- 12 1月, 2008 4 次提交
-
-
由 Boaz Harrosh 提交于
at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Boaz Harrosh 提交于
- Check to see that OVERFLOW is not negative indicating a bug. - Unify handling of UNDERFLOW and OVERFLOW to the same code. - Also handle BIDI_OVERFLOW. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Olaf Kirch 提交于
Rewrite recv path. Fixes: - data digest processing and error handling. - ahs support. Some fixups by Mike Christie Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Mike Christie 提交于
This patch adds logical unit reset support. This should work for ib_iser, but I have not finished testing that driver so it is not hooked in yet. This patch also temporarily reverts the iscsi_tcp r2t write out patch. That code is completely rewritten in this patchset. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 15 11月, 2007 1 次提交
-
-
由 Tony Battersby 提交于
There is a race condition in iscsi_tcp.c that may cause it to forget that it received a R2T from the target. This race may cause a data-out command (such as a write) to lock up. The race occurs here: static int iscsi_send_unsol_pdu(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { struct iscsi_tcp_cmd_task *tcp_ctask = ctask->dd_data; int rc; if (tcp_ctask->xmstate & XMSTATE_UNS_HDR) { BUG_ON(!ctask->unsol_count); tcp_ctask->xmstate &= ~XMSTATE_UNS_HDR; <---- RACE ... static int iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask) { ... tcp_ctask->xmstate |= XMSTATE_SOL_HDR_INIT; <---- RACE ... While iscsi_xmitworker() (called from scsi_queue_work()) is preparing to send unsolicited data, iscsi_tcp_data_recv() (called from tcp_read_sock()) interrupts it upon receipt of a R2T from the target. Both contexts do read-modify-write of tcp_ctask->xmstate. Usually, gcc on x86 will make &= and |= atomic on UP (not guaranteed of course), but in this case iscsi_send_unsol_pdu() reads the value of xmstate before clearing the bit, which causes gcc to read xmstate into a CPU register, test it, clear the bit, and then store it back to memory. If the recv interrupt happens during this sequence, then the XMSTATE_SOL_HDR_INIT bit set by the recv interrupt will be lost, and the R2T will be forgotten. The patch below (against 2.6.24-rc1) converts accesses of xmstate to use set_bit, clear_bit, and test_bit instead of |= and &=. I have tested this patch and verified that it fixes the problem. Another possible approach would be to hold a lock during most of the rx/tx setup and post-processing, and drop the lock only for the actual rx/tx. Signed-off-by: NTony Battersby <tonyb@cybernetics.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
- 27 10月, 2007 1 次提交
-
-
由 Herbert Xu 提交于
This patch fixes the errors made in the users of the crypto layer during the sg_init_table conversion. It also adds a few conversions that were missing altogether. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Most drivers need to set length and offset as well, so may as well fold those three lines into one. Add sg_assign_page() for those two locations that only needed to set the page, where the offset/length is set outside of the function context. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 23 10月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 27 7月, 2007 2 次提交
-
-
由 Mike Christie 提交于
It was found by LSI that on setups with large amounts of memory we were bouncing buffers when we did not need to. If the iscsi tcp code touches the data buffer (or a helper does), it will kmap the buffer. iscsi_tcp also does not interact with hardware, so it does not have any hw dma restrictions. This patch sets the bounce buffer settings for our device queue so buffers should not be bounced because of a driver limit. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This prevents the iscsi modules from being unloaded while there are active mounts from an iscsi target. Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 21 7月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 20 7月, 2007 1 次提交
-
-
由 Al Viro 提交于
Wrong order of arguments Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 6月, 2007 1 次提交
-
-
由 FUJITA Tomonori 提交于
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. TODO: use scsi_for_each_sg(). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 03 6月, 2007 7 次提交
-
-
由 Mike Christie 提交于
iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx), and partial offload (broadcom). To be able to allow each stack or driver or port (virtual or physical) to be able to log into the same target portal we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session. This patch adds the netdev name, which is used by software iscsi when it binds a session to a netdevice using the SO_BINDTODEVICE sock opt. It cannot use HWADDRESS because if someone did vlans then the same netdevice will have the same mac and the initiator,target id will not be unique. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch exports the local address for the session. For qla4xxx this is the ip of the hba's port. For software this is the src addr of the socket. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch should fix the file descriptor leak problem. A quick look through the kernel shows that users of sockfd_lookup use sockfd_put to release their handle. We were using sock_release which from the comments and code look like it does not release the get() on the file from the lookup. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
Add a slave_configure function to iSCSI TCP to remove any DMA alignment restriction. This permits the use of direct IO from arbitrary addresses. Signed-off-by: NPete Wyckoff <pw@osc.edu> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
If we got the padding, data and header in different skbs, we were not handling the padding correctly because we attributed it to the data's skb. This resulted in the initiator reading from pad bytes + skb offset instead of the correct offset. If you could not connect with the open solaris target, this will fix the lock up problem you were hitting. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch allows us to set can_queue and cmds_per_lun from userspace when we create the session/host. From there we can set it on a per target basis. The patch fully converts iscsi_tcp, but only hooks up ib_iser for cmd_per_lun since it currently has a lots of preallocations based on can_queue. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
The cmdsn allocation and pdu transmit code can race, and we can end up sending a pdu with cmdsn 10 before a pdu with 5. The target will then fail the connection/session. This patch fixes the problem by delaying the cmdsn allocation until we are about to send the pdu. This also removes the xmitmutex. We were using the connection xmitmutex during error handling to handle races with mtask and ctask cleanup and completion. For ctasks we now have nice refcounting and for the mtask, if we hit the case where the mtask timesout and it is floating around somewhere in the driver, we end up dropping the session. And to handle session level cleanup, we use the xmit suspend bit along with scsi_flush_queue and the session lock to make sure that the xmit thread is not possibly transmitting a task while we are trying to kill it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 02 6月, 2007 6 次提交
-
-
由 Mike Christie 提交于
If iscsi_tcp partially sends a header, it would recalculate the header size and readd the size of the digest (if header digests are used).This would cause us to send sizeof(digest) extra bytes when we sent the rest of the header. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
The attached patches add sysfs files for the chap settings to the iscsi transport class, iscsi_tcp and ib_iser. This is needed for software iscsi because there are times when iscsid can die and it will need to reread the values it was using. And it is needed by qla4xxx for basic management opertaions. This patch does not hook in qla4xxx yet, because I am not sure the mbx command to use. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
- Remove shadow of request length from struct iscsi_cmd_task. - change all users to use scsi_cmnd->request_bufflen directly (With bidi we will use scsi-ml API to retrieve in/out length) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch fixes handling of expected datasn/r2tsn as received from target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing. . unify expected datasn/r2tsn into one counter . calculate than check expected datasn/r2tsn. On error print a message and fail the request. (TODO use iscsi retransmits) . remove the FIXME ;) . avoid zero length memset Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
For iscsi root boot, software iscsi needs to know what the BIOS/OF initiator used for the initiator name so this puts it in sysfs for userspace to be able to pick up. For hw iscsi, it is nice to see what the card is using. This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
iscsid and udev need to key off the hw address being used so add some helpers for iser and iscsi tcp. Also convert them Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 12 3月, 2007 3 次提交
-
-
由 Mike Christie 提交于
People do not read the README and seem to like to unselect the crc32c module even though iscsi_tcp selects it for them. This patch spits a error that tells the user that they really do need the module. Hopefully, we will get fewer people asking about this now. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
For a while now, the block layer has seperated max sectors and max hw sectors. Software iscsi has no limit so this patch increases max hw sectors, so we can support large pass through commands. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch renames DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH to avoid confusion with the drivers default values (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH is the iscsi RFC specific default). Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 10 2月, 2007 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 1月, 2007 3 次提交
-
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Akinobu Mita 提交于
The return value of crypto_alloc_hash() should be checked by IS_ERR(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Arne Redlich 提交于
The transition from crypto_digest_*() to the crypto_hash_*() family introduced a bug into the data digest calculation: crypto_hash_update() is called with the number of S/G elements instead of the S/G lists data size. Signed-off-by: NArne Redlich <arne.redlich@xiranet.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 10 11月, 2006 2 次提交
-
-
由 Mike Christie 提交于
XMSTATE_SOL_HDR could be set when the xmit thread tests it, but there may not be anything on the r2tqueue yet. Move the XMSTATE_SOL_HDR set before the addition to the queue to make sure that when we pull something off it it is valid. This does not add locks around the xmstate test or make that a atmoic_t because this is a fast path and if it is set when we test it we can handle it there without the overhead. Later on we check the xmitqueue for all requests with the session lock so we will not miss it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Pete Wyckoff 提交于
Unconditionally free crypto state, as it is always allocated during TCP connection creation. Without this, crypto structures leak and crc32c module refcounts grow as connections are created and destroyed. Signed-off-by: NPete Wyckoff <pw@osc.edu> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
- 21 9月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
This patch converts ISCSI to use the new crypto_hash interface instead of crypto_digest. It's a fairly straightforward substitution. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 03 9月, 2006 4 次提交
-
-
由 Mike Christie 提交于
When a digest is spread across two network buffers, we currently ignore this and try to check the digest with the partial buffer. Or course this fails. This patch has use iscsi_tcp_copy to copy the whole digest before testing it. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
When we relogin to a target, we have not yet negotiated digests so we must reset the hdr_size var. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
This patch built over the last ones fixes a bug in the partial header resend code, where we add on another 4 bytes to the send length on the resend. We want just the header plus digest. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Christie 提交于
We currently allocated seperate tfms for data and header digests. There is no reason for this since we can never calculate a rx header and digest at the same time. Same for sends. So this patch removes the data tfms and has the send and recv sides use the rx_tfm or tx_tfm. I also made the connection creation code preallocate the tfms because I thought I hit a bug where I changed the digests settings during a relogin but could not allocate the tfm and then we just failed. Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-