingo commented:

  > and we have no proper primitive to test for atomicity. (mainly
  > because we dont know about atomicity on a non-preempt kernel)

So we drop the WARN_ON.
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3a450de1
  3. 07 3月, 2009 1 次提交
    • T
      percpu: finer grained locking to break deadlock and allow atomic free · ccea34b5
      由 Tejun Heo 提交于 
      Impact: fix deadlock and allow atomic free

Percpu allocation always uses GFP_KERNEL and whole alloc/free paths
were protected by single mutex.  All percpu allocations have been from
GFP_KERNEL-safe context and the original allocator had this assumption
too.  However, by protecting both alloc and free paths with the same
mutex, the new allocator creates free -> alloc -> GFP_KERNEL
dependency which the original allocator didn't have.  This can lead to
deadlock if free is called from FS or IO paths.  Also, in general,
allocators are expected to allow free to be called from atomic
context.

This patch implements finer grained locking to break the deadlock and
allow atomic free.  For details, please read the "Synchronization
rules" comment.

While at it, also add CONTEXT: to function comments to describe which
context they expect to be called from and what they do to it.

This problem was reported by Thomas Gleixner and Peter Zijlstra.

  http://thread.gmane.org/gmane.linux.kernel/802384Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Reported-by: NPeter Zijlstra <peterz@infradead.org>
      ccea34b5
  5. 06 3月, 2009 11 次提交
    • T
      percpu: move fully free chunk reclamation into a work · a56dbddf
      由 Tejun Heo 提交于 
      Impact: code reorganization for later changes

Do fully free chunk reclamation using a work.  This change is to
prepare for locking changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
      a56dbddf
    • T
      percpu: move chunk area map extension out of area allocation · 9f7dcf22
      由 Tejun Heo 提交于 
      Impact: code reorganization for later changes

Separate out chunk area map extension into a separate function -
pcpu_extend_area_map() - and call it directly from pcpu_alloc() such
that pcpu_alloc_area() is guaranteed to have enough area map slots on
invocation.

With this change, pcpu_alloc_area() does only area allocation and the
only failure mode is when the chunk doens't have enough room, so
there's no need to distinguish it from memory allocation failures.
Make it return -1 on such cases instead of hacky -ENOSPC.
Signed-off-by: NTejun Heo <tj@kernel.org>
      9f7dcf22
    • T
      percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free() · 1880d93b
      由 Tejun Heo 提交于 
      Impact: code reorganization for later changes

With static map handling moved to pcpu_split_block(), pcpu_realloc()
only clutters the code and it's also unsuitable for scheduled locking
changes.  Implement and use pcpu_mem_alloc/free() instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
      1880d93b
    • T
      x86, percpu: setup reserved percpu area for x86_64 · 6b19b0c2
      由 Tejun Heo 提交于 
      Impact: fix relocation overflow during module load

x86_64 uses 32bit relocations for symbol access and static percpu
symbols whether in core or modules must be inside 2GB of the percpu
segement base which the dynamic percpu allocator doesn't guarantee.
This patch makes x86_64 reserve PERCPU_MODULE_RESERVE bytes in the
first chunk so that module percpu areas are always allocated from the
first chunk which is always inside the relocatable range.

This problem exists for any percpu allocator but is easily triggered
when using the embedding allocator because the second chunk is located
beyond 2GB on it.

This patch also changes the meaning of PERCPU_DYNAMIC_RESERVE such
that it only indicates the size of the area to reserve for dynamic
allocation as static and dynamic areas can be separate.  New
PERCPU_DYNAMIC_RESERVED is increased by 4k for both 32 and 64bits as
the reserved area separation eats away some allocatable space and
having slightly more headroom (currently between 4 and 8k after
minimal boot sans module area) makes sense for common case
performance.

x86_32 can address anywhere from anywhere and doesn't need reserving.

Mike Galbraith first reported the problem first and bisected it to the
embedding percpu allocator commit.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMike Galbraith <efault@gmx.de>
Reported-by: NJaswinder Singh Rajput <jaswinder@kernel.org>
      6b19b0c2
    • T
      percpu, module: implement reserved allocation and use it for module percpu variables · edcb4639
      由 Tejun Heo 提交于 
      Impact: add reserved allocation functionality and use it for module
	percpu variables

This patch implements reserved allocation from the first chunk.  When
setting up the first chunk, arch can ask to set aside certain number
of bytes right after the core static area which is available only
through a separate reserved allocator.  This will be used primarily
for module static percpu variables on architectures with limited
relocation range to ensure that the module perpcu symbols are inside
the relocatable range.

If reserved area is requested, the first chunk becomes reserved and
isn't available for regular allocation.  If the first chunk also
includes piggy-back dynamic allocation area, a separate chunk mapping
the same region is created to serve dynamic allocation.  The first one
is called static first chunk and the second dynamic first chunk.
Although they share the page map, their different area map
initializations guarantee they serve disjoint areas according to their
purposes.

If arch doesn't setup reserved area, reserved allocation is handled
like any other allocation.
Signed-off-by: NTejun Heo <tj@kernel.org>
      edcb4639
    • T
      percpu: add an indirection ptr for chunk page map access · 3e24aa58
      由 Tejun Heo 提交于 
      Impact: allow sharing page map, no functional difference yet

Make chunk->page access indirect by adding a pointer and renaming the
actual array to page_ar.  This will be used by future changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
      3e24aa58
    • T
      x86: make embedding percpu allocator return excessive free space · 9a4f8a87
      由 Tejun Heo 提交于 
      Impact: reduce unnecessary memory usage on certain configurations

Embedding percpu allocator allocates unit_size *
smp_num_possible_cpus() bytes consecutively and use it for the first
chunk.  However, if the static area is small, this can result in
excessive prellocated free space in the first chunk due to
PCPU_MIN_UNIT_SIZE restriction.

This patch makes embedding percpu allocator preallocate only what's
necessary as described by PERPCU_DYNAMIC_RESERVE and return the
leftover to the bootmem allocator.
Signed-off-by: NTejun Heo <tj@kernel.org>
      9a4f8a87
    • T
      percpu: use negative for auto for pcpu_setup_first_chunk() arguments · cafe8816
      由 Tejun Heo 提交于 
      Impact: argument semantic cleanup

In pcpu_setup_first_chunk(), zero @unit_size and @dyn_size meant
auto-sizing.  It's okay for @unit_size as 0 doesn't make sense but 0
dynamic reserve size is valid.  Alos, if arch @dyn_size is calculated
from other parameters, it might end up passing in 0 @dyn_size and
malfunction when the size is automatically adjusted.

This patch makes both @unit_size and @dyn_size ssize_t and use -1 for
auto sizing.
Signed-off-by: NTejun Heo <tj@kernel.org>
      cafe8816
    • T
      percpu: improve first chunk initial area map handling · 61ace7fa
      由 Tejun Heo 提交于 
      Impact: no functional change

When the first chunk is created, its initial area map is not allocated
because kmalloc isn't online yet.  The map is allocated and
initialized on the first allocation request on the chunk.  This works
fine but the scattering of initialization logic between the init
function and allocation path is a bit confusing.

This patch makes the first chunk initialize and use minimal statically
allocated map from pcpu_setpu_first_chunk().  The map resizing path
still needs to handle this specially but it's more straight-forward
and gives more latitude to the init path.  This will ease future
changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
      61ace7fa
    • T
      percpu: cosmetic renames in pcpu_setup_first_chunk() · 2441d15c
      由 Tejun Heo 提交于 
      Impact: cosmetic, preparation for future changes

Make the following renames in pcpur_setup_first_chunk() in preparation
for future changes.

* s/free_size/dyn_size/
* s/static_vm/first_vm/
* s/static_chunk/schunk/
Signed-off-by: NTejun Heo <tj@kernel.org>
      2441d15c
    • T
      percpu: clean up percpu constants · 6a242909
      由 Tejun Heo 提交于 
      Impact: cleaup

Make the following cleanups.

* There isn't much arch-specific about PERCPU_MODULE_RESERVE.  Always
  define it whether arch overrides PERCPU_ENOUGH_ROOM or not.

* blackfin overrides PERCPU_ENOUGH_ROOM to align static area size.  Do
  it by default.

* percpu allocation sizes doesn't have much to do with the page size.
  Don't use PAGE_SHIFT in their definition.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Bryan Wu <cooloney@kernel.org>
      6a242909
  7. 04 3月, 2009 4 次提交
  9. 03 3月, 2009 23 次提交