Use mpage_writepages() instead of multiple calls to udf_writepage()
to make performance higher.

*Write Speed with writepage() =
 RecSize     ReadSpeed    WriteSpeed  RanReadSpeed RanWriteSpeed
10485760    0.00MB/sec    8.56MB/sec    0.00MB/sec    8.20MB/sec
 1048576    0.00MB/sec    8.57MB/sec    0.00MB/sec    6.42MB/sec
  524288    0.00MB/sec    8.59MB/sec    0.00MB/sec    5.24MB/sec
  262144    0.00MB/sec    8.59MB/sec    0.00MB/sec    4.17MB/sec
  131072    0.00MB/sec    8.53MB/sec    0.00MB/sec    3.32MB/sec
   65536    0.00MB/sec    8.49MB/sec    0.00MB/sec    2.31MB/sec

*Write Speed with writepages()
RecSize     ReadSpeed    WriteSpeed  RanReadSpeed RanWriteSpeed
10485760    0.00MB/sec    9.88MB/sec    0.00MB/sec    9.60MB/sec
 1048576    0.00MB/sec    9.95MB/sec    0.00MB/sec    7.52MB/sec
  524288    0.00MB/sec    9.98MB/sec    0.00MB/sec    6.16MB/sec
  262144    0.00MB/sec    9.90MB/sec    0.00MB/sec    4.98MB/sec
  131072    0.00MB/sec    9.89MB/sec    0.00MB/sec    3.78MB/sec
   65536    0.00MB/sec    9.81MB/sec    0.00MB/sec    2.50MB/sec

There is about 1.4MB/sec speed improvement over 8.5MB/sec,
which comes out around 16% improvement.
Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com>
Signed-off-by: NAshish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: NJan Kara <jack@suse.cz>

When we have a filesystem with an orphan inode list *and* in error
state, things behave differently if:

1) e2fsck -p is done prior to mount: e2fsck fixes things and exits
   happily (barring other significant problems)

vs.

2) mount is done first, then e2fsck -p: due to the orphan inode
   list removal, more errors are found and e2fsck exits with
   UNEXPECTED INCONSISTENCY.

The 2nd case above, on the root filesystem, has the tendency to halt
the boot process, which is unfortunate.

The situation can be improved by not clearing the orphan
inode list when the fs is mounted readonly.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Silences the following sparse warning: fs/reiserfs/xattr.c:899:28: warning:
symbol 'reiserfs_xattr_handlers' was not declared. Should it be static?
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Code tracking when transaction needs to be committed on fdatasync(2) forgets
to handle a situation when only inode's i_size is changed. Thus in such
situations fdatasync(2) doesn't force transaction with new i_size to disk
and that can result in wrong i_size after a crash.

Fix the issue by updating inode's i_datasync_tid whenever its size is
updated.

CC: <stable@vger.kernel.org> # >= 2.6.32
Reported-by: NKristian Nielsen <knielsen@knielsen-hq.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Pull a hwmon fix from Guenter Roeck:
 "Fix sensor readings for Asus M5A78L in asus_atk0110 driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (asus_atk0110) Add quirk for Asus M5A78L

Pull LogFS bugfixes from Prasad Joshi:

 - "logfs: query block device for number of pages to send with bio"

	This BUG was found when LogFS was used on KVM. The patch fixes
	the problem by asking for underlaying block device the number
	of pages to send with each BIO.

 - "logfs: maintain the ordering of meta-inode destruction"

	LogFS maintains file system meta-data in special inodes. These
	inodes are releated to each other, therefore they must be
	destroyed in a proper order.

 - "logfs: initialize the number of iovecs in bio"

	LogFS used to panic when it was created on an encrypted LVM
	volume. The patch fixes the problem by properly initializing
	the BIO.

Plus a couple more:
 - logfs: create a pagecache page if it is not present
 - logfs: destroy the reserved inodes while unmounting

* tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream:
  logfs: query block device for number of pages to send with bio
  logfs: maintain the ordering of meta-inode destruction
  logfs: create a pagecache page if it is not present
  logfs: initialize the number of iovecs in bio
  logfs: destroy the reserved inodes while unmounting

Pull arm-soc fixes from Arnd Bergmann:
 "Bug fixes for various ARM platforms.  About half of these are for OMAP
  and submitted before but did not make it into v3.6-rc2."

* tag 'fixes-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: don't select LEDS_GPIO for snowball
  ARM: imx: build i.MX6 functions only when needed
  ARM: imx: select CPU_FREQ_TABLE when needed
  ARM: imx: fix ksz9021rn_phy_fixup
  ARM: imx: build pm-imx5 code only when PM is enabled
  ARM: omap: allow building omap44xx without SMP
  ARM: dts: imx51-babbage: fix esdhc cd/wp properties
  ARM: imx6: spin the cpu until hardware takes it down
  ARM: ux500: Ensure probing of Audio devices when Device Tree is enabled
  ARM: ux500: Fix merge error, no matching driver name for 'snd_soc_u8500'
  ARM i.MX6q: Add virtual 1/3.5 dividers in the LDB clock path
  ARM: Kirkwood: fix Makefile.boot
  ARM: Kirkwood: Fix iconnect leds
  ARM: Orion: Set eth packet size csum offload limit
  ARM: mv78xx0: fix win_cfg_base prototype
  ARM: OMAP: dmtimers: Fix locking issue in omap_dm_timer_request*()
  ARM: mmp: fix potential NULL dereference
  ARM: OMAP4: Register the OPP table only for 4430 device
  cpufreq: OMAP: Handle missing frequency table on SMP systems
  ARM: OMAP4: sleep: Save the complete used register stack frame
  ...

Merge tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull three xen bug-fixes from Konrad Rzeszutek Wilk:
 - Revert the kexec fix which caused on non-kexec shutdowns a race.
 - Reuse existing P2M leafs - instead of requiring to allocate a large
   area of bootup virtual address estate.
 - Fix a one-off error when adding PFNs for balloon pages.

* tag 'stable/for-linus-3.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/setup: Fix one-off error when adding for-balloon PFNs to the P2M.
  xen/p2m: Reuse existing P2M leafs if they are filled with 1:1 PFNs or INVALID.
  Revert "xen PVonHVM: move shared_info to MMIO before kexec"

Pull powerpc fixes from Benjamin Herrenschmidt:
 "I meant to sent that earlier but got swamped with other things, so
  here are some powerpc fixes for 3.6.  A few regression fixes and some
  bug fixes that I deemed should still make it.

  There's a FSL update from Kumar with a bunch of defconfig updates
  along with a few embedded fixes.

  I also reverted my g5_defconfig update that I merged earlier as it was
  completely busted, not too sure what happened there, I'll do a new one
  later."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  Revert "powerpc: Update g5_defconfig"
  powerpc/perf: Use pmc_overflow() to detect rolled back events
  powerpc: Fix VMX in interrupt check in POWER7 copy loops
  powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
  powerpc: Fix personality handling in ppc64_personality()
  powerpc/dma-iommu: Fix IOMMU window check
  powerpc: Remove unnecessary ifdefs
  powerpc/kgdb: Restore current_thread_info properly
  powerpc/kgdb: Bail out of KGDB when we've been triggered
  powerpc/kgdb: Do not set kgdb_single_step on ppc
  powerpc/mpic_msgr: Add missing includes
  powerpc: Fix null pointer deref in perf hardware breakpoints
  powerpc: Fixup whitespace in xmon
  powerpc: Fix xmon dl command for new printk implementation
  powerpc/fsl: fix "Failed to mount /dev: No such device" errors
  powerpc/fsl: update defconfigs
  booke/wdt: some ioctls do not return values properly
  powerpc/p4080ds: dts - add usb controller version info and port0
  powerpc/85xx: mpc85xx_defconfig - add VIA PATA support for MPC85xxCDS
  powerpc/fsl-pci: Only scan PCI bus if configured as a host

Pull kvm fixes from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86 emulator: use stack size attribute to mask rsp in stack ops
  KVM: MMU: Fix mmu_shrink() so that it can free mmu pages as intended
  ppc: e500_tlb memset clears nothing
  KVM: PPC: Add cache flush on page map
  KVM: PPC: Book3S HV: Fix incorrect branch in H_CEDE code
  KVM: x86: update KVM_SAVE_MSRS_BEGIN to correct value

Pull xfs bugfixes from Ben Myers:
 - fix uninitialised variable in xfs_rtbuf_get()
 - unlock the AGI buffer when looping in xfs_dialloc
 - check for possible overflow in xfs_ioc_trim

* tag 'for-linus-v3.6-rc4' of git://oss.sgi.com/xfs/xfs:
  xfs: check for possible overflow in xfs_ioc_trim
  xfs: unlock the AGI buffer when looping in xfs_dialloc
  xfs: fix uninitialised variable in xfs_rtbuf_get()

Pull MIPS fixes from Ralf Baechle:
 "Random fixes across the MIPS tree.  The two hotspots are several bugs
  in the module loader and the ath79 SOC support; also noteworthy is the
  restructuring of the code to synchronize CPU timers across CPUs on
  startup; the old code recently ceased to work due to unrelated
  changes.

  All except one of these patches have sat for a significant time in
  linux-next for testing."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module
  MIPS: Malta: Delete duplicate PCI fixup.
  MIPS: ath79: don't hardcode the unavailability of the DSP ASE
  MIPS: Synchronize MIPS count one CPU at a time
  MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.
  MIPS: Module: Deal with malformed HI16/LO16 relocation sequences.
  MIPS: Fix race condition in module relocation code.
  MIPS: Fix memory leak in error path of HI16/LO16 relocation handling.
  MIPS: MTX-1: Add udelay to mtx1_pci_idsel
  MIPS: ath79: select HAVE_CLK
  MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240
  MIPS: ath79: Fix number of GPIO lines for AR724[12]
  MIPS: Octeon: Fix broken interrupt controller code.

Pull nfsd bugfixes from J. Bruce Fields:
 "Particular thanks to Michael Tokarev, Malahal Naineni, and Jamie
  Heilman for their testing and debugging help."

* 'for-3.6' of git://linux-nfs.org/~bfields/linux:
  svcrpc: fix svc_xprt_enqueue/svc_recv busy-looping
  svcrpc: sends on closed socket should stop immediately
  svcrpc: fix BUG() in svc_tcp_clear_pages
  nfsd4: fix security flavor of NFSv4.0 callback

Pull block-related fixes from Jens Axboe:

 - Improvements to the buffered and direct write IO plugging from
   Fengguang.

 - Abstract out the mapping of a bio in a request, and use that to
   provide a blk_bio_map_sg() helper.  Useful for mapping just a bio
   instead of a full request.

 - Regression fix from Hugh, fixing up a patch that went into the
   previous release cycle (and marked stable, too) attempting to prevent
   a loop in __getblk_slow().

 - Updates to discard requests, fixing up the sizing and how we align
   them.  Also a change to disallow merging of discard requests, since
   that doesn't really work properly yet.

 - A few drbd fixes.

 - Documentation updates.

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: replace __getblk_slow misfix by grow_dev_page fix
  drbd: Write all pages of the bitmap after an online resize
  drbd: Finish requests that completed while IO was frozen
  drbd: fix drbd wire compatibility for empty flushes
  Documentation: update tunable options in block/cfq-iosched.txt
  Documentation: update tunable options in block/cfq-iosched.txt
  Documentation: update missing index files in block/00-INDEX
  block: move down direct IO plugging
  block: remove plugging at buffered write time
  block: disable discard request merge temporarily
  bio: Fix potential memory leak in bio_find_or_create_slab()
  block: Don't use static to define "void *p" in show_partition_start()
  block: Add blk_bio_map_sg() helper
  block: Introduce __blk_segment_map_sg() helper
  fs/block-dev.c:fix performance regression in O_DIRECT writes to md block devices
  block: split discard into aligned requests
  block: reorganize rounding of max_discard_sectors

Pull libata fixes from Jeff Garzik:
 - libata-acpi regression fix
 - additional or corrected drive quirks for ata_blacklist
 - Kconfig text tweaking
 - new PCI IDs
 - pata_atiixp: quirk for MSI motherboard
 - export ahci_dev_classify for an ahci_platform driver

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
  [libata] new quirk, lift bridge limits for Buffalo DriveStation Quattro
  [libata] Kconfig: Elaborate that SFF is meant for legacy and PATA stuff
  [libata] acpi: call ata_acpi_gtm during ata port init time
  ata_piix: Add Device IDs for Intel Lynx Point-LP PCH
  ahci: Add Device IDs for Intel Lynx Point-LP PCH
  pata_atiixp: override cable detection on MSI E350DM-E33
  ahci: un-staticize ahci_dev_classify

commit d70e551c, Add " 2GB ATA Flash
Disk"/"ADMA428M" to DMA blacklist, should have added a space before 2GB.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This reverts commit b1acf1bb.

Something went horribly wrong when I did savedefconfig, not sure what,
but what's in there is busted so let's revert it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For certain speculative events on Power7, 'perf stat' reports far higher
event count than 'perf record' for the same event.

As described in following commit, a performance monitor exception is raised
even when the the performance events are rolled back.

        commit 0837e324
        Author: Anton Blanchard <anton@samba.org>
        Date:   Wed Mar 9 14:38:42 2011 +1100

perf_event_interrupt() records an event only when an overflow occurs. But
this check for overflow is a simple 'if (val < 0)'.

Because the events are rolled back, this check for overflow fails and the
event is not recorded. perf_event_interrupt() later uses pmc_overflow() to
detect the overflow and resets the counters and the events are lost completely.

To properly detect the overflow of rolled back events, use pmc_overflow()
even when recording events.

To reproduce:
        $ cat strcpy.c
        #include <stdio.h>
        #include <string.h>
        main()
        {
                char buf[256];

                alarm(5);
                while(1)
                        strcpy(buf, "string1");
        }

        $ perf record -e r20014 ./strcpy
        $ perf report -n > report.1
        $ perf stat -e r20014 > report.2
        # Compare report.1 and report.2
Reported-by: NMaynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The enhanced prefetch hint patches corrupt the condition register
that was used to check if we are in interrupt. Fix this by using cr1.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

"powerpc: Use enhanced touch instructions in POWER7
copy_to_user/copy_from_user" was applied twice. Remove one.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Directly comparing current->personality against PER_LINUX32 doesn't work
in cases when any of the personality flags stored in the top three bytes
are used.

Directly forcefully setting personality to PER_LINUX32 or PER_LINUX
discards any flags stored in the top three bytes

Use personality() macro to compare only PER_MASK bytes and make sure that
we are setting only the bits that should be set, instead of overwriting
the whole value.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Checking for device mask to cover the whole IOMMU table is too strict.
IOMMU allocators should handle mask constraint properly for each
allocation.

The patch enables to use old AirPort Extreme cards on PowerMacs with
more than 1GB of memory; without the patch the driver init fails with:

  b43-pci-bridge 0001:01:01.0: Warning: IOMMU window too big for device mask
  b43-pci-bridge 0001:01:01.0: mask: 0x3fffffff, table end: 0x80000000
  b43-phy0 ERROR: The machine/kernel does not support the required 30-bit DMA mask
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For powerpc BooKE and e200, singlestep is handled on the critical/dbg
exception stack. This causes current_thread_info() to fail for kgdb
internal, so previously We work around this issue by copying
the thread_info from the kernel stack before calling kgdb_handle_exception,
and copying it back afterwards.

But actually we don't do this properly. We should backup current_thread_info
then restore that when exit.
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We need to skip a breakpoint exception when it occurs after
a breakpoint has already been removed.
Signed-off-by: NTiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The kgdb_single_step flag has the possibility to indefinitely
hang the system on an SMP system.

The x86 arch have the same problem, and that problem was fixed by
commit 8097551d(kgdb,x86: do not set kgdb_single_step
on x86). This patch does the same behaviors as x86's patch.
Signed-off-by: NDongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add several #includes that mpic_msgr relies on being pulled implicitly,
which only happens on certain configs.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Cc: Meador Inge <meador_inge@mentor.com>
Cc: Jia Hongtao <B38951@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently if you are doing a global perf recording with hardware
breakpoints (ie perf record -e mem:0xdeadbeef -a), you can oops with:

  Faulting instruction address: 0xc000000000738890
  cpu 0xc: Vector: 300 (Data Access) at [c0000003f76af8d0]
      pc: c000000000738890: .hw_breakpoint_handler+0xa0/0x1e0
      lr: c000000000738830: .hw_breakpoint_handler+0x40/0x1e0
      sp: c0000003f76afb50
     msr: 8000000000001032
     dar: 6f0
   dsisr: 42000000
    current = 0xc0000003f765ac00
    paca    = 0xc00000000f262a00   softe: 0        irq_happened: 0x01
    pid   = 6810, comm = loop-read
  enter ? for help
  [c0000003f76afbe0] c00000000073cd04 .notifier_call_chain.isra.0+0x84/0xe0
  [c0000003f76afc80] c00000000073cdbc .notify_die+0x3c/0x60
  [c0000003f76afd20] c0000000000139f0 .do_dabr+0x40/0xf0
  [c0000003f76afe30] c000000000005a9c handle_dabr_fault+0x14/0x48
  --- Exception: 300 (Data Access) at 0000000010000480
  SP (ff8679e0) is in userspace

This is because we don't check to see if the break point is associated
with task before we deference the task_struct pointer.

This changes the update to use current.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are a few whitespace goolies in xmon.c, some of them appear to
be my fault. Fix them all in one go.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since the printk internals were reworked the xmon 'dl' command which
dumps the content of __log_buf has stopped working.

It is now a structured buffer, so just dumping it doesn't really work.

Use the helpers added for kgdb to print out the content.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Pull crypto fixes from Herbert Xu:
 "This push fixes a build error on 32-bit archs in the hifn driver as
  well as a potential deadlock in the caam driver."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix possible deadlock condition
  crypto: hifn_795x - fix 64bit division and undefined __divdi3 on 32bit archs

Pull UDF, ext3 & reiserfs fixes from Jan Kara:
 "A couple of fixes (udf, reiserfs, ext3) that accumulated over my
  vacation."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: fix retun value on error path in udf_load_logicalvol
  jbd: don't write superblock when unmounting an ro filesystem
  reiserfs: fix deadlocks with quotas
  quota: Move down dqptr_sem read after initializing default warn[] type at __dquot_alloc_space().
  UDF: During mount free lvid_bh before rescanning with different blocksize
  udf: fix udf_setsize() for file data in ICB

Pull UBIFS fixes from Artem Bityutskiy:
 - Fix crash on error which prevents emulated power-cut testing.
 - Fix log reply regression introduced in 3.6-rc1.
 - Fix UBIFS complaints about too small debug buffer size which.
 - Fix error message spelling, and remove incorrect commentary.

* tag 'upstream-3.6-rc3' of git://git.infradead.org/linux-ubifs:
  UBIFS: fix error messages spelling
  UBIFS: fix complaints about too small debug buffer size
  UBIFS: fix replay regression
  UBIFS: fix crash on error path
  UBIFS: remove stale commentary

Pull IDE power management bugfix from David S. Miller.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: fix generic_ide_suspend/resume Oops

Pull perf fixes from Ingo Molnar:
 "This tree contains misc fixlets: a perf script python binding fix, a
  uprobes fix and a syscall tracing fix."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Add missing files to build the python binding
  uprobes: Fix mmap_region()'s mm->mm_rb corruption if uprobe_mmap() fails
  tracing/syscalls: Fix perf syscall tracing when syscall_nr == -1

Pull x86 fixes from Ingo Molnar:
 "This tree contains assorted fixlets: an alternatives patching crash
  fix, an irq migration/hotplug interaction fix, a fix for large AMD
  microcode images and a comment fixlet."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Fix broken ucode patch size check
  x86/alternatives: Fix p6 nops on non-modular kernels
  x86/fixup_irq: Use cpu_online_mask instead of cpu_all_mask
  x86/spinlocks: Fix comment in spinlock.h

Pull timer fixes from Thomas Gleixner:
 "Mostly small fixes for the fallout of the timekeeping overhaul in 3.6
  along with stable fixes to address an accumulation problem and missing
  sanity checks for RTC readouts and user space provided values."

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Avoid making adjustments if we haven't accumulated anything
  time: Avoid potential shift overflow with large shift values
  time: Fix casting issue in timekeeping_forward_now
  time: Ensure we normalize the timekeeper in tk_xtime_add
  time: Improve sanity checking of timekeeping inputs

Pull HID fix from Jiri Kosina:
 "Fix for one particular device not being properly claimed by
  hid-multitouch driver"

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Remove QUANTA from special drivers list

If range.start or range.minlen is bigger than filesystem size, return
invalid value error. This fixes possible overflow in BTOBB macro when
passed value was nearly ULLONG_MAX.
Signed-off-by: NTomas Racek <tracek@redhat.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NBen Myers <bpm@sgi.com>

Also update some commens in the area to make the code easier to read.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMark Tinguely <tinguely@sgi.com>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NBen Myers <bpm@sgi.com>