Add emit_reg_wait implementation for UVD v7.

v2: call new function directly from the existing code
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

All HDP invalidation and most flush can now be replaced by the generic
ASIC function.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Unify tlb flushing for gmc v9.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed for vm_flush unification.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

rd the pasid from the VM code to the emit_vm_flush function and update
all implementations with the new parameter.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And rename it to struct gmc_funcs.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NSamuel Li <Samuel.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

sed -i "s/vm_id/vmid/g" drivers/gpu/drm/amd/amdgpu/*.c
sed -i "s/vm_id/vmid/g" drivers/gpu/drm/amd/amdgpu/*.h
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

And also provide the level for which we need a PDE.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the header where it's not used.
Acked-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Handle dynamic offsets correctly in static arrays.
Acked-by: NChristian Konig <christian.koenig@amd.com>
Signed-off-by: NShaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.

One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove asic_reg/vega10 folder.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup asic_reg/vega10/NBIF folder.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup asic_reg/vega10/MMHUB folder.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup asic_reg/vega10/VCE folder.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup asic_reg/vega10/UVD folder,remove unused uvd_7_0_default.h.
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup asic_reg/vega10/HDP folder, remove hdp_4_0_default.h
Signed-off-by: NFeifei Xu <Feifei.Xu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When UVD bo is created, its size is based on the information from firmware
header (ucode_size_bytes). The same value should be be used when programming
UVD mc controller offsets, otherwise it can happen that
(mmUVD_VCPU_CACHE_OFFSET2 + mmUVD_VCPU_CACHE_SIZE2) will point
AMDGPU_GPU_PAGE_SIZE bytes after the UVD bo end.

Second issue is that when programming the mmUVD_VCPU_CACHE_SIZE0 register,
AMDGPU_UVD_FIRMWARE_OFFSET should be taken into account. If it isn't,
(mmUVD_VCPU_CACHE_OFFSET2 + mmUVD_VCPU_CACHE_SIZE2) will always point
AMDGPU_UVD_FIRMWARE_OFFSET bytes after the UVD bo end.

v2: move firmware size calculation into macro definition
v3: align firmware size to the gpu page size
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NPiotr Redlewski <predlewski@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When this VF stays in exclusive mode for long, other VFs will be
impacted.

The redundant messages causes exclusive mode timeout when they're
redirected. That is a normal use case for cloud service to redirect
guest log to virtual serial port.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: Npding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this member will be used later, it will points to
the real var inside of context and CS_SUBMIT & gpu schdduler
can decide if skip a job depends on context->guilty or *entity->guilty
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChunming Zhou <David1.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The workaround is not required anymor and would result in
hangs during suspend/resume cycles if the uvd block were busy.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Acked-by: NLeo Liu <leo.liu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1.Since in sriov there is no need of decoding, so skip the related code;
2.Vcpu boot up and umc enable need to take at the end of the init sequence;
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Now uvd doorbell is from 0xf8-0xfb and vce doorbell is from 0xfc-0xff
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since rptr would not be accessed on later secure asics in sriov, remove
the ring test.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add uvd and vce re-init after gpu reset.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

MMSCH FW need to get the wptr from 0 after it get the mailbox request
from driver, since every time kick the mailbox, mmsch thinks that it
is the first time engine start to initialize.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Rename adjust_mc_addr to get_vm_pde and check the address bits in one place.

v2: handle vcn as well, keep setting the valid bit manually,
    add a BUG_ON() for GMC v6, v7 and v8 as well.
v3: handle vcn_v1_0_enc_ring_emit_vm_flush as well.
v4: fix the BUG_ON mask for GFX6-8
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

That GFX9 needs a PDE in the registers is entirely GFX9 specific.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

According to HW design, need to clean doorbell after setup MMSCH
table.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On vega10, some hw finish operations should not be applied in SR-IOV
case. This works as workaround to fix multi-VFs reboot/shutdown
issues.
Signed-off-by: NTrigger Huang <trigger.huang@amd.com>
Reviewed-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add UVD hw init.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add UVD doorbell for SRIOV.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add UVD initialization for SRIOV.
Signed-off-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For Vega10 we have 18 VM invalidation engines for each VMHUB.

Start to assign them manually to the rings.

v2: add a BUG_ON if we use to many engines
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop invalidating both hubs from each engine.

v2: don't use hardcoded values
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add the info which ring belonging to which VMHUB.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The two hubs are just instances of the same hardware,
so the register bits are identical.

v2: keep the function pointer
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>