bgmac_open() calls phy_start() to initialize the PHY state machine,
which will set the interface's carrier state accordingly, no need to
force that as this could be conflicting with the PHY state determined by
PHYLIB.

Fixes: dd4544f0 ("bgmac: driver for GBit MAC core on BCMA bus")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver does not start the transmit queue in bgmac_open(). If the
queue was stopped prior to closing then re-opening the interface, we
would never be able to wake-up again.

Fixes: dd4544f0 ("bgmac: driver for GBit MAC core on BCMA bus")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are checking for the Start of Frame bit in the ctl1 word, while this
bit is set in the ctl0 word instead. Read the ctl0 word and update the
check to verify that.

Fixes: 9cde9450 ("bgmac: implement scatter/gather support")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 7bb11dc9 ("bonding: unify all places where
actor-oper key needs to be updated."), the logic in bonding to handle
selection between multiple aggregators has not functioned.

	This affects only configurations wherein the bonding slaves
connect to two discrete aggregators (e.g., two independent switches, each
with LACP enabled), thus creating two separate aggregation groups within a
single bond.

	The cause is a change in 7bb11dc9 to no longer set
AD_PORT_BEGIN on a port after a link state change, which would cause the
port to be reselected for attachment to an aggregator as if were newly
added to the bond.  We cannot restore the prior behavior, as it
contradicts IEEE 802.1AX 5.4.12, which requires ports that "become
inoperable" (lose carrier, setting port_enabled=false as per 802.1AX
5.4.7) to remain selected (i.e., assigned to the aggregator).  As the port
now remains selected, the aggregator selection logic is not invoked.

	A side effect of this change is that aggregators in bonding will
now contain ports that are link down.  The aggregator selection logic
does not currently handle this situation correctly, causing incorrect
aggregator selection.

	This patch makes two changes to repair the aggregator selection
logic in bonding to function as documented and within the confines of the
standard:

	First, the aggregator selection and related logic now utilizes the
number of active ports per aggregator, not the number of selected ports
(as some selected ports may be down).  The ad_select "bandwidth" and
"count" options only consider ports that are link up.

	Second, on any carrier state change of any slave, the aggregator
selection logic is explicitly called to insure the correct aggregator is
active.
Reported-by: NVeli-Matti Lintu <veli-matti.lintu@opinsys.fi>
Fixes: 7bb11dc9 ("bonding: unify all places where actor-oper key needs to be updated.")
Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By default, mdiobus_alloc() sets the PHYs to polling mode, but a
pointer size memcpy means that a couple IRQs end up being overwritten
with a value of 0. This means that PHY_POLL is disabled and results
in unpredictable behavior depending on the PHY's location on the
MDIO bus. Remove that memcpy and the now unused phy_irq member to
force the SMSC911x PHYs into polling mode 100% of the time.

Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core")
Signed-off-by: NJeremy Linton <jeremy.linton@arm.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tx errors present summation of errors encountered while transmitting
packets.
Signed-off-by: NHaishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The assignment of rth->dst.output in vrf_rt6_create() and
vrf_rtable_create() used a hard tab before the '='. The neighboring
assignments did not. Make the assignment of rth->dst.output consistent
with the surrounding code.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI
Express 2xHS and USBcan Light 2xHS.
Signed-off-by: NJimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

For 'real' hardware CAN devices the netlink interface is used to set CAN
specific communication parameters. Real CAN hardware can not be created nor
removed with the ip tool ...

This patch adds a private dellink function for the CAN device driver interface
that does just nothing.

It's a follow up to commit 993e6f2f ("can: fix oops caused by wrong rtnl
newlink usage") but for dellink.
Reported-by: Najneu <ajneu1@gmail.com>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

With upstream commit bb208f14 (can: fix handling of unmodifiable
configuration options) a new can_validate() function was introduced.

When invoking 'ip link set can0 type can' without any configuration data
can_validate() tries to validate the content without taking into account that
there's totally no content. This patch adds a check for missing content.
Reported-by: Najneu <ajneu1@gmail.com>
Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

This allows a clean shutdown, even if some netdev clients do not
release their reference from this netdev. It is enough to release
the HW resources only as the kernel is shutting down.

Fixes: 2ba5fbd6 ('net/mlx4_core: Handle AER flow properly')
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of
failure.

Fixes: 8e586137 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value')
Signed-off-by: NKamal Heib <kamalh@mellanox.com>
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the
source device to be locked by netif_addr_lock_bh(), but this is missing
in team's enslave function, so add it.

This fixes the following lockdep warning:

Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(_xmit_ETHER/1);
                                local_irq_disable();
                                lock(&(&mc->mca_lock)->rlock);
                                lock(&team_netdev_addr_lock_key);
   <Interrupt>
     lock(&(&mc->mca_lock)->rlock);

  *** DEADLOCK ***

Fixes: cb41c997 ("team: team should sync the port's uc/mc addrs when add a port")
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patchs adds basic support for the bytewerk.org candleLight interface,
a open hardware (CERN OHL) USB CAN adapter.
Signed-off-by: NHubert Denkmair <hubert@denkmair.de>
Signed-off-by: NMaximilian Schneider <max@schneidersoft.net>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

At high bus load it could happen that "at91_poll()" enters with all RX
message boxes filled up. If then at the end the "quota" is exceeded as
well, "rx_next" will not be reset to the first RX mailbox and hence the
interrupts remain disabled.
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
Tested-by: NAmr Bekhit <amrbekhit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

When testing CAN write floods on Altera's CycloneV, the first 2 bytes
are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also
observed bytes 4 & 5 were corrupted in some cases.

The D_CAN Data registers are 32 bits and changing from 16 bit writes to
32 bit writes fixes the problem.

Testing performed on Altera CycloneV (D_CAN).  Requesting tests on other
C_CAN & D_CAN platforms.
Reported-by: NRichard Andrysek <richard.andrysek@gomtec.de>
Signed-off-by: NThor Thayer <tthayer@opensource.altera.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

The 'MODULE_FIBER' value replaced several other FIBER values
in newer management firmware images, so existing code would
fail to properly reflect its mode.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver has 2 sets of entries for handling ramrod configurations
toward firmware - a regular pre-allocated set of entires and a
possible 'unlimited' list of additional pending entries.

In most scenarios the 'unlimited' list would not be used, but
when it does the handling of the ramrod completion doesn't
properly handle the release of the entry.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several user APIs can cause driver to perform an inner-reload.
Currently, doing this would cause the HW/FW statistics of the
adapter to reset, which isn't the expected behavior [statistics
should only reset on explicit unloads].
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Internal loopback in driver is based on two things - first
is the willingness of transmitter to use it [in case of VFs,
this can be forced based on VEPA/VEB] and secondly on another
vport classification configuration which should match the
packet's destination.

Current code allows non-linux VFs to configure a 'promisc'
mode on Tx, meaning all traffic sent by VF would be loopbacked
internally by firmware; This isn't considered a valid mode and
as such should be prevented by PF.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When no vlan filter is configured, firmware has a configurable
default on whether to pass only untagged packets or all packets
regardless of their tagging. Driver currently doesn't set this
field in the necessary ramrod, causing the default to always be
'receive all'.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The conversion to the 64-bit time based ptp methods left two instances
of 'struct timespec' in place. This is harmless because 64-bit
architectures define timespec64 as timespec, and this driver is
not used on 32-bit machines.

However, using 'struct timespec64' directly is obviously the right
thing to do, and will help us remove 'struct timespec' in the future.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: b9acf24f ("ptp: tilegx: convert to the 64 bit get/set time methods.")
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stop the SW TX counter from counting the TX header bytes
since they are not being sent out.

Fixes: e577516b ("mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmit")
Signed-off-by: NNogah Frankel <nogahf@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stop the SW TX counter from counting the TX header bytes
since they are not being sent out.

Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NNogah Frankel <nogahf@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We were using an incorrect define to get the irq vector number.
NFP_NET_CFG_LSC is a control BAR offset, LSC interrupt vector
index is called NFP_NET_IRQ_LSC_IDX.  For machines with less
than 30 CPUs this meant that we were disabling/enabling IRQ 0.
For bigger hosts we were just playing with the 31st RX/TX
interrupt.

Fixes: 0ba40af9 ("nfp: move link state interrupt request/free calls")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mlx4e driver does not support more than one port for VXLAN offload.  As
such expecting the hardware to offload other ports is invalid since it
appears the parsing logic is used to perform Tx checksum and segmentation
offloads.  Use the vxlan_port number to determine in which cases we can
apply the offload and in which cases we can not.
Signed-off-by: NAlexander Duyck <aduyck@mirantis.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When building with -Wextra, we get a harmless warning from the
EFX_EXTRACT_OWORD32 macro:

ethernet/sfc/farch.c: In function 'efx_farch_test_registers':
ethernet/sfc/farch.c:119:30: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
ethernet/sfc/farch.c:124:144: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
ethernet/sfc/farch.c:124:392: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
ethernet/sfc/farch.c:124:731: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]

The macro and the caller are both correct, but we can avoid the
warning by changing the index variable to a signed type.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NBert Kenward <bkenward@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

path_b_ok is being assigned but immediately after path_a_ok is being
compared to the value 0x03.  This appears to be a typo on the
variable name, compare path_b_ok instead.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

The rx early size should be

	(agg_buf_sz - packet size) / 8
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reset the BMU to clear the rx/tx fifo. This avoids that the unexpected
data remains in the hw.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Disable MAC clock speed down. It may casue the first control
transfer to contain the wrong data, when the power state change
from U1 to U0.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The skfp driver has been moved to drivers/net/fddi/skfp a long time
ago, but we still attempt to include headers from the old location,
which causes a warning when building with W=1:

cc1: error: /git/arm-soc/drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs]
cc1: error: drivers/net/skfp: No such file or directory [-Werror=missing-include-dirs]

Clearly this include directive is not needed any more, so we can
just remove it now.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ASYNC flag prevents initialization on some physical machines.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the crypto callbacks to work properly, we cannot have sg and iv on
the stack.  Use kmalloc instead, with a single allocation for
aead_request + scatterlist + iv.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this, the various uses of call_rcu could cause a kernel panic.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Maciej Żenczykowski reported lockdep warning a spinlock
was not registered before being held in mlx4_cmd_wake_completions()

cmd.context_lock initialization is not at the right place.

1) mlx4_cmd_use_events() can be called multiple times.
   Calling spin_lock_init() on a live spinlock can lead
   to hangs.

2) mlx4_cmd_wake_completions() can be called while lock
   has not been initialized.
   Lockdep complains, and current logic is not race prone.

It seems better to move the initialization earlier in
mlx4_load_one()
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NMaciej Żenczykowski <maze@google.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function geneve_dev_create_fb() (only used by ovs) never calls
rtnl_configure_link(). The consequence is that dev->rtnl_link_state is
never set to RTNL_LINK_INITIALIZED.
During the deletion phase, the function rollback_registered_many() sends
a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED.

Fixes: e305ac6c ("geneve: Add support to collect tunnel metadata.")
CC: Pravin B Shelar <pshelar@nicira.com>
CC: Jesse Gross <jesse@nicira.com>
CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function vxlan_dev_create() (only used by ovs) never calls
rtnl_configure_link(). The consequence is that dev->rtnl_link_state is
never set to RTNL_LINK_INITIALIZED.
During the deletion phase, the function rollback_registered_many() sends
a RTM_DELLINK only if dev->rtnl_link_state is set to RTNL_LINK_INITIALIZED.

Note that the function vxlan_dev_create() is moved after the rtnl stuff so
that vxlan_dellink() can be called in this function.

Fixes: dcc38c03 ("openvswitch: Re-add CONFIG_OPENVSWITCH_VXLAN")
CC: Thomas Graf <tgraf@suug.ch>
CC: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After ipgre_newlink()/geneve_configure() call, the netdev is registered.

Fixes: 7e059158 ("vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices")
CC: David Wragg <david@weave.works>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 26c5f03b uses a new skb allocator to avoid the RFD overflow
issue.

But from debugging without datasheet, we found the error always
happen when the DMA RX address is set to 0x....fc0, which is very
likely to be a HW/silicon problem.

So one idea is instead of adding a new allocator, why not just
hitting the right target by avaiding the error-prone DMA address?

This patch will actually
* Remove the commit 26c5f03b
* Apply rx skb with 64 bytes longer space, and if the allocated skb
  has a 0x...fc0 address, it will use skb_resever(skb, 64) to
  advance the address, so that the RX overflow can be avoided.

In theory this method should also apply to atl1c driver, which
I can't find anyone who can help to test on real devices.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761Signed-off-by: NFeng Tang <feng.tang@intel.com>
Suggested-by: NEric Dumazet <edumazet@google.com>
Tested-by: NOle Lukoie <olelukoie@mail.ru>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>