ipath_dbg doesn't need the same prefixes that printk does.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch adds support for multiple RDMA reads and atomics to be sent
before an ACK is required to be seen by the requester.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If a post send is done in loopback and there is no receive queue
entry, the sending QP is put on a timeout list for a while so the
receiver has a chance to post a receive buffer. If the another post
send is done, the code incorrectly tried to put the QP on the timeout
list again an corrupted the timeout list. This eventually leads to a
spin lock deadlock NMI due to the timer function looping forever with
the lock held.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

A silly programming error causes a CQ entry to not be generated if a
SRQ limit event is generated.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

A recent change was made to allocate memory for a port after CPU
affinity is set. That change didn't account for subports and was
trying to allocate memory for the port twice.
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The chip documentation on the expected TID vs eager TID parity error
bits was reversed from what was implemented in the RTL, for both
chips.  This corrects the definitions.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The loop which initializes the user memory region from an array of
pages was using the wrong limit for the array.  This worked OK when
dma_map_sg() returned the same number as the number of pages.  This
patch fixes the problem.
Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This is a sticky state.  It is useful for diagnosing problems with
boards versus cable/switch problems.
Signed-off-by: NDave Olson <dave.olson@qlogic.com>
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

There's no point in printing the opcode field in the completion
handling debugging output, since the type of completion is already
printed at the beginning of the line.  In fact the opcode field is not
even defined for completions with a status other than success.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The current ib_umad code never accesses bits past IB_UMAD_MAX_PORTS in
dev_map[].  We shouldn't declare it to be twice as big.
Pointed-out-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NHal Rosenstock <halr@voltaire.com>

Since commit b1c1b6a3 ("IB/ipath: merge ipath_core and ib_ipath
drivers"), CONFIG_IPATH_CORE no longer exists, so there's no reason to
have a line for it in drivers/Makefile.

Pointed out by Robert P. J. Day <rpjday@mindspring.com>.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BRIDGE]: Unaligned access when comparing ethernet addresses
  [SCTP]: Unmap v4mapped addresses during SCTP_BINDX_REM_ADDR operation.
  [SCTP]: Fix assertion (!atomic_read(&sk->sk_rmem_alloc)) failed message
  [NET]: Set a separate lockdep class for neighbour table's proxy_queue
  [NET]: Fix UDP checksum issue in net poll mode.
  [KEY]: Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx.
  [NET]: Get rid of alloc_skb_from_cache

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Fix data corruption after FMR unmap on Sinai

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86: Fix potential overflow in perfctr reservation
  [PATCH] x86: Fix gcc 4.2 _proxy_pda workaround

* Last write during i2c_xfer is of the wrong byte (off-by-1).
* Read length is wrong for some of the reads (mistakenly used the PEC
  version)
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Looks like a local change I made to be able to test-compile the i2c-pasemi
driver leaked upstream.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users have been complaining about the w83627ehf driver flooding their logs
with debug messages like:

w83627ehf 9191-0a10: Increasing fan 4 clock divider from 64 to 128

or:

w83627ehf 9191-0290: Increasing fan 4 clock divider from 4 to 8

The reason is that we failed to actually write the LSB of the encoded clock
divider value for that fan, causing the next read to report the same old value
again and again.

Additionally, the fan number was improperly reported, making the bug harder to
find.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide an dummy implementation of devm_ioport_map() and
devm_ioport_unmap() to allow drivers (eg, pata_platform) to build for
platforms where CONFIG_NO_IOPORT is selected.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sk_info_authunix is not being protected properly so the object that it
points to can be cache_put twice, leading to corruption.

We borrow svsk->sk_defer_lock to provide the protection.  We should
probably rename that lock to have a more generic name - later.

Thanks to Gabriel for reporting this.

Cc: Greg Banks <gnb@melbourne.sgi.com>
Cc: Gabriel Barazer <gabriel@oxeva.fr>
Signed-off-by: NNeil Brown <neilb@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It got its lock and unlock backwards.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8334

(obviously, this code could be using plain old spin_lock_irq(), too)

Cc: <matthias.kaehlcke@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch should fix or partly fix this bug:
http://bugzilla.kernel.org/show_bug.cgi?id=8276

The problem is:

- if we see "zero link case" during reading inode operation, we call
  ufs_error(which remount fs readonly), but not "mark" inode as bad (1)

- in readonly case we do not fill some data structures, which are used in
  read and write case (2)

- VFS call ufs_delete_inode if link count is zero (3)

so (1)->(3)->(2) cause oops, this patch should fix such scenario
Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru>
Cc: Jim Paris <jim@jtan.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It turns out that the last patch to change set_cs to be kept in the
controller's structure instead of the platform data was an incomplete
change, and did not change the references to platfrom data in the setup
xfer code.  (This can prevent an oops.)

Reported-by: <Ling.Alex@iac.com.tw>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Override compiler .arch directive for generic kernel build.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/alpha/kernel/sys_sx164.c

	Earlier firmware revisions need MVI fix as well.

arch/alpha/kernel/sys_nautilus.c

	On UP1500 firmware reports wrong AGP IRQ (10 instead of 5).
	This causes interrupt storm if there is a PCI device that
	uses IRQ 5.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Files:

arch/alpha/kernel/core_mcpcia.c
arch/alpha/kernel/sys_rawhide.c
include/asm-alpha/core_mcpcia.h

	Determine correct hose configuration; RAWHIDE family can have
        2 or 4 hoses, so make sure non-existent hoses are ignored.

arch/alpha/kernel/err_titan.c

	Supply a needed #include <asm/irq_regs.h>

arch/alpha/kernel/module.c

	Add some useful output to the relocation overflow messages.

arch/alpha/kernel/sys_noritake.c

	Supply necessary noritake_end_irq() to correct interrupt handling.
	This fixes a problem first noted by hangs during boot probing with
	a DE500-BA TULIP NIC present.

arch/alpha/kernel/sys_sio.c

	Correct saving of original PIRQ register (PCI IRQ routing);
	change default PIRQ setting to leave PCI IRQs 9 and 14 free to
	be used for sound (Multia) and IDE (any), respectively.

include/asm-alpha/io.h

	Supply the "isa_virt_to_bus" routine.
Signed-off-by: NJay Estabrook <jay.estabrook@hp.com>
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While digging through my MAP_FIXED changes, I found that rather obvious
bug in /dev/mem mmap implementation for nommu archs. get_unmapped_area()
is expected to return an address, not a pfn.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-By: NDavid Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make kernel-doc comments match macro names.
Correct parameter names in a few places.
Remove '#' from beginning of kernel-doc comment macro names.
Remove extra (erroneous) blank lines in kernel-doc.

Warning(plist.h:100): Cannot understand  * #PLIST_HEAD_INIT - static struct plist_head initializer on line 100 - I thought it was a doc line
Warning(plist.h:112): Cannot understand  * #PLIST_NODE_INIT - static struct plist_node initializer on line 112 - I thought it was a doc line
Warning(plist.h:103): No description found for parameter '_lock'
Warning(plist.h:129): No description found for parameter 'lock'
Warning(plist.h:158): No description found for parameter 'pos'
Warning(plist.h:169): No description found for parameter 'pos'
Warning(plist.h:169): No description found for parameter 'n'
Warning(plist.h:179): No description found for parameter 'mem'

This still leaves one warning & one error that need attention:
Error(plist.h:219): cannot understand prototype: '('
Warning(plist.h): no structured comments found
Acked-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Daniel Walker <dwalker@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The patch checks for "|" in the pattern not the output and doesn't nail a
pid on to a piped name (as it is a program name not a file)

Also fixes a very very obscure security corner case.  If you happen to have
decided on a core pattern that starts with the program name then the user
can run a program called "|myevilhack" as it stands.  I doubt anyone does
this.
Signed-off-by: NAlan Cox <alan@redhat.com>
Confirmed-by: NChristopher S. Aker <caker@theshore.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trivial change to pass vmsplice arguments through the compat layer on
pp64.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NPaul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

compare_ether_addr() implicitly requires that the addresses
passed are 2-bytes aligned in memory.

This is not true for br_stp_change_bridge_id() and
br_stp_recalculate_bridge_id() in which one of the addresses
is unsigned char *, and thus may not be 2-bytes aligned.
Signed-off-by: NEvgeny Kravtsunov <emkravts@openvz.org>
Signed-off-by: NKirill Korotaev <dev@openvz.org>
Signed-off-by: NPavel Emelianov <xemul@openvz.org>

During the sctp_bindx() call to add additional addresses to the
endpoint, any v4mapped addresses are converted and stored as regular
v4 addresses.  However, when trying to remove these addresses, the
v4mapped addresses are not converted and the operation fails.  This
patch unmaps the addresses on during the remove operation as well.
Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In current implementation, LKSCTP does receive buffer accounting for
data in sctp_receive_queue and pd_lobby. However, LKSCTP don't do
accounting for data in frag_list when data is fragmented. In addition,
LKSCTP doesn't do accounting for data in reasm and lobby queue in
structure sctp_ulpq.
When there are date in these queue, assertion failed message is printed
in inet_sock_destruct because sk_rmem_alloc of oldsk does not become 0
when socket is destroyed.
Signed-off-by: NTsutomu Fujii <t-fujii@nb.jp.nec.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise the following calltrace will lead to a wrong
lockdep warning:

  neigh_proxy_process()
    `- lock(neigh_table->proxy_queue.lock);
  arp_redo /* via tbl->proxy_redo */
  arp_process
  neigh_event_ns
  neigh_update
  skb_queue_purge
    `- lock(neighbor->arp_queue.lock);

This is not a deadlock actually, as neighbor table's proxy_queue
and the neighbor's arp_queue are different queues.

Lockdep thinks there is a deadlock as both queues are initialized
with skb_queue_head_init() and thus have a common class.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In net poll mode, the current checksum function doesn't consider the
kind of packet which is padded to reach a specific minimum length. I
believe that's the problem causing my test case failed. The following
patch fixed this issue.
Signed-off-by: NAubrey.Li <aubreylee@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not blindly convert between IPSEC_MODE_xxx and XFRM_MODE_xxx just
by incrementing / decrementing because the assumption is not true any longer.
Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org>
Singed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Since this was added originally for Xen, and Xen has recently (~2.6.18)
stopped using this function, we can safely get rid of it.  Good timing
too since this function has started to bit rot.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cache_k8_northbridges() is storing config values to incorrect locations
(in flush_words) and also its overflowing beyond the allocation, causing
slab verification failures.
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In mthca_arbel_fmr_unmap(), the high bits of the key are masked off.
This gets rid of the effect of adjust_key(), which makes sure that
bits 3 and 23 of the key are equal when the Sinai throughput
optimization is enabled, and so it may happen that an FMR will end up
with bits 3 and 23 in the key being different.  This causes data
corruption, because when enabling the throughput optimization, the
driver promises the HCA firmware that bits 3 and 23 of all memory keys
will always be equal.

Fix by re-applying adjust_key() after masking the key.

Thanks to Or Gerlitz for reproducing the problem, and Ariel Shahar for
help in debug.
Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6
  [ARM] Update mach-types

Update defconfig to the latest kernel version
and enable the h1940 LED driver
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>