The error handling paths in mthca_tavor_post_srq_recv() and
mthca_arbel_post_srq_recv() are quite bogus, the result of a
screwed up merge.  Fix them so they work as intended.

Pointed out by Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

In mthca_create_eq(), we call get_eqe() before setting eq->nent.  This
is wrong, because get_eqe() uses eq->nent.  Fix this, and clean up the
code a little while we're at it.  (We got lucky with the current code,
because eq->nent was cleared to 0, which get_eqe() made happen to do
the right thing)

Pointed out by Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

We got a little mixed up with what the backoff member holds in the
IPoIB multicast group structure: sometimes it was used as a number of
seconds, and sometimes it was used as a number of jiffies.  Fix the
code so that backoff is always in seconds.
Signed-off-by: NHal Rosenstock <halr@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix posting first WQE for mem-free HCAs: we need to link to previous
WQE even in that case.  While we're at it, simplify code for
Tavor-mode HCAs.  We don't really need the conditional test there
either; we can similarly always link to the previous WQE.

Based on Michael S. Tsirkin's analogous fix for userspace libmthca.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The hardware reads the ACK timeout field from the most significant 5
bits of struct mthca_qp_path's ackto field, not the least significant
bits.  This fix has the driver put the timeout in the right place.
Without this, we get a timeout that is 2^8 times too small.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Since ipoib uses queue_delayed_work to run flush task on port state events,
it must flush scheduled work after unregistering the event handler.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fix:

arch/arm/mach-sa1100/generic.c:224: warning: 'struct mcp_plat_data' declared inside parameter list

caused by mussing structure and function declaration.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Newer binutils complains:
/tmp/cc07pbI9.s:146: Warning: ignoring changed section type for .sched.text

Fix this warning by adding %progbits to the .section.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

Building a kernel for IXDP425 currently includes the machine descriptors
for IXDP465 and PRPMC1100 even if those machines are not configured.
This means we can build a kernel that boots on those machines even
though the machine_is_xxx() macro will always return 0 and other bits
such as PCI won't be compiled in. This can lead to many wasted hours
wondering what you have done to your kernel to make it randomly crash
thus requireing large quantities of beer to be consumed. While I am
all for consumption of large quantities of beer, there are better
reasons to do so then stupid kernel bugs.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The recently added futex.h contains an unused variable, which gcc
naturally warns about.  Remove this unused variable.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As suggested by Roman Zippel.
Signed-off-by: NHarald Welte <laforge@netfilter.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I think we should cache the per-socket route(dst_entry) only when the
IPv6 UDP socket is connect(2)'ed.
(which is same as IPv4 UDP send behavior)
Signed-off-by: NMitsuru KANDA <mk@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Florin Malita <fmalita@gmail.com>

bond_init() is not releasing rtnl_sem after register_netdevice() and before
calling unregister_netdevice() (from bond_free_all()) in the exception
path.  As the device registration is not completed (dev->reg_state ==
NETREG_REGISTERING), the call to unregister_netdevice() triggers
BUG_ON(dev->reg_state != NETREG_REGISTERED).
Signed-off-by: NFlorin Malita <fmalita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allocation for the optnames is similar to the DCCP options, with a
range for rx and tx half connection CCIDs.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moving the TFRC sender and receiver variables to separate structs, so
that we can copy these structs to userspace thru getsockopt,
dccp_diag, etc.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Isolating it, that will be used when we introduce a CCID2 (TCP-Like)
implementation.
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They seem to have been due to AMD errata 63/122; the fix is to disable
TLB flush filtering in SMP configurations.

Confirmed to fix the problem by Andrew Walrond <andrew@walrond.org>

[ Let's see if we'll have a better fix eventually, this is the Q&D
  "let's get this fixed and out there" version ]
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The old driver was not fully adapted to new USB ABI and does not
work.
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using
pci_bus_{read,write}_config_dword().  A recent audit of drivers/ turned up
several cases of byte- and word-sized accesses.  The harmful ones were fixed
by Linus directly.  This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.
Signed-off-by: NAdam Kropelin <akropel1@rochester.rr.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using
pci_bus_{read,write}_config_dword().  A recent audit of drivers/ turned up
several cases of byte- and word-sized accesses.  The harmful ones were fixed
by Linus directly.  This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.
Signed-off-by: NAdam Kropelin <akropel1@rochester.rr.com>
Cc: <kristen.c.accardi@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed
using pci_bus_{read,write}_config_dword(). A recent audit of drivers/
turned up several cases of byte- and word-sized accesses. The harmful
ones were fixed by Linus directly. This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.
Signed-off-by: NAdam Kropelin <akropel1@rochester.rr.com>
Cc: <kristen.c.accardi@intel.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

PCI_ROM_ADDRESS is a 32 bit register and as such should be accessed using
pci_bus_{read,write}_config_dword().  A recent audit of drivers/ turned up
several cases of byte- and word-sized accesses.  The harmful ones were fixed
by Linus directly.  This patches up one of the remaining
harmless-but-still-wrong cases caught in the dragnet.
Signed-off-by: NAdam Kropelin <akropel1@rochester.rr.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When doing ioctl HDIO_DRIVE_TASKFILE, the ide_task_t's request pointer is
never set, but flagged_taskfile and do_rw_taskfile pass it as a parameter
to the prehandler.  The kernel will oops taskfile pio-out commands because
of this (taskfile pio-in doesn't use a prehandler).  This fix sets the
request pointer at the time the request is created to stop this oops.
Signed-off-by: NTimothy Thelin <timothy.thelin@wdc.com>
Cc: "Bartlomiej Zolnierkiewicz" <bzolnier@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here's the patch from

http://bugzilla.kernel.org/show_bug.cgi?id=4853

It is a feeble attempt at fixing the request handling in pf, it is totally
foobar right now.
Signed-off-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes miss-sync issue on write() system call.  This updates
inode attrs flags, mtime and ctime on every comit_write call, due to
locking.
Signed-off-by: NHiroyuki Machida <machida@sm.sony.co.jp>
Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With the new fdtable locking rules, you have to protect fdtable with either
->file_lock or rcu_read_lock/unlock().  There are some places where we
aren't doing either.  This patch fixes those places.
Signed-off-by: NDipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a new chapter on memory allocation to
Documentation/CodingStyle.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix http://bugzilla.kernel.org/show_bug.cgi?id=5241

2.6.13 broke compilation of the xorg tree, which apprarently insists on
including that file.

Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add smp_mb__after_clear_bit() to unlock_kiocb()

AIO's use of wait_on_bit_lock()/wake_up_bit() forgot to add a barrier
between clearing its lock bit and calling wake_up_bit() so wake_up_bit()'s
unlocked waitqueue_active() can race.  This puts AIO's use in line with the
others and the comment above wake_up_bit().
Signed-off-by: NZach Brown <zach.brown@oracle.com>
Acked-by: NBenjamin LaHaise <bcrl@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kill an unused member of the i2c_adapter structure.  This additionally
fixes a potential bug, because <linux/i2c.h> doesn't include
<linux/config.h>, so different files including <linux/i2c.h> could see a
different definition of the i2c_adapter structure, depending on them
including <linux/config.h> (or other header files themselves including
<linux/config.h>) before <linux/i2c.h>, or not.

Credits go to Jörn Engel for pointing me to the problem.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

- Remove the relative input device
- Add an absolute input device
- Misc. cleanup and bug fixing

The patch is sizable due to the cleanup from removing the relative input
device (net -112 lines).
Signed-off-by: NRobert Love <rml@novell.com>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Al found a potential problem in epoll_create(), where the
file->private_data member was set after fd_install().  This is obviously
wrong since another thread might do a close() on that fd# before we set the
file->private_data member.  This goes over 2.6.13 and passes a few basic
tests I've done here.

(akpm: snuck in a kzalloc() cleanup too)
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Whitespace standardisation.

Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

BUG fixes:

  The driver used to allocate memory with spinlock held which has been
  fixed in this patch.

  The driver was printing the entire buffer when it received a invalid
  entry in image_type.  The fix is to only print a warning message and not
  the buffer.

Usability enhancements:

  It is possible that due to user error the /sys/class/firmware/dell_rbu
  entries might be missing, this can happen if the user does the following

	echo 1 > /sys/class/firmware/dell_rbu/loading
	echo 0 > /sys/class/firmware/dell_rbu/loading

  This will make the entries in /sys/class/firmware/ to disappear and the
  only way get them back was bby unloading and loading the driver.

  This patch makes the user recreate these entries by echoing init in to
  image_type.

This patch has been tested with Libsmbios and Dell OpenManage.
Signed-off-by: NAbhay Salunke <Abhay_Salunke@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using native cmpxchg offers a slight performance improvement in uml/i386.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one
version of this patch can be found here
http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ).

This patch also made corresponding changes in kernel/sys.c to change the
prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was
modified from 0..1 to 0..2.

However, a corresponding change was not made for PR_GET_DUMPABLE: if the
dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that
the caller can't determine the true setting of this flag.
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Small typo in relayfs documentation.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>