There is really no need to page align sha1_transform_avx2. The default
alignment is just fine. This is not the hot code but only the entry
point, after all.

Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Reviewed-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The AVX2 implementation might waste up to a page of stack memory because
of a wrong alignment calculation. This will, in the worst case, increase
the stack usage of sha1_transform_avx2() alone to 5.4 kB -- way to big
for a kernel function. Even worse, it might also allocate *less* bytes
than needed if the stack pointer is already aligned bacause in that case
the 'sub %rbx, %rsp' is effectively moving the stack pointer upwards,
not downwards.

Fix those issues by changing and simplifying the alignment calculation
to use a 32 byte alignment, the alignment really needed.

Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Reviewed-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 7c1da8d0 "crypto: sha - SHA1 transform x86_64 AVX2"
accidentally disabled the AVX variant by making the avx_usable() test
not only fail in case the CPU doesn't support AVX or OSXSAVE but also
if it doesn't support AVX2.

Fix that regression by splitting up the AVX/AVX2 test into two
functions. Also test for the BMI1 extension in the avx2_usable() test
as the AVX2 implementation not only makes use of BMI2 but also BMI1
instructions.

Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Reviewed-by: NH. Peter Anvin <hpa@linux.intel.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This git patch adds x86_64 AVX2 optimization of SHA1
transform to crypto support. The patch has been tested with 3.14.0-rc1
kernel.

On a Haswell desktop, with turbo disabled and all cpus running
at maximum frequency, tcrypt shows AVX2 performance improvement
from 3% for 256 bytes update to 16% for 1024 bytes update over
AVX implementation.

This patch adds sha1_avx2_transform(), the glue, build and
configuration changes needed for AVX2 optimization of
SHA1 transform to crypto support.

sha1-ssse3 is one module which adds the necessary optimization
support (SSSE3/AVX/AVX2) for the low-level SHA1 transform function.
With better optimization support, transform function is overridden
as the case may be. In the case of AVX2, due to performance reasons
across datablock sizes, the AVX or AVX2 transform function is used
at run-time as it suits best. The Makefile change therefore appends
the necessary objects to the linkage. Due to this, the patch merely
appends AVX2 transform to the existing build mix and Kconfig support
and leaves the configuration build support as is.
Signed-off-by: NChandramouli Narayanan <mouli@linux.intel.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The crypto algorithm modules utilizing the crypto daemon could
be used early when the system start up.  Using module_init
does not guarantee that the daemon's work queue is initialized
when the cypto alorithm depending on crypto_wq starts.  It is necessary
to initialize the crypto work queue earlier at the subsystem
init time to make sure that it is initialized
when used.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

(struct caam_ctx) ctx->key_dma needs to be unmapped
when context is cleaned up.
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the following combinations:
-encryption: null
-authentication: md5, sha* (1, 224, 256, 384, 512)
Signed-off-by: NTudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add test vectors for aead with null encryption and md5,
respectively sha1 authentication.
Input data is taken from test vectors listed in RFC2410.
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

These defines might be needed by crypto drivers.
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Commit 61bb86bb
("crypto: caam - set descriptor sharing type to SERIAL")
changed the descriptor sharing mode from SHARE_WAIT to SHARE_SERIAL.

All descriptor commands that handle the "ok to share" and
"error propagation" settings should also go away, since they have no
meaning for SHARE_SERIAL.
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The ahash_def_finup() can make use of the request save/restore functions,
thus make it so. This simplifies the code a little and unifies the code
paths.

Note that the same remark about free()ing the req->priv applies here, the
req->priv can only be free()'d after the original request was restored.

Finally, squash a bug in the invocation of completion in the ASYNC path.
In both ahash_def_finup_done{1,2}, the function areq->base.complete(X, err);
was called with X=areq->base.data . This is incorrect , as X=&areq->base
is the correct value. By analysis of the data structures, we see the areq is
of type 'struct ahash_request' , areq->base is of type 'struct crypto_async_request'
and areq->base.completion is of type crypto_completion_t, which is defined in
include/linux/crypto.h as:

  typedef void (*crypto_completion_t)(struct crypto_async_request *req, int err);

This is one lead that the X should be &areq->base . Next up, we can inspect
other code which calls the completion callback to give us kind-of statistical
idea of how this callback is used. We can try:

  $ git grep base\.complete\( drivers/crypto/

Finally, by inspecting ahash_request_set_callback() implementation defined
in include/crypto/hash.h , we observe that the .data entry of 'struct
crypto_async_request' is intended for arbitrary data, not for completion
argument.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The functions to save original request within a newly adjusted request
and it's counterpart to restore the original request can be re-used by
more code in the crypto/ahash.c file. Pull these functions out from the
code so they're available.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add documentation for the pointer voodoo that is happening in crypto/ahash.c
in ahash_op_unaligned(). This code is quite confusing, so add a beefy chunk
of documentation.

Moreover, make sure the mangled request is completely restored after finishing
this unaligned operation. This means restoring all of .result, .base.data
and .base.complete .

Also, remove the crypto_completion_t complete = ... line present in the
ahash_op_unaligned_done() function. This type actually declares a function
pointer, which is very confusing.

Finally, yet very important nonetheless, make sure the req->priv is free()'d
only after the original request is restored in ahash_op_unaligned_done().
The req->priv data must not be free()'d before that in ahash_op_unaligned_finish(),
since we would be accessing previously free()'d data in ahash_op_unaligned_done()
and cause corruption.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Found by the kbuild test robot, the first argument to caam_init_rng
has a spurious ampersand.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HIGHMEM pages may not be mapped so we must kmap them before accessing.
This resolves a random OOPs error that was showing up during OpenSSL SHA tests.
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch allocates memory from DMAable region to the caam_rng_ctx object,
earlier it had been statically allocated which resulted in errorneous
behaviour on inserting the caamrng module at the runtime.
Signed-off-by: NNitesh Lal <NiteshNarayanLal@freescale.com>
Acked-by: NRuchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This adds the function blkcipher_aead_walk_virt_block, which allows the caller
to use the blkcipher walk API to handle the input and output scatterlists.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to allow other uses of the blkcipher walk API than the blkcipher
algos themselves, this patch copies some of the transform data members to the
walk struct so the transform is only accessed at walk init time.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When bringing a new RNG source online, it seems like it would make sense
to use some of its bytes to make the system entropy pool more random,
as done with all sorts of other devices that contain per-device or
per-boot differences.
Signed-off-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NJason Cooper <jason@lakedaemon.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Optimize the hashing operation in the MXS-DCP by doing two adjustments:
1) Given that the output buffer for the hash is now always correctly aligned,
   we can just use the buffer for the DCP DMA to store the resulting hash.
   We thus get rid of one copying of data. Moreover, we remove an entry from
   dcp_coherent_block{} and thus lower the memory footprint of the driver.
2) We map the output buffer for the hash for DMA only in case we will output
   the hash, not always, as it was now.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The DCP needs the bounce buffers, DMA descriptors and result buffers aligned
to 64 bytes (yet another hardware limitation). Make sure they are aligned by
properly aligning the structure which contains them during allocation.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Make omap_des_copy_needed(), omap_des_copy_sgs(), because these
functions are used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use SIMPLE_DEV_PM_OPS macro in order to make the code simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_*() functions to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use devm_clk_get() to make cleanup paths simpler.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NPeter Korsgaard <peter@korsgaard.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

1) SSYNC instruction is blackfin specific and takes no effect in this driver.
2) DMA descriptor and SG middle buffer are in DMA coherent memory. No need
to flush.
3) Turn kzalloc, ioremap and request_irq into managed device APIs respectively.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the crypto layer is able to queue up a command for processing
by the CCP on the initial call to ccp_crypto_enqueue_request and
the CCP returns -EBUSY, then if the backlog flag is not set the
command needs to be freed and not added to the active command list.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Invoke the callback routine associated with the crypto context
if an error is encountered sending the command to the CCP during
backlog processing.  This is needed to free any resources used
by the command.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If a CCP command has been queued for processing at the
crypto layer then, when dequeueing it for processing, the
"can backlog" flag must be set so that the request isn't
lost if the CCP backlog queue limit is reached.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

My guess is that this little endian configuration is never found in real
life, but if it were then the writel() arguments are in the wrong order
so the driver would crash immediately.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This driver has never been hooked up in any board file, and cannot be
instantiated via device tree. I've been told that, at least on Tegra20,
the HW is slower at crypto than the main CPU. I have no test-case for
it. Hence, remove it.

Cc: Varun Wadekar <vwadekar@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add config and build options for the omap-des driver.
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add omap-des driver with platform data for OMAP4/AM43xx. Support added for DES
ECB and CBC modes. Also add support for 3DES operation where 3 64-bit keys are
used to perform a DES encrypt-decrypt-encrypt (des3_ede) operation on a buffer.

Tests have been conducted with the CRYPTO test manager, and functionality is
verified at different page length alignments.
Signed-off-by: NJoel Fernandes <joelf@ti.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We should test the error case for each platform_get_irq() assignment and
propagate the error accordingly.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>