Preserve all 8 bytes of the LunID field returned
by CCISS_REPORT_LOGICAL instead of only saving 4 bytes.
This fixes a bug with logical volume addressing encountered on
an MSA2012.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Dynamically allocate struct device for each logical drive as needed
instead of allocating the maximum we would ever need at driver init time.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Replace the use of one scan kthread per controller with one per driver.
Use a queue to hold a list of controllers that need to be rescanned with
routines to add and remove controllers from the queue.

Fix locking and completion handling to prevent a hang during rmmod.
Signed-off-by: NAndrew Patterson <andrew.patterson@hp.com>
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Now that the cciss SCSI error handling routines operate with interrupts
enabled, we no longer need to maintain the list of command completions that
sendcmd() might inadvertantly scoop up, since now it only runs at driver init
time, and there won't be any other commands for it to scoop up.  So we
can remove that list and the code that adds to it and processes it.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Separate the error processing from sendcmd_withirq_core from the code
which retries commands.  The rationale for this is that the SCSI error
handling code can then be made to use sendcmd_withirq_core, but avoid
retrying commands.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Add sysfs entries to the cciss driver needed for the dm/multipath tools.

A file for vendor, model, rev, and unique_id is added for each logical
drive under directory /sys/bus/pci/devices/<dev>/ccissX/cXdY.  Where X =
the controller (or host) number and Y is the logical drive number.

A link from /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY to
/sys/block/cciss!cXdY/device is also created.  A bus is created in
/sys/bus/cciss.  A link is created from the pci ccissX entry to
/sys/bus/cciss/devices/ccissX.  Please consider this for inclusion.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The MSA2012 cannot inform the driver of configuration changes since all
management is out of band.  This is a departure from any storage we have
supported in the past.  We need some way to detect changes on the topology
so we implement this kernel thread.  In some instances there's nothing we
can do from the driver (like LUN failure) so just print out a message.  In
the case where logical volumes are added or deleted we call
rebuild_lun_table to refresh the driver's view of the world.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This both cleans up the code and also helps detect the spurious case
of a command attempted being removed from a queue it doesn't belong
to.
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This patch makes the rebuild_lun_table smart enough to not rip a logical
volume out from under the OS. Without this fix if a customer is running
hpacucli to monitor their storage the driver will blindly remove and re-add
the disks whenever the utility calls the CCISS_REGNEWD ioctl. Unfortunately,
both hpacucli and ACUXE call the ioctl repeatedly. Customers have reported
IO coming to a standstill. Calling the ioctl is the problem, this patch is
the fix.
Signed-off-by: NStephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Add the support for a large number of logical volumes.  We will soon have
hardware that support up to 1024 logical volumes.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Change the blk_queue_max_sectors from 512 to 2048.  This helps increase
performance.

[akpm@osdl.org: s/sector_size/max_sectors/]
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove #define NR_CMDS and replace it w/hba[i]->nr_cmds.  Most Smart Array
controllers can support up to 1024 commands but the E200 family can only
support 128.  To prevent annoying "fifo full" messages we define nr_cmds on a
per controller basis by adding it the product table.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Acked-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for logical volumes >2TB.  All SAS/SATA controllers support
large volumes.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We should call pci_request_regions() to claim all resources the device
decodes.  Previously, we claimed only the I/O port range.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NJeff Garzik <jeff@garzik.org>
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This sneaked in with one of the updates.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This creates a new function, cciss_interrupt_mode called from
cciss_pci_init.  This function determines what type of interrupt vector to
use, i.e., MSI, MSI-X, or IO-APIC.

One noticeable difference is changing the interrupt field of the controller
struct to an array of 4 unsigned ints.  The Smart Array HW is capable of
generating 4 distinct interrupts depending on the transport method in use
during operation.  These are:

#define DOORBELL_INT 0
Used to notify the contoller of configuration updates. We only use
this feature when in polling mode.

#define PERF_MODE_INT 0
Used when the controller is in Performant Mode.

#define SIMPLE_MODE_INT 2
Used when the controller is in Simple Mode (current Linux implementation).

#define MEMQ_INT_MODE 3
Not used.

When using IO-APIC interrupts these 4 lines are OR'ed together so when any
one fires an interrupt an is generated.  In MSI or MSI-X mode this hardware
OR'ing is ignored.  We must register for our interrupt depending on what
mode the controller is running.  For Linux we use SIMPLE_MODE_INT
exclusively at this time.  Please consider this for inclusion.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds SCSI error handling code to the SCSI portion
of the cciss driver.
Signed-off-by: NStephen M. Cameron <steve.cameron@hp.com>
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch changes the way we complete commands.  In the old method when we
got a completion we searched our command list from the top until we find it.

This method uses a tag associated with each command (not SCSI command tagging)
to index us directly to the completed command.  This helps performance.
Signed-off-by: NDon Brace <dab@hp.com>
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes a couple of functions dealing with configuration and
replaces them with new functions.  This implementation fixes some bugs
associated with the ACUXE.  It also allows a logical volume to be removed from
the middle without deleting all volumes behind it.

If a user has 5 logical volumes and decides he wants to reconfigure volume
number 3, he can now do that without removing volumes 4 & 5 first.  This code
has been tested in our labs against all application software.
Signed-off-by: NChase Maupin <chase.maupin@hp.com>
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a flag called busy_initializing.  If there are multiple
controllers in a server AND the HP agents are running it's possible the agents
may try to poll a card that is still initializing if the driver is removed and
then added again.
Signed-off-by: NDon Brace <dab@hp.com>
Signed-off-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds per disk queue functionality to cciss.  Sometime back I
submitted a patch but it looks like only part of what I needed.  In the 2.6
kernel if we have more than one logical volume the driver will Oops during
rmmod.  It seems all of the queues actually point back to the same queue.
So after deleting the first volume you hit a null pointer on the second
one.

This has been tested in our labs.  There is no difference in performance,
it just fixes the Oops.
Signed-off-by: NMike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!