Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 4月, 2015 3 次提交
  3. 17 2月, 2015 2 次提交
  5. 19 12月, 2014 1 次提交
    • J
      ocfs2: fix journal commit deadlock · 136f49b9
      由 Junxiao Bi 提交于 
      For buffer write, page lock will be got in write_begin and released in
write_end, in ocfs2_write_end_nolock(), before it unlock the page in
ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask
for the read lock of journal->j_trans_barrier.  Holding page lock and
ask for journal->j_trans_barrier breaks the locking order.

This will cause a deadlock with journal commit threads, ocfs2cmt will
get write lock of journal->j_trans_barrier first, then it wakes up
kjournald2 to do the commit work, at last it waits until done.  To
commit journal, kjournald2 needs flushing data first, it needs get the
cache page lock.

Since some ocfs2 cluster locks are holding by write process, this
deadlock may hung the whole cluster.

unlock pages before ocfs2_run_deallocs() can fix the locking order, also
put unlock before ocfs2_commit_trans() to make page lock is unlocked
before j_trans_barrier to preserve unlocking order.
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NMark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      136f49b9
  7. 11 12月, 2014 1 次提交
  9. 10 10月, 2014 1 次提交
    • J
      ocfs2: fix deadlock due to wrong locking order · f775da2f
      由 Junxiao Bi 提交于 
      For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex
osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it
will wait until jbd2 commit thread done. In order journal mode, jbd2
needs flushing dirty data pages first, and this needs get page lock.
So osb->journal->j_trans_barrier should be got before page lock.

But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this
locking order, and this will cause deadlock and hung the whole cluster.

One deadlock catched is the following:

PID: 13449  TASK: ffff8802e2f08180  CPU: 31  COMMAND: "oracle"
 #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524
 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf
 #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85
 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55
 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4
 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2]
 #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2]
 #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2]
 #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2]
 #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2]
 #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2]
 #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2]
 #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29
 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1
 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd
 #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142
    RIP: 00007f8de750c6f7  RSP: 00007fffe786e478  RFLAGS: 00000206
    RAX: 000000000000004d  RBX: ffffffff81515142  RCX: 0000000000000000
    RDX: 0000000000000200  RSI: 0000000000028400  RDI: 000000000000000d
    RBP: 00007fffe786e040   R8: 0000000000000000   R9: 000000000000000d
    R10: 0000000000000000  R11: 0000000000000206  R12: 000000000000000d
    R13: 00007fffe786e710  R14: 00007f8de70f8340  R15: 0000000000028400
    ORIG_RAX: 000000000000004d  CS: 0033  SS: 002b

crash64> bt
PID: 7610   TASK: ffff88100fd56140  CPU: 1   COMMAND: "ocfs2cmt"
 #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524
 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf
 #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2]
 #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2]
 #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2]
 #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2]
 #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6
 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284

crash64> bt
PID: 7609   TASK: ffff88100f2d4480  CPU: 0   COMMAND: "jbd2/dm-20-86"
 #0 [ffff88100def3920] __schedule at ffffffff8150a524
 #1 [ffff88100def39c8] schedule at ffffffff8150acbf
 #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c
 #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e
 #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a
 #5 [ffff88100def3a58] __lock_page at ffffffff81110687
 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752
 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901
 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2]
 #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2]
 #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2]
 #11 [ffff88100def3ee8] kthread at ffffffff81090db6
 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284
Signed-off-by: NJunxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Alex Chen <alex.chen@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      f775da2f
  11. 07 5月, 2014 2 次提交
  13. 04 4月, 2014 2 次提交
  15. 13 11月, 2013 4 次提交
  17. 12 9月, 2013 1 次提交
  19. 04 9月, 2013 1 次提交
    • C
      direct-io: Implement generic deferred AIO completions · 7b7a8665
      由 Christoph Hellwig 提交于 
      Add support to the core direct-io code to defer AIO completions to user
context using a workqueue.  This replaces opencoded and less efficient
code in XFS and ext4 (we save a memory allocation for each direct IO)
and will be needed to properly support O_(D)SYNC for AIO.

The communication between the filesystem and the direct I/O code requires
a new buffer head flag, which is a bit ugly but not avoidable until the
direct I/O code stops abusing the buffer_head structure for communicating
with the filesystems.

Currently this creates a per-superblock unbound workqueue for these
completions, which is taken from an earlier patch by Jan Kara.  I'm
not really convinced about this use and would prefer a "normal" global
workqueue with a high concurrency limit, but this needs further discussion.

JK: Fixed ext4 part, dynamic allocation of the workqueue.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      7b7a8665
  21. 14 8月, 2013 1 次提交
  23. 22 5月, 2013 3 次提交
    • L
      ocfs2: use ->invalidatepage() length argument · e5f8d30d
      由 Lukas Czerner 提交于 
      ->invalidatepage() aop now accepts range to invalidate so we can make
use of it in ocfs2_invalidatepage().
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: NJoel Becker <jlbec@evilplan.org>
      e5f8d30d
    • L
      jbd2: change jbd2_journal_invalidatepage to accept length · 259709b0
      由 Lukas Czerner 提交于 
      invalidatepage now accepts range to invalidate and there are two file
system using jbd2 also implementing punch hole feature which can benefit
from this. We need to implement the same thing for jbd2 layer in order to
allow those file system take benefit of this functionality.

This commit adds length argument to the jbd2_journal_invalidatepage()
and updates all instances in ext4 and ocfs2.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
      259709b0
    • L
      mm: change invalidatepage prototype to accept length · d47992f8
      由 Lukas Czerner 提交于 
      Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.

Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).

This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.

We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.

Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
      d47992f8
  25. 26 2月, 2013 1 次提交
  27. 23 2月, 2013 1 次提交
  29. 22 2月, 2013 1 次提交
  31. 20 3月, 2012 1 次提交
  33. 28 7月, 2011 2 次提交
    • J
      ocfs2: Avoid livelock in ocfs2_readpage() · c7e25e6e
      由 Jan Kara 提交于 
      When someone writes to an inode, readers accessing the same inode via
ocfs2_readpage() just busyloop trying to get ip_alloc_sem because
do_generic_file_read() looks up the page again and retries ->readpage()
when previous attempt failed with AOP_TRUNCATED_PAGE. When there are enough
readers, they can occupy all CPUs and in non-preempt kernel the system is
deadlocked because writer holding ip_alloc_sem is never run to release the
semaphore. Fix the problem by making reader block on ip_alloc_sem to break
the busy loop.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>
      c7e25e6e
    • M
      ocfs2: serialize unaligned aio · a11f7e63
      由 Mark Fasheh 提交于 
      Fix a corruption that can happen when we have (two or more) outstanding
aio's to an overlapping unaligned region.  Ext4
(e9e3bcec) and xfs recently had to fix
similar issues.

In our case what happens is that we can have an outstanding aio on a region
and if a write comes in with some bytes overlapping the original aio we may
decide to read that region into a page before continuing (typically because
of buffered-io fallback).  Since we have no ordering guarantees with the
aio, we can read stale or bad data into the page and then write it back out.

If the i/o is page and block aligned, then we avoid this issue as there
won't be any need to read data from disk.

I took the same approach as Eric in the ext4 patch and introduced some
serialization of unaligned async direct i/o.  I don't expect this to have an
effect on the most common cases of AIO.  Unaligned aio will be slower
though, but that's far more acceptable than data corruption.
Signed-off-by: NMark Fasheh <mfasheh@suse.com>
Signed-off-by: NJoel Becker <jlbec@evilplan.org>
      a11f7e63
  35. 25 7月, 2011 1 次提交
  37. 21 7月, 2011 3 次提交
    • C
      fs: move inode_dio_done to the end_io handler · 72c5052d
      由 Christoph Hellwig 提交于 
      For filesystems that delay their end_io processing we should keep our
i_dio_count until the the processing is done.  Enable this by moving
the inode_dio_done call to the end_io handler if one exist.  Note that
the actual move to the workqueue for ext4 and XFS is not done in
this patch yet, but left to the filesystem maintainers.  At least
for XFS it's not needed yet either as XFS has an internal equivalent
to i_dio_count.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      72c5052d
    • C
      fs: always maintain i_dio_count · df2d6f26
      由 Christoph Hellwig 提交于 
      Maintain i_dio_count for all filesystems, not just those using DIO_LOCKING.
This these filesystems to also protect truncate against direct I/O requests
by using common code.  Right now the only non-DIO_LOCKING filesystem that
appears to do so is XFS, which uses an opencoded variant of the i_dio_count
scheme.

Behaviour doesn't change for filesystems never calling inode_dio_wait.
For ext4 behaviour changes when using the dioread_nonlock option, which
previously was missing any protection between truncate and direct I/O reads.
For ocfs2 that handcrafted i_dio_count manipulations are replaced with
the common code now enable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      df2d6f26
    • C
      fs: kill i_alloc_sem · bd5fe6c5
      由 Christoph Hellwig 提交于 
      i_alloc_sem is a rather special rw_semaphore.  It's the last one that may
be released by a non-owner, and it's write side is always mirrored by
real exclusion.  It's intended use it to wait for all pending direct I/O
requests to finish before starting a truncate.

Replace it with a hand-grown construct:

 - exclusion for truncates is already guaranteed by i_mutex, so it can
   simply fall way
 - the reader side is replaced by an i_dio_count member in struct inode
   that counts the number of pending direct I/O requests.  Truncate can't
   proceed as long as it's non-zero
 - when i_dio_count reaches non-zero we wake up a pending truncate using
   wake_up_bit on a new bit in i_flags
 - new references to i_dio_count can't appear while we are waiting for
   it to read zero because the direct I/O count always needs i_mutex
   (or an equivalent like XFS's i_iolock) for starting a new operation.

This scheme is much simpler, and saves the space of a spinlock_t and a
struct list_head in struct inode (typically 160 bits on a non-debug 64-bit
system).
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      bd5fe6c5
  39. 29 3月, 2011 1 次提交
  41. 10 3月, 2011 1 次提交
  43. 22 2月, 2011 1 次提交
  45. 07 3月, 2011 1 次提交
    • T
      ocfs2: Remove EXIT from masklog. · c1e8d35e
      由 Tao Ma 提交于 
      mlog_exit is used to record the exit status of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

This patch just try to remove it or change it. So:
1. if all the error paths already use mlog_errno, it is just removed.
   Otherwise, it will be replaced by mlog_errno.
2. if it is used to print some return value, it is replaced with
   mlog(0,...).
mlog_exit_ptr is changed to mlog(0.
All those mlog(0,...) will be replaced with trace events later.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
      c1e8d35e
  47. 21 2月, 2011 1 次提交
    • T
      ocfs2: Remove ENTRY from masklog. · ef6b689b
      由 Tao Ma 提交于 
      ENTRY is used to record the entry of a function.
But because it is added in so many functions, if we enable it,
the system logs get filled up quickly and cause too much I/O.
So actually no one can open it for a production system or even
for a test.

So for mlog_entry_void, we just remove it.
for mlog_entry(...), we replace it with mlog(0,...), and they
will be replace by trace event later.
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
      ef6b689b
  49. 16 12月, 2010 1 次提交
    • T
      ocfs2: Try to free truncate log when meeting ENOSPC in write. · 50308d81
      由 Tao Ma 提交于 
      Recently, one of our colleagues meet with a problem that if we
write/delete a 32mb files repeatly, we will get an ENOSPC in
the end. And the corresponding bug is 1288.
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1288

The real problem is that although we have freed the clusters,
they are in truncate log and they will be summed up so that
we can free them once in a whole.

So this patch just try to resolve it. In case we see -ENOSPC
in ocfs2_write_begin_no_lock, we will check whether the truncate
log has enough clusters for our need, if yes, we will try to
flush the truncate log at that point and try again. This method
is inspired by Mark Fasheh <mfasheh@suse.com>. Thanks.

Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NTao Ma <tao.ma@oracle.com>
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
      50308d81
  51. 10 12月, 2010 1 次提交
  53. 26 10月, 2010 1 次提交