Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 11 5月, 2016 1 次提交
    • V
      irqchip: Add LPC32xx interrupt controller driver · 8cb17b5e
      由 Vladimir Zapolskiy 提交于 
      The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2
interrupt controllers.

This is a list of new features in comparison to the legacy driver:
* irq types are taken from device tree settings, no more need to
  hardcode them,
* old driver is based on irq_domain_add_legacy, which causes problems
  with handling MIC hardware interrupt 0 produced by SIC1,
* there is one driver for MIC, SIC1 and SIC2, no more need to handle
  them separately, e.g. have two separate handlers for SIC1 and SIC2,
* the driver does not have any dependencies on hardcoded register
  offsets,
* the driver is much simpler for maintenance,
* SPARSE_IRQS option is supported.

Legacy LPC32xx interrupt controller driver was broken since commit
76ba59f8 ("genirq: Add irq_domain-aware core IRQ handler"), which
requires a private interrupt handler, otherwise any SIC1 generated
interrupt (mapped to MIC hwirq 0) breaks the kernel with the message
"unexpected IRQ trap at vector 00".

The change disables compilation of a legacy driver found at
arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate
commit.

Fixes: 76ba59f8 ("genirq: Add irq_domain-aware core IRQ handler")
Tested-by: NSylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      8cb17b5e
  3. 09 5月, 2016 1 次提交
  5. 04 5月, 2016 1 次提交
  7. 02 5月, 2016 1 次提交
    • M
      irqchip: Add per-cpu interrupt partitioning library · 9e2c986c
      由 Marc Zyngier 提交于 
      We've unfortunately started seeing a situation where percpu interrupts
are partitioned in the system: one arbitrary set of CPUs has an
interrupt connected to a type of device, while another disjoint
set of CPUs has the same interrupt connected to another type of device.

This makes it impossible to have a device driver requesting this interrupt
using the current percpu-interrupt abstraction, as the same interrupt number
is now potentially claimed by at least two drivers, and we forbid interrupt
sharing on per-cpu interrupt.

A solution to this is to turn things upside down. Let's assume that our
system describes all the possible partitions for a given interrupt, and
give each of them a unique identifier. It is then possible to create
a namespace where the affinity identifier itself is a form of interrupt
number. At this point, it becomes easy to implement a set of partitions
as a cascaded irqchip, each affinity identifier being the HW irq.

This allows us to keep a number of nice properties:
- Each partition results in a separate percpu-interrupt (with a restrictied
  affinity), which keeps drivers happy.
- Because the underlying interrupt is still per-cpu, the overhead of
  the indirection can be kept pretty minimal.
- The core code can ignore most of that crap.

For that purpose, we implement a small library that deals with some of
the boilerplate code, relying on platform-specific drivers to provide
a description of the affinity sets and a set of callbacks.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      9e2c986c
  9. 09 3月, 2016 1 次提交
  11. 19 2月, 2016 1 次提交
  13. 18 2月, 2016 1 次提交
  15. 17 2月, 2016 3 次提交
  17. 08 2月, 2016 1 次提交
    • S
      irqchips/bmips: Add bcm6345-l1 interrupt controller · c7c42ec2
      由 Simon Arlott 提交于 
      Add the BCM6345 interrupt controller based on the SMP-capable BCM7038
and the BCM3380 but with packed interrupt registers.

Add the BCM6345 interrupt controller to a list with the existing BCM7038
so that interrupts on CPU1 are not ignored.

Update the maintainers file list for BMIPS to include this driver.
Signed-off-by: NSimon Arlott <simon@fire.lp0.eu>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: linux-mips@linux-mips.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Rob Herring <robh@kernel.org>
Link: http://lkml.kernel.org/r/5651D176.6030908@simon.arlott.org.ukSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      c7c42ec2
  19. 24 1月, 2016 1 次提交
  21. 29 12月, 2015 1 次提交
  23. 18 12月, 2015 1 次提交
    • M
      irqchip/mgigen: Add platform device driver for mbigen device · 717c3dbc
      由 Ma Jun 提交于 
      Mbigen means Message Based Interrupt Generator(MBIGEN).

Its a kind of interrupt controller that collects
the interrupts from external devices and generate msi interrupt.
Mbigen is applied to reduce the number of wire connected interrupts.

As the peripherals increasing, the interrupts lines needed is
increasing much, especially on the Arm64 server SOC.

Therefore, the interrupt pin in GIC is not enough to cover so
many peripherals.

Mbigen is designed to fix this problem.

Mbigen chip locates in ITS or outside of ITS.

Mbigen chip hardware structure shows as below:

		mbigen chip
|---------------------|-------------------|
mgn_node0	  mgn_node1		mgn_node2
 |		 |-------|		|-------|------|
dev1		dev1    dev2		dev1   dev3   dev4

Each mbigen chip contains several mbigen nodes.

External devices can connect to mbigen node through wire connecting way.

Because a mbigen node only can support 128 interrupt maximum, depends
on the interrupt lines number of devices, a device can connects to one
more mbigen nodes.

Also, several different devices can connect to a same mbigen node.

When devices triggered interrupt,mbigen chip detects and collects
the interrupts and generates the MBI interrupts by writing the ITS
Translator register.

To simplify mbigen driver,I used a new conception--mbigen device.
Each mbigen device is initialized as a platform device.

Mbigen device presents the parts(register, pin definition etc.) in
mbigen chip corresponding to a peripheral device.

So from software view, the structure likes below

	            mbigen chip
     |---------------------|-----------------|
mbigen device1       mbigen device2  mbigen device3
      |                   |                |
     dev1                dev2             dev3
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMa Jun <majun258@huawei.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      717c3dbc
  25. 16 12月, 2015 1 次提交
    • L
      irqchip/gic: Support RealView variant setup · 8673c1d7
      由 Linus Walleij 提交于 
      The ARM RealView PB11MPCore reference design has some special
bits in a system controller register to set up the GIC in one
of three modes: legacy, new with DCC, new without DCC. The
register is also used to enable FIQ.

Since the platform will not boot unless this register is set
up to "new with DCC" mode, we need a special quirk to be
compiled-in for the RealView platforms.

If we find the right compatible string on the GIC TestChip,
we enable this quirk by looking up the system controller and
enabling the special bits.

We depend on the CONFIG_REALVIEW_DT Kconfig symbol as the old
boardfile code has the same fix hardcoded, and this is only
needed for the attempts to modernize the RealView code using
device tree.

After fixing this, the PB11MPCore boots with device tree
only.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      8673c1d7
  27. 14 10月, 2015 1 次提交
  29. 25 8月, 2015 1 次提交
  31. 21 8月, 2015 1 次提交
  33. 01 8月, 2015 1 次提交
  35. 30 7月, 2015 2 次提交
  37. 23 6月, 2015 1 次提交
  39. 22 6月, 2015 2 次提交
  41. 28 5月, 2015 1 次提交
  43. 01 4月, 2015 1 次提交
    • K
      IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers · 5f7f0317
      由 Kevin Cernekee 提交于 
      This is the main peripheral IRQ controller on the BCM7xxx MIPS chips;
it has the following characteristics:

 - 64 to 160+ level IRQs
 - Atomic set/clear registers
 - Reasonably predictable register layout (N status words, then N
   mask status words, then N mask set words, then N mask clear words)
 - SMP affinity supported on most systems
 - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3

This driver registers one IRQ domain and one IRQ chip to cover all
instances of the block.  Up to 4 instances of the block may appear, as
it supports 4-way IRQ affinity on BCM7435.

The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC
is used instead.  So this driver is primarily intended for MIPS STB chips.
Signed-off-by: NKevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: abrestic@chromium.org
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8844/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
      5f7f0317
  45. 15 3月, 2015 1 次提交
  47. 08 3月, 2015 1 次提交
    • S
      irqchip: vf610-mscm-ir: Add support for Vybrid MSCM interrupt router · 0494e11a
      由 Stefan Agner 提交于 
      This adds support for Vybrid's interrupt router. On VF6xx models,
almost all peripherals can be used by either of the two CPU's,
the Cortex-A5 or the Cortex-M4. The interrupt router routes the
peripheral interrupts to the configured CPU.

This IRQ chip driver configures the interrupt router to route
the requested interrupt to the CPU the kernel is running on.
The driver makes use of the irqdomain hierarchy support. The
parent is given by the device tree. This should be one of the
two possible parents either ARM GIC or the ARM NVIC interrupt
controller. The latter is currently not yet supported.

Note that there is no resource control mechnism implemented to
avoid concurrent access of the same peripheral. The user needs
to make sure to use device trees which assign the peripherals
orthogonally. However, this driver warns the user in case the
interrupt is already configured for the other CPU. This provides
a poor man's resource controller.
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NStefan Agner <stefan@agner.ch>
Link: https://lkml.kernel.org/r/1425249689-32354-2-git-send-email-stefan@agner.chSigned-off-by: NJason Cooper <jason@lakedaemon.net>
      0494e11a
  49. 04 3月, 2015 1 次提交
  51. 26 1月, 2015 1 次提交
  53. 26 11月, 2014 3 次提交
  55. 24 11月, 2014 1 次提交
  57. 09 11月, 2014 1 次提交
  59. 17 9月, 2014 1 次提交
  61. 14 9月, 2014 1 次提交
  63. 20 8月, 2014 1 次提交
  65. 18 8月, 2014 1 次提交
  67. 17 7月, 2014 1 次提交