The TX DMA buffer is allocated only once, because the
allocation/deallocation of the buffer for EACH chunk of data is
time-consuming and prone to memory fragmentation.

Using a coherent DMA buffer avoids extra data cache calls.

[nicolas.ferre@atmel.com: coding style modifications]
Signed-off-by: NWolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix two timeout errors, one for slow SDHC cards and one for slow users
while inserting SD cards.
Signed-off-by: NWolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes two pointer errors, one which leads to memory overwrites if used
with large chunks of data.
Signed-off-by: NWolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If no platform_data was givin to the device it's going to use it's default
platform data struct which has all fields initialized to zero.  As a
result the driver is going to try to request gpio0 both as write protect
and card detect pin.  Which of course will fail and makes the driver
unusable

Previously to the introduction of no_wprotect and no_detect the behavior
was to assume that if no platform data was given there is no write protect
or card detect pin.  This patch restores that behavior.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

And bring them back to 4-bit mode during resume.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some SDIO cards may suspend while keeping function interrupts active
especially in the powered suspend case.  Upon resume we need to kick the
SDIO interrupt thread to check for pending interrupts and to restart card
IRQ detection at the host controller level.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Seen on a Marvell 8686 SDIO card and Via VX855 controller: we must avoid
sending CMD3/5/7 on a resume where power has been maintained, because the
8686 will refuse to respond to them and the MMC stack will give up on the
card.
Signed-off-by: NChris Ball <cjb@laptop.org>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tested with an XO v1.5 from OLPC.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch series provides the core changes needed to allow SDIO cards to
remain powered and active while the host system is suspended, and let them
wake up the host system when needed.  This is used to implement
wake-on-lan with SDIO wireless cards at the moment.  Patches to add that
support to the libertas driver will be posted separately.

This patch:

Some SDIO cards have the ability to keep on running autonomously when the
host system is suspended, and wake it up when needed.  This however
requires that the host controller preserve power to the card, and
configure itself appropriately for wake-up.

There is however 4 layers of abstractions involved: the host controller
driver, the MMC core code, the SDIO card management code, and the actual
SDIO function driver.  To make things simple and manageable, host drivers
must advertise their PM capabilities with a feature bitmask, then function
drivers can query and set those features from their suspend method.  Then
each layer in the suspend call chain is expected to act upon those bits
accordingly.

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sdhci_set_adma_desc() is using byte-writes to write data in a specified
order into memory.  Change to using __le16 for the two byte and __le32 for
the four byte cases and use the cpu_to_{le16,le32} to do the conversion
before writing.

This will reduce the size of the code and the number of writes as we no
longer need to chop the data up before writing.

As an example on ARM S3C64XX SoC, in little-endian configuration:

 000000d4 <sdhci_set_adma_desc>:
-      d8:	e1a0c423 	lsr	ip, r3, #8
-      dc:	e1a0ec21 	lsr	lr, r1, #24
-      e0:	e1a04821 	lsr	r4, r1, #16
-      e4:	e1a05421 	lsr	r5, r1, #8
-      e8:	e1a06442 	asr	r6, r2, #8
-      ec:	e5c0c001 	strb	ip, [r0, #1]
-      f0:	e5c0e007 	strb	lr, [r0, #7]
-      f4:	e5c04006 	strb	r4, [r0, #6]
-      f8:	e5c05005 	strb	r5, [r0, #5]
-      fc:	e5c01004 	strb	r1, [r0, #4]
-     100:	e5c06003 	strb	r6, [r0, #3]
-     104:	e5c02002 	strb	r2, [r0, #2]
-     108:	e5c03000 	strb	r3, [r0]
+      d4:	e5801004 	str	r1, [r0, #4]
+      d8:	e1c030b0 	strh	r3, [r0]
+      dc:	e1c020b2 	strh	r2, [r0, #2]
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The code to write the ADMA descriptor into memory is repeated several
times throughout sdhci_adma_table_pre, and thus should be moved into a
common function.  This will also be useful if the patch to make the write
more efficient is accepted.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some SDIO cards expect byte transfers not to exceed the configured block
transfer size.  Add a quirk to that effect.

Patches to make use of this quirk will be sent separately.
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The hardcoded value doesn't really work for all cards.
Signed-off-by: NCliff Cai <cliff.cai@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The host/Kconfig file is only included when MMC is selected.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The local sg variable is only used with BF54x code.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This prevents those without an Atmel chip having a line in kernel
configuration which says "Atmel SD/MMC Driver" without any option.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for 8bit MMC cards.  The controller data width is configurable
depending on the wires setting in the platform data structure.

MMC 8bit is tested on OMAPL137 and MMC 4bit is tested on OMAPL138 EVM.
Signed-off-by: NVipin Bhandari <vipin.bhandari@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Chaithrika U S <chaithrika@ti.com>
Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch solves nasty problem original driver has.

Original goal of the ricoh_mmc was to disable this device because then,
mmc cards can be read using standard SDHCI controller, thus avoiding
writing of yet another driver.

However, the act of disablement, makes other pci functions that belong to
this controller (xD and memstick) shift up one level, thus pci core has
now wrong idea about these devices.

To fix this issue, this patch moves the driver into the pci quirk section,
thus it is executes before the pci is enumerated, and therefore solving
that issue, also same sequence of commands is performed on resume for same
reasons.

Also regardless of the above, this way is cleaner.  You still need to set
CONFIG_MMC_RICOH_MMC to enable this quirk
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NPhilip Langdale <philipl@overt.org>
Acked-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fs/compat_ioctl.c: In function 'do_ioctl_trans':
fs/compat_ioctl.c:534: warning: 'karg' may be used uninitialized in this function
fs/compat_ioctl.c:533: warning: 'kcmd' may be used uninitialized in this function
fs/compat_ioctl.c:656: warning: 'ret' may be used uninitialized in this function

Reduces text size by 44 bytes.

If someone calls one of these functions with an unexpected argument, the
code's buggy as-is.

Amerigo Wang <amwang@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace open-coded loop with for_each_set_bit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The function name must be followed by a space, hypen, space, and a short
description.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Build list_sort() only for configs that need it -- those that don't save
~581 bytes (i386).
Signed-off-by: NDon Mullis <don.mullis@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clarify and correct header comment of list_sort().
Signed-off-by: NDon Mullis <don.mullis@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

XFS and UBIFS can pass long lists to list_sort(); this alternative
implementation scales better, reaching ~3x performance gain when list
length exceeds the L2 cache size.

Stand-alone program timings were run on a Core 2 duo L1=32KB L2=4MB,
gcc-4.4, with flags extracted from an Ubuntu kernel build.  Object size is
581 bytes compared to 455 for Mark J.  Roberts' code.

Worst case for either implementation is a list length just over a power of
two, and to roughly the same degree, so here are timing results for a
range of 2^N+1 lengths.  List elements were 16 bytes each including malloc
overhead; initial order was random.

                      time (msec)
                      Tatham-Roberts
                      |       generic-Mullis-v2
loop_count  length    |       |    ratio
4000000       2     206     294    1.427
2000000       3     176     227    1.289
1000000       5     199     172    0.864
 500000       9     235     178    0.757
 250000      17     243     182    0.748
 125000      33     261     196    0.750
  62500      65     277     209    0.754
  31250     129     292     219    0.75
  15625     257     317     235    0.741
   7812     513     340     252    0.741
   3906    1025     362     267    0.737
   1953    2049     388     283    0.729  ~ L1 size
    976    4097     556     323    0.580
    488    8193     678     361    0.532
    244   16385     773     395    0.510
    122   32769     844     418    0.495
     61   65537     917     454    0.495
     30  131073    1128     543    0.481
     15  262145    2355     869    0.369  ~ L2 size
      7  524289    5597    1714    0.306
      3 1048577    6218    2022    0.325

Mark's code does not actually implement the usual or generic mergesort,
but rather a variant from Simon Tatham described here:

    http://www.chiark.greenend.org.uk/~sgtatham/algorithms/listsort.html

Simon's algorithm performs O(log N) passes over the entire input list,
doing merges of sublists that double in size on each pass.  The generic
algorithm instead merges pairs of equal length lists as early as possible,
in recursive order.  For either algorithm, the elements that extend the
list beyond power-of-two length are a special case, handled as nearly as
possible as a "rounding-up" to a full POT.

Some intuition for the locality of reference implications of merge order
may be gotten by watching this animation:

    http://www.sorting-algorithms.com/merge-sort

Simon's algorithm requires only O(1) extra space rather than the generic
algorithm's O(log N), but in my non-recursive implementation the actual
O(log N) data is merely a vector of ~20 pointers, which I've put on the
stack.

Long-running list_sort() calls: If the list passed in may be long, or the
client's cmp() callback function is slow, the client's cmp() may
periodically invoke cond_resched() to voluntarily yield the CPU.  All
inner loops of list_sort() call back to cmp().

Stability of the sort: distinct elements that compare equal emerge from
the sort in the same order as with Mark's code, for simple test cases.  A
boot-time test is provided to verify this and other correctness
requirements.

A kernel that uses drm.ko appears to run normally with this change; I have
no suitable hardware to similarly test the use by UBIFS.

[akpm@linux-foundation.org: style tweaks, fix comment, make list_sort_test __init]
Signed-off-by: NDon Mullis <don.mullis@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Joe Perches <joe@perches.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removes 32 bytes on core2 with gcc 4.4.1:
   text    data     bss     dec     hex filename
   3196       0       0    3196     c7c lib/string-BEFORE.o
   3164       0       0    3164     c5c lib/string-AFTER.o
Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patchwork queues show the acceptance/rejection state of submitted patches
for various MAINTAINER trees.  Document their existence.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

by commit 0234f84e
Update patterns
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

by commit 955015bbSigned-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To match arch/*/kernel perf_event location changes
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f53a2ade ("tty: esp: remove
broken driver") removed it
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c95d1e53 ("cs5535: drop the
Geode-specific MFGPT/GPIO code") removed it.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If MAINTAINERS section entries are misformatted, it was possible to have
an infinite loop.

Correct the defect by always moving the index to the end of section + 1

Also, exit check for exclude as soon as possible.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Picky mail systems won't accept email addresses where recipient has period
in name; ie.  David S.  Miller <davemloft.net> will not work.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

perlcritic is a standard checker for Perl Best Practices.  This patch
fixes most of the warnings in the get_maintainer script.  If kernel
programmers are going to have checkpatch they should write clean scripts
as well...

Bareword file handle opened at line 176, column 1.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 176, column 1.  See page 207 of PBP.  (Severity: 5)
Bareword file handle opened at line 207, column 5.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 207, column 5.  See page 207 of PBP.  (Severity: 5)
Bareword file handle opened at line 246, column 6.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 246, column 6.  See page 207 of PBP.  (Severity: 5)
Bareword file handle opened at line 258, column 2.  See pages 202,204 of PBP.  (Severity: 5)
Two-argument "open" used at line 258, column 2.  See page 207 of PBP.  (Severity: 5)
Expression form of "eval" at line 983, column 17.  See page 161 of PBP.  (Severity: 5)
Expression form of "eval" at line 985, column 17.  See page 161 of PBP.  (Severity: 5)
Subroutine prototypes used at line 1186, column 1.  See page 194 of PBP.  (Severity: 5)
Subroutine prototypes used at line 1206, column 1.  See page 194 of PBP.  (Severity: 5)
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Doesn't need or accept '-' as a trailing option to read stdin.  Doesn't
print usage() after bad options.  Adds --usage as command line equivalent
of --help
Suggested-by: NBorislav Petkov <petkovbb@googlemail.com>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Print the complete contents of the matched subsystems
in pattern match depth order.

Sample output:

$ ./scripts/get_maintainer.pl --sections -f drivers/net/usb/smsc95xx.c
USB SMSC95XX ETHERNET DRIVER
M:Steve Glendinning <steve.glendinning@smsc.com>
L:netdev@vger.kernel.org
S:Supported
F:drivers/net/usb/smsc95xx.*
USB SUBSYSTEM
M:Greg Kroah-Hartman <gregkh@suse.de>
L:linux-usb@vger.kernel.org
W:http://www.linux-usb.org
T:quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S:Supported
F:Documentation/usb/
F:drivers/net/usb/
F:drivers/usb/
F:include/linux/usb.h
F:include/linux/usb/
NETWORKING DRIVERS
L:netdev@vger.kernel.org
W:http://www.linuxfoundation.org/en/Net
T:git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S:Odd Fixes
F:drivers/net/
F:include/linux/if_*
F:include/linux/*device.h
THE REST
M:Linus Torvalds <torvalds@linux-foundation.org>
L:linux-kernel@vger.kernel.org
Q:http://patchwork.kernel.org/project/LKML/list/
T:git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S:Buried alive in reporters
F:*
F:*/
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add an imperfect option to search a source file for email addresses.

New option:  --file-emails or --fe

email addresses in files are freeform text and are nearly impossible to
parse.  Still, might as well try to do a somewhat acceptable job of
finding them.  This code should find all addresses that are in the form
addr@domain.tld

The code assumes that up to 3 alphabetic words along with dashes, commas,
and periods that preceed the email address are a name.

If 3 words are found for the name, and one of the first two words are a
single letter and period, or just a single letter then the 3 words are use
as name otherwise the last 2 words are used.

Some variants that are shown correctly:
    John Smith <jksmith@domain.org>
    Random J. Developer <rjd@tld.com>
    Random J. Developer (rjd@tld.com)
    J. Random Developer rjd@tld.com

Variants that are shown nominally correctly:
    Written by First Last (funny-addr@somecompany.com)
is shown as:
    First Last <funny-addr@somecompany.com>

Variants that are shown incorrectly:
    Some Really Long Name <srln@foo.bar>
    MontaVista Software, Inc. <source@mvista.com>
are returned as:
    Long Name <srln@foo.bar>
    "Software, Inc" <source@mvista.com>

--roles and --rolestats show "(in file)" for matches.

For instance:

Without -file-emails:

$ ./scripts/get_maintainer.pl -f -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
linux-kernel@vger.kernel.org (open list)

With -fe:

$ ./scripts/get_maintainer.pl -f -fe -nogit -roles net/core/netpoll.c
David S. Miller <davem@davemloft.net> (maintainer:NETWORKING [GENERAL])
Matt Mackall <mpm@selenic.com> (in file)
Ingo Molnar <mingo@redhat.com> (in file)
linux-kernel@vger.kernel.org (open list)
netdev@vger.kernel.org (open list:NETWORKING [GENERAL])

The number of email addresses in the file in not limited.  Neither is the
number of returned email addresses.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>