- 14 7月, 2014 1 次提交
-
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2014 7 次提交
-
-
由 Catherine Sullivan 提交于
Bump. Change-ID: Ie0c36583ffd9997679f46bdf89bc462d3e992995 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Add function set_fc to set the requested FC mode. This patch also adds the init of FC setting to get_link_info and replaces the init code to set FC off by default in main. Also adds i40e_set_phy_config to support this. Change-ID: I7b25bbaec81f15777137ab324a095f916e44351d Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Add a new variable, hw.phy.link_info.an_enabled, to track whether autoneg is enabled. Also add a new function update_link_info that will update that variable as well as calling get_link_info to update the rest of the link info. Also add get_phy_capabilities to support this. Change-ID: I5157ef03492b6dd8ec5e608ba0cf9b0db9c01710 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The i40evf_irq_enable and i40evf_fire_sw_interrupt functions were unfairly discriminating against MSI-X vector 0, just because it doesn't handle traffic. That doesn't mean it's not essential to the operation of the driver. This change allows the watchdog to fire vector 0 via software, which makes the driver tolerant of dropped interrupts on that vector. Buck up, vector 0! You can be part of our gang! Change-ID: I37131d955018a6b3e711e1732d21428acd0d767e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul M Stillwell Jr 提交于
Force a shifted '1' to be unsiged to avoid shifting a signed int Change-ID: I688cbd082af0f2e1df548fda25847a5ca04babcf Signed-off-by: NPaul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Move a declaration up one level so we don't dereference it out of scope. This didn't cause any panics, but the details->async field would mysteriously disappear, causing unnecessary delays when sending AQ commands. Also, the code is just plain wrong. Change-ID: I753f64f13c55e5d75ea4351e29b14fb53b2f0104 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
The HW still needs to consume it and freeing it in the function that created it would mean we will be racing with the HW. The i40e_clean_tx_ring() routine will free up the buffer attached once the HW has consumed it. The clean_fdir_tx_irq function had to be fixed to handle the freeing correctly. Cases where we program more than one filter per flow (Ipv4), the code had to be changed to allocate dummy buffer multiple times since it will be freed by the clean routine. This also fixes an issue where the filter program routine was not checking if there were descriptors available for programming a filter. Change-ID: Idf72028fd873221934e319d021ef65a1e51acaf7 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 01 7月, 2014 7 次提交
-
-
由 Catherine Sullivan 提交于
Bump versions. Change-ID: Id5082d7c3995fbddd22b3e303d804c86fcd240a3 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Add a slash to the branding string to reduce confusion and match up with our other marketing materials. Change-ID: I8229e8c3e43083b7a29c859a250f8d2d4dc46b9e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Driver needs to initialize all members of context descriptor. Stale data is possible otherwise. Change-ID: Idc6b53af45583509da42d5ec0824cbaf78aee64f Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
Add new variable defining ASQ command write back timeout to allow for dynamic modification of this timeout. Initialize it on AQ initialize routine with default value, vary it on device ID. Change-ID: I5c9908f9d7c5455634353b694a986d6f146d1b9d Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
In some circumstances, the firmware could beat us to the punch, and the reply from the PF would come back before we were able to properly modify the aq_pending and aq_required flags. This would mess up the flags and put the driver in an indeterminate state, much like Schrödinger's cat. However, unlike the cat, the driver is definitely dead. To fix this, simply set the flags before sending the request to the AQ. This way, it won't matter if the interrupt comes back too soon. Change-ID: I9784655e475675ebcb3140cc7f36f4a96aaadce5 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Clear the AQ BAH and BAL registers on a clean shutdown to help make sure all is tidy when the driver is done. Change-ID: I393e92680247daa52a8e00bab183213672d73578 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the Base Address High and Low to the admin queue struct to simplify another bit of "which context" logic in the config routines. Change-ID: Iae195a7da3baffc1a9d522119e1e2b427068ad07 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 26 6月, 2014 5 次提交
-
-
由 Mitch Williams 提交于
Sometimes the firmware will not indicate an error but fail to pass a message between the VF and the PF driver. If this happens, just resend the request. This fixes an initialization failure if many VFs are instantiated at the same time and the VF module is autoloaded. Change-ID: Idd1ad8da2fd5137859244685c355941427d317d7 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Correct a missing word in a log message. Change-ID: Id94da7d9f842382d073b3947e0b616503e2f8e91 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
When verifying the API version (which is the first time the driver communicates with the firmware and thus the PF driver), there are many ways in which a failure can occur. There may be an error from the firmware, there may be unresponsive firmware, there may be an error from the PF driver, etc, etc. Make this function return more useful information, instead of just -EIO. Propagate FW errors back to the caller, and log a message if the PF sends an invalid reply. Change-ID: I3e9135a2b80f7acdb855f62f12b2b2668c9a8951 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If the VF driver fails to complete early init, then rmmod can cause a softlock when the driver tries to stop a watchdog timer that never even got initialized. Add a check to see if the timer is actually initialized before stopping it. Change-ID: Id9d550aa8838e07f4b02afe7bc017ef983779efc Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Paul M Stillwell Jr 提交于
Fix HMC handling for big endian architectures. Change-ID: Id8c46fc341815d47bfe0af8b819f0ab9a1e9e515 Signed-off-by: NPaul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 25 6月, 2014 2 次提交
-
-
由 Catherine Sullivan 提交于
Bump versions. Change-ID: I47fc3433240800cd823ff512f3015822277b0d20 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
One of the PCTYPES that was moved to a reserved value wasn't removed from the code. Change-ID: I31fafe6d79c5f5128179979af5eaafa8c0cd62fe Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 20 6月, 2014 6 次提交
-
-
由 Catherine Sullivan 提交于
Bump versions. Change-ID: Ifaed5404b9e953a11f4c88953ffe4bc8937705f1 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kamil Krawczyk 提交于
Some AQ debug prints needs be moved around or do additional checks so they will not cause our tool applications to cause segmentation faults. The tools run in user space and we need to correctly reference kernel space memory. Change-ID: Ia2ac4076f576b805f350453fd50ad69c2a91ab9a Signed-off-by: NKamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch changes the RSS configuration to set table size and write to hardware to confirm RSS table size being used. Change-ID: I455a4c09c9dd479f5791ee1f09fdc83ff9908df5 Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The loop in i40evf_get_rxfh_indir was only reading fifteen registers, not all sixteen. Change the matching loop in i40evf_set_rxfh_indir at the same time to make the code more consistent. Change-ID: I6c182287698e742d1f6ca1a4bcc43cc08df6e1de Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michal Kosiarz 提交于
Reset head and tail on admin queue initialization where H/T are not reset by HW. Change-ID: I6db8a2dd3f05ce66410a92cce016191add04760e Signed-off-by: NMichal Kosiarz <michal.kosiarz@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This updates the register file for new hardware. The format of the file has changed requiring drivers to declare I40E_MASK. I40E_MASK is to be used with 32 bit registers. This patch also updates the drivers to accommodate the register changes. Change-ID: If9bc8d736391024cbf99054efe50f9acc12ee4f1 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 11 6月, 2014 8 次提交
-
-
由 Catherine Sullivan 提交于
Bump versions. Change-ID: Ic4a84354955061ca18321b1e97c9c30fe1563b5c Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This change drops the FTYPE field from the Rx descriptor, to match the hardware implementation. Change-ID: I66d31d2b43861da45e8ace4fb03df033abe88bab Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
FW can indicate any admin queue error states to the driver via some bits in the length registers. Each time we process an admin queue message, check these bits and log any errors we find. Since the VF really can't do much, we just print the message and depend on the PF driver to clear things up on our behalf. Change-ID: I92bc6c53ce3b4400544e0ca19c5de2d27490bd0d Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Linux gives us a function to copy Ethernet MAC addresses, let's use it. Change-ID: I0c861900029ca5ea65a53ca39565852fb633f6fd Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
If the device is down, there's no place to go but up, so don't try to go down even more. This prevents a CPU soft lock in napi_disable(). Change-ID: I8b058b9ee974dfa01c212fae2597f4f54b333314 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add set_pf_context, replace set_phy_reset with set_phy_debug, add nvm_config_read/write, remove nvm_read/write_reg_se and add some PHY types. With these changes we bump the API version to 1.2. Change-ID: I4dc3aec175c2316f66fc9b726b3f7d594699d84e Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Ashish Shah 提交于
Set appropriate fields in Tx queue configuration virtchnl message to pf to enable headwb and setup headwb addr. Then use that info from the VF to set headwb and headwb_addr instead of always enabling them. Change-ID: I7d393d1b2b07f0f3355b3a4f7c2d3c6ee3b0d622 Signed-off-by: NAshish Shah <ashish.n.shah@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 09 6月, 2014 3 次提交
-
-
由 Shannon Nelson 提交于
Bumpity and Fred Worm say it's time to change the numbers again. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Change-ID: I658731d022ea23cedede4be2bfecd8b4cc68d270 Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Catherine Sullivan 提交于
Fix function header comment to have the correct function name. Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 6月, 2014 1 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.4.5 and i40evf to 0.9.29. Change-ID: I9faca5544446518c5425612e733499cf16ef20a1 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-