- 28 9月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
There are numerous broken references to Documentation files (in other Documentation files, in comments, etc.). These broken references are caused by typo's in the references, and by renames or removals of the Documentation files. Some broken references are simply odd. Fix these broken references, sometimes by dropping the irrelevant text they were part of. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 07 1月, 2011 3 次提交
-
-
由 Nick Piggin 提交于
dget_locked was a shortcut to avoid the lazy lru manipulation when we already held dcache_lock (lru manipulation was relatively cheap at that point). However, how that the lru lock is an innermost one, we never hold it at any caller, so the lock cost can now be avoided. We already have well working lazy dcache LRU, so it should be fine to defer LRU manipulations to scan time. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
dcache_lock no longer protects anything. remove it. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
由 Nick Piggin 提交于
Make d_count non-atomic and protect it with d_lock. This allows us to ensure a 0 refcount dentry remains 0 without dcache_lock. It is also fairly natural when we start protecting many other dentry members with d_lock. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
- 26 10月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Instead of always assigning an increasing inode number in new_inode move the call to assign it into those callers that actually need it. For now callers that need it is estimated conservatively, that is the call is added to all filesystems that do not assign an i_ino by themselves. For a few more filesystems we can avoid assigning any inode number given that they aren't user visible, and for others it could be done lazily when an inode number is actually needed, but that's left for later patches. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 05 6月, 2010 2 次提交
-
-
由 Nick Piggin 提交于
sysfs and configfs setattr functions have error cases after the generic inode's attributes have been changed. Fix consistency by changing the generic inode attributes only when it is guaranteed to succeed. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Nick Piggin 提交于
sysfs and configfs setattr functions have error cases after the generic inode's attributes have been changed. Fix consistency by changing the generic inode attributes only when it is guaranteed to succeed. Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 5月, 2010 1 次提交
-
-
由 Nick Piggin 提交于
Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate sequence. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 11 9月, 2009 1 次提交
-
-
由 Jens Axboe 提交于
This enables us to track who does what and print info. Its main use is catching dirty inodes on the default_backing_dev_info, so we can fix that up. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 01 5月, 2009 1 次提交
-
-
由 Louis Rilling 提交于
When attaching default groups (subdirs) of a new group (in mkdir() or in configfs_register()), configfs recursively takes inode's mutexes along the path from the parent of the new group to the default subdirs. This is needed to ensure that the VFS will not race with operations on these sub-dirs. This is safe for the following reasons: - the VFS allows one to lock first an inode and second one of its children (The lock subclasses for this pattern are respectively I_MUTEX_PARENT and I_MUTEX_CHILD); - from this rule any inode path can be recursively locked in descending order as long as it stays under a single mountpoint and does not follow symlinks. Unfortunately lockdep does not know (yet?) how to handle such recursion. I've tried to use Peter Zijlstra's lock_set_subclass() helper to upgrade i_mutexes from I_MUTEX_CHILD to I_MUTEX_PARENT when we know that we might recursively lock some of their descendant, but this usage does not seem to fit the purpose of lock_set_subclass() because it leads to several i_mutex locked with subclass I_MUTEX_PARENT by the same task. >From inside configfs it is not possible to serialize those recursive locking with a top-level one, because mkdir() and rmdir() are already called with inodes locked by the VFS. So using some mutex_lock_nest_lock() is not an option. I am proposing two solutions: 1) one that wraps recursive mutex_lock()s with lockdep_off()/lockdep_on(). 2) (as suggested earlier by Peter Zijlstra) one that puts the i_mutexes recursively locked in different classes based on their depth from the top-level config_group created. This induces an arbitrary limit (MAX_LOCK_DEPTH - 2 == 46) on the nesting of configfs default groups whenever lockdep is activated but this limit looks reasonably high. Unfortunately, this also isolates VFS operations on configfs default groups from the others and thus lowers the chances to detect locking issues. Nobody likes solution 1), which I can understand. This patch implements solution 2). However lockdep is still not happy with configfs_depend_item(). Next patch reworks the locking of configfs_depend_item() and finally makes lockdep happy. [ Note: This hides a few locking interactions with the VFS from lockdep. That was my big concern, because we like lockdep's protection. However, the current state always dumps a spurious warning. The locking is correct, so I tell people to ignore the warning and that we'll keep our eyes on the locking to make sure it stays correct. With this patch, we eliminate the warning. We do lose some of the lockdep protections, but this only means that we still have to keep our eyes on the locking. We're going to do that anyway. -- Joel ] Signed-off-by: NLouis Rilling <louis.rilling@kerlabs.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 06 1月, 2009 1 次提交
-
-
由 Al Viro 提交于
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 15 7月, 2008 1 次提交
-
-
由 Louis Rilling 提交于
This patch introduces configfs_dirent_lock spinlock to protect configfs_dirent traversals against linkage mutations (add/del/move). This will allow configfs_detach_prep() to avoid locking i_mutexes. Locking rules for configfs_dirent linkage mutations are the same plus the requirement of taking configfs_dirent_lock. For configfs_dirent walking, one can either take appropriate i_mutex as before, or take configfs_dirent_lock. The spinlock could actually be a mutex, but the critical sections are either O(1) or should not be too long (default groups walking in last patch). ChangeLog: - Clarify the comment on configfs_dirent_lock usage - Move sd->s_element init before linking the new dirent - In lseek(), do not release configfs_dirent_lock before the dirent is relinked. Signed-off-by: NLouis Rilling <Louis.Rilling@kerlabs.com> Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-
- 30 4月, 2008 1 次提交
-
-
由 Miklos Szeredi 提交于
Add a new BDI capability flag: BDI_CAP_NO_ACCT_WB. If this flag is set, then don't update the per-bdi writeback stats from test_set_page_writeback() and test_clear_page_writeback(). Misc cleanups: - convert bdi_cap_writeback_dirty() and friends to static inline functions - create a flag that includes all three dirty/writeback related flags, since almst all users will want to have them toghether Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 2 次提交
-
-
由 Peter Zijlstra 提交于
provide BDI constructor/destructor hooks [akpm@linux-foundation.org: compile fix] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Implement new aops for some of the simpler filesystems. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 9月, 2006 2 次提交
-
-
由 Theodore Ts'o 提交于
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Panagiotis Issaris 提交于
Conversions from kmalloc+memset to kzalloc. Signed-off-by: NPanagiotis Issaris <takis@issaris.org> Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
Same as with already do with the file operations: keep them in .rodata and prevents people from doing runtime patching. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 2月, 2006 2 次提交
-
-
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
由 Joel Becker 提交于
configfs always made item and attribute ownership root.root and permissions based on a umask of 022. Add ->setattr() to allow chown(2)/chmod(2), and persist the changes for the lifetime of the items and attributes. Signed-off-by: NJoel Becker <joel.becker@oracle.com> Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
-
- 10 1月, 2006 1 次提交
-
-
由 Jes Sorensen 提交于
This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: NIngo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 1月, 2006 1 次提交
-
-
由 Joel Becker 提交于
Configfs, a file system for userspace-driven kernel object configuration. The OCFS2 stack makes extensive use of this for propagation of cluster configuration information into kernel. Signed-off-by: NJoel Becker <joel.becker@oracle.com>
-