Introduce NOKPROBE_SYMBOL() macro which builds a kprobes
blacklist at kernel build time.

The usage of this macro is similar to EXPORT_SYMBOL(),
placed after the function definition:

  NOKPROBE_SYMBOL(function);

Since this macro will inhibit inlining of static/inline
functions, this patch also introduces a nokprobe_inline macro
for static/inline functions. In this case, we must use
NOKPROBE_SYMBOL() for the inline function caller.

When CONFIG_KPROBES=y, the macro stores the given function
address in the "_kprobe_blacklist" section.

Since the data structures are not fully initialized by the
macro (because there is no "size" information),  those
are re-initialized at boot time by using kallsyms.
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20140417081705.26341.96719.stgit@ltc230.yrl.intra.hitachi.co.jp
Cc: Alok Kataria <akataria@vmware.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christopher Li <sparse@chrisli.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jan-Simon Möller <dl9pf@gmx.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-sparse@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

David Vrabel identified a regression when using automatic NUMA balancing
under Xen whereby page table entries were getting corrupted due to the
use of native PTE operations.  Quoting him

	Xen PV guest page tables require that their entries use machine
	addresses if the preset bit (_PAGE_PRESENT) is set, and (for
	successful migration) non-present PTEs must use pseudo-physical
	addresses.  This is because on migration MFNs in present PTEs are
	translated to PFNs (canonicalised) so they may be translated back
	to the new MFN in the destination domain (uncanonicalised).

	pte_mknonnuma(), pmd_mknonnuma(), pte_mknuma() and pmd_mknuma()
	set and clear the _PAGE_PRESENT bit using pte_set_flags(),
	pte_clear_flags(), etc.

	In a Xen PV guest, these functions must translate MFNs to PFNs
	when clearing _PAGE_PRESENT and translate PFNs to MFNs when setting
	_PAGE_PRESENT.

His suggested fix converted p[te|md]_[set|clear]_flags to using
paravirt-friendly ops but this is overkill.  He suggested an alternative
of using p[te|md]_modify in the NUMA page table operations but this is
does more work than necessary and would require looking up a VMA for
protections.

This patch modifies the NUMA page table operations to use paravirt
friendly operations to set/clear the flags of interest.  Unfortunately
this will take a performance hit when updating the PTEs on
CONFIG_PARAVIRT but I do not see a way around it that does not break
Xen.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Acked-by: NDavid Vrabel <david.vrabel@citrix.com>
Tested-by: NDavid Vrabel <david.vrabel@citrix.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Noonan <steven@uplinklabs.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix uninitialized return code in default case in cmpxchg-local.h

This patch fixes the code to prevent an uninitialized return value that is detected
when compiling with clang. The bug produces numerous warnings when compiling the
Linux kernel with clang.
Signed-off-by: NBehan Webster <behanw@converseincode.com>
Signed-off-by: NMark Charlebois <charlebm@gmail.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

This patch creates a generic implementation of early_ioremap() support
based on the existing x86 implementation.  early_ioremp() is useful for
early boot code which needs to temporarily map I/O or memory regions
before normal mapping functions such as ioremap() are available.

Some architectures have optional MMU.  In the no-MMU case, the remap
functions simply return the passed in physical address and the unmap
functions do nothing.
Signed-off-by: NMark Salter <msalter@redhat.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kernel has never been audited to ensure that this_cpu operations are
consistently used throughout the kernel.  The code generated in many
places can be improved through the use of this_cpu operations (which
uses a segment register for relocation of per cpu offsets instead of
performing address calculations).

The patch set also addresses various consistency issues in general with
the per cpu macros.

A. The semantics of __this_cpu_ptr() differs from this_cpu_ptr only
   because checks are skipped. This is typically shown through a raw_
   prefix. So this patch set changes the places where __this_cpu_ptr()
   is used to raw_cpu_ptr().

B. There has been the long term wish by some that __this_cpu operations
   would check for preemption. However, there are cases where preemption
   checks need to be skipped. This patch set adds raw_cpu operations that
   do not check for preemption and then adds preemption checks to the
   __this_cpu operations.

C. The use of __get_cpu_var is always a reference to a percpu variable
   that can also be handled via a this_cpu operation. This patch set
   replaces all uses of __get_cpu_var with this_cpu operations.

D. We can then use this_cpu RMW operations in various places replacing
   sequences of instructions by a single one.

E. The use of this_cpu operations throughout will allow other arches than
   x86 to implement optimized references and RMV operations to work with
   per cpu local data.

F. The use of this_cpu operations opens up the possibility to
   further optimize code that relies on synchronization through
   per cpu data.

The patch set works in a couple of stages:

I. Patch 1 adds the additional raw_cpu operations and raw_cpu_ptr().
    Also converts the existing __this_cpu_xx_# primitive in the x86
    code to raw_cpu_xx_#.

II. Patch 2-4 use the raw_cpu operations in places that would give
     us false positives once they are enabled.

III. Patch 5 adds preemption checks to __this_cpu operations to allow
    checking if preemption is properly disabled when these functions
    are used.

IV. Patches 6-20 are patches that simply replace uses of __get_cpu_var
   with this_cpu_ptr. They do not depend on any changes to the percpu
   code. No preemption tests are skipped if they are applied.

V. Patches 21-46 are conversion patches that use this_cpu operations
   in various kernel subsystems/drivers or arch code.

VI.  Patches 47/48 (not included in this series) remove no longer used
    functions (__this_cpu_ptr and __get_cpu_var).  These should only be
    applied after all the conversion patches have made it and after we
    have done additional passes through the kernel to ensure that none of
    the uses of these functions remain.

This patch (of 46):

The patches following this one will add preemption checks to __this_cpu
ops so we need to have an alternative way to use this_cpu operations
without preemption checks.

raw_cpu_ops will be the basis for all other ops since these will be the
operations that do not implement any checks.

Primitive operations are renamed by this patch from __this_cpu_xxx to
raw_cpu_xxxx.

Also change the uses of the x86 percpu primitives in preempt.h.
These depend directly on asm/percpu.h (header #include nesting issue).
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Alex Shi <alex.shi@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bryan Wu <cooloney@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: David Daney <david.daney@cavium.com>
Cc: David Miller <davem@davemloft.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Hedi Berriche <hedi@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Robert Richter <rric@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When !CONFIG_BUG and !HAVE_ARCH_BUG, define the generic BUG() as an
infinite loop rather than a no-op.  This avoids undefined behavior if
execution ever actually reaches BUG(), and avoids warnings about code
after BUG() (such as on non-void functions calling BUG() and then not
returning).

bloat-o-meter results:

  add/remove: 0/0 grow/shrink: 43/10 up/down: 235/-98 (137)
  function                             old     new   delta
  umount_collect                       119     138     +19
  notify_change                        306     324     +18
  xstate_enable_boot_cpu               252     269     +17
  kunmap                                54      70     +16
  balloon_page_dequeue                 112     126     +14
  mm_take_all_locks                    223     233     +10
  list_lru_walk_node                   143     152      +9
  vma_adjust                          1059    1067      +8
  pcpu_setup_first_chunk              1130    1138      +8
  mm_drop_all_locks                    143     151      +8
  ns_capable                            55      62      +7
  anon_transport_class_unregister        8      15      +7
  srcu_init_notifier_head               35      41      +6
  shrink_dcache_for_umount             174     180      +6
  kunmap_high                           99     105      +6
  end_page_writeback                    43      49      +6
  do_exit                             1339    1345      +6
  __kfifo_dma_out_prepare_r             86      92      +6
  __kfifo_dma_in_prepare_r              90      96      +6
  fixup_user_fault                     120     125      +5
  repair_env_string                     73      77      +4
  read_cache_pages_invalidate_page      56      60      +4
  isolate_lru_pages.isra               142     146      +4
  do_notify_parent_cldstop             255     259      +4
  cpu_init                             370     374      +4
  utimes_common                        270     272      +2
  tasklet_hi_action                     91      93      +2
  tasklet_action                        91      93      +2
  set_pte_vaddr                         46      48      +2
  find_get_pages_tag                   202     204      +2
  early_iounmap                        185     187      +2
  __native_set_fixmap                   36      38      +2
  __get_user_pages                     822     824      +2
  __early_ioremap                      299     301      +2
  yield_task_stop                        1       2      +1
  tick_resume                           37      38      +1
  switched_to_stop                       1       2      +1
  switched_to_idle                       1       2      +1
  prio_changed_stop                      1       2      +1
  prio_changed_idle                      1       2      +1
  pm_qos_power_read                    111     112      +1
  arch_cpu_idle_dead                     1       2      +1
  __insert_vmap_area                   140     141      +1
  sys_renameat                         614     612      -2
  mm_fault_error                       297     295      -2
  SyS_renameat                         614     612      -2
  sys_linkat                           416     413      -3
  SyS_linkat                           416     413      -3
  chmod_common                         129     122      -7
  proc_cap_handler                     240     225     -15
  __schedule                           849     831     -18
  sys_madvise                         1077    1054     -23
  SyS_madvise                         1077    1054     -23
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Reported-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The stub version of WARN for !CONFIG_BUG completely ignored its format
string and subsequent arguments; make it check them instead, using
no_printk.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Reported-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When !CONFIG_BUG, WARN_ON and family become simple passthroughs of their
condition argument; however, WARN_ON_ONCE and family still have conditions
and a boolean to detect one-time invocation, even though the warning
they'd emit doesn't exist.  Make the existing definitions conditional on
CONFIG_BUG, and add definitions for !CONFIG_BUG that map to the
passthrough versions of WARN and WARN_ON.

This saves 4.4k on a minimized configuration (smaller than allnoconfig),
and 20.6k with defconfig plus CONFIG_BUG=n.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Every caller of syscall_get_arch() uses current for the task and no
implementors of the function need args.  So just get rid of both of
those things.  Admittedly, since these are inline functions we aren't
wasting stack space, but it just makes the prototypes better.
Signed-off-by: NEric Paris <eparis@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux390@de.ibm.com
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-arch@vger.kernel.org

asm-generic/rwsem.h used to live under arch/powerpc. During its
liberation to common code, a few references to its former home where
preserved, in particular the definition of RWSEM_ACTIVE_MASK is
predicated on CONFIG_PPC64.

This patch updates the ifdefs and comments to architecturally neutral
versions.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NRichard Kuo <rkuo@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

We already have nsecs_to_cputime(). Now we need to be able to convert
the other way around in order to fix a bug on steal time accounting.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Even though nsec based cputime_t maps to u64, nsecs_to_cputime() must
return a cputime_t value. We want to enforce this kind of cast in order
to track down buggy manipulations of cputime_t such as direct access
of its values under wrong assumptions on its backend type (nsecs,
jiffies, etc...) by core code.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Add support for custom reserved memory drivers. Call their init() function
for each reserved region and prepare for using operations provided by them
with by the reserved_mem->ops array.

Based on previous code provided by Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

In a virtualized environment and given an appropriate interface the guest
can mark pages as unused while they are free (for the s390 implementation
see git commit 45e576b1 "guest page hinting light"). For the host
the unused state is a property of the pte.

This patch adds the primitive 'pte_unused' and code to the host swap out
handler so that pages marked as unused by all mappers are not swapped out
but discarded instead, thus saving one IO for swap out and potentially
another one for swap in.

[ Martin Schwidefsky: patch reordering and simplification ]
Signed-off-by: NKonstantin Weitz <konstantin.weitz@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Archs like ppc64 doesn't do tlb flush in set_pte/pmd functions when using
a hash table MMU for various reasons (the flush is handled as part of
the PTE modification when necessary).

ppc64 thus doesn't implement flush_tlb_range for hash based MMUs.

Additionally ppc64 require the tlb flushing to be batched within ptl locks.

The reason to do that is to ensure that the hash page table is in sync with
linux page table.

We track the hpte index in linux pte and if we clear them without flushing
hash and drop the ptl lock, we can have another cpu update the pte and can
end up with duplicate entry in the hash table, which is fatal.

We also want to keep set_pte_at simpler by not requiring them to do hash
flush for performance reason. We do that by assuming that set_pte_at() is
never *ever* called on a PTE that is already valid.

This was the case until the NUMA code went in which broke that assumption.

Fix that by introducing a new pair of helpers to set _PAGE_NUMA in a
way similar to ptep/pmdp_set_wrprotect(), with a generic implementation
using set_pte_at() and a powerpc specific one using the appropriate
mechanism needed to keep the hash table in sync.
Acked-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The goal of multi-platform kernels is to remove the need for mach
directories and machine descriptors. To further that goal,
introduce CPU_METHOD_OF_DECLARE() to allow cpu hotplug/smp
support to be separated from the machine descriptors.
Implementers should specify an enable-method property in their
cpus node and then implement a matching set of smp_ops in their
hotplug/smp code, wiring it up with the CPU_METHOD_OF_DECLARE()
macro. When the kernel is compiled we'll collect all the
enable-method smp_ops into one section for use at boot.

At boot time we'll look for an enable-method in each cpu node and
try to match that against all known CPU enable methods in the
kernel. If there are no enable-methods in the cpu nodes we
fallback to the cpus node and try to use any enable-method found
there. If that doesn't work we fall back to the old way of using
the machine descriptor.
Acked-by: NMark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: <devicetree@vger.kernel.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

This patch allows each architecture to add its specific assembly optimized
arch_mcs_spin_lock_contended and arch_mcs_spinlock_uncontended for
MCS lock and unlock functions.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: AswinChandramouleeswaran <aswin@hp.com>
Cc: George Spelvin <linux@horizon.com>
Cc: Rik vanRiel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: MichelLespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Figo.zhang" <figo1802@gmail.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1390347382.3138.67.camel@schen9-DESKSigned-off-by: NIngo Molnar <mingo@kernel.org>

Enabling '-Wsign-compare' compiler warnings on code that includes
include/linux/bitops.h can generate the following warning:

  In file included from include/linux/kernel.h:10:0,
                    from <random filename>:48:
  include/linux/bitops.h: In function 'hweight_long':
  include/linux/bitops.h:77:26: error: signed and unsigned type in conditional expression [-Werror=sign-compare]

(converted to an error with -Werror)

This is due to the use of the logical negation operator '!' in the
__const_hweight8 macro in include/asm-generic/bitops/const_hweight.h.
The use of that operator here results in a signed value.

Fix by explicitly casting the __const_hweight8 macro expansion to
'unsigned int'.  While here, clean up several checkpatch.pl warnings.
Signed-off-by: NPaul Walmsley <pwalmsley@nvidia.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1312180459580.30198@tamienSigned-off-by: NIngo Molnar <mingo@kernel.org>

The documentation was not clear about whether
gpio_direction_output should take a logical value or the physical
level on the output line, i.e. whether the ACTIVE_LOW status
would be taken into account.

This converts gpiod_direction_output to use the logical level
and adds a new gpiod_direction_output_raw for the raw value.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Many architectures provide an asm/fixmap.h which defines support for
compile-time 'special' virtual mappings which need to be made before
paging_init() has run.  This support is also used for early ioremap on
x86.  Much of this support is identical across the architectures.  This
patch consolidates all of the common bits into asm-generic/fixmap.h
which is intended to be included from arch/*/include/asm/fixmap.h.
Signed-off-by: NMark Salter <msalter@redhat.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonas Bonn <jonas.bonn@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now all 64-bit architectures have been converted to int-ll64.h, we can
remove int-l64.h in kernelspace.

For backwards compatibility, alpha, ia64, mips64, and powerpc64 still
use int-l64.h in userspace.

This is the (reworked for UAPI) non-documentation part of more than two
year old "asm/types.h: All architectures use int-ll64.h in kernelspace"
(https://lkml.org/lkml/2011/8/13/104)

Since <asm/types.h> (from include/uapi/asm-generic/types.h) is used for
both kernel and user space, include/asm-generic/int-ll64.h cannot just
become include/asm-generic/types.h, as Arnd suggested.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Each asm-generic/audit_xx.h defines a set of system calls for respective
audit permission class (read, write, change attribute or exec).
This patch changes two entries:

1) fchown in audit_change_attr.h
  Make fchown included by its own because in asm-generic/unistd.h, for example,
  fchown always exists while chown is optional. This change is necessary at
  least for arm64.

2) truncate64 in audit_write.h
  Add missing truncate64/ftruncate64 as well as truncate/ftruncate
Signed-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NEric Paris <eparis@redhat.com>

This patch fix the below crash

NIP [c00000000004cee4] .__hash_page_thp+0x2a4/0x440
LR [c0000000000439ac] .hash_page+0x18c/0x5e0
...
Call Trace:
[c000000736103c40] [00001ffffb000000] 0x1ffffb000000(unreliable)
[437908.479693] [c000000736103d50] [c0000000000439ac] .hash_page+0x18c/0x5e0
[437908.479699] [c000000736103e30] [c00000000000924c] .do_hash_page+0x4c/0x58

On ppc64 we use the pgtable for storing the hpte slot information and
store address to the pgtable at a constant offset (PTRS_PER_PMD) from
pmd. On mremap, when we switch the pmd, we need to withdraw and deposit
the pgtable again, so that we find the pgtable at PTRS_PER_PMD offset
from new pmd.

We also want to move the withdraw and deposit before the set_pmd so
that, when page fault find the pmd as trans huge we can be sure that
pgtable can be located at the offset.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

A number of situations currently require the heavyweight smp_mb(),
even though there is no need to order prior stores against later
loads.  Many architectures have much cheaper ways to handle these
situations, but the Linux kernel currently has no portable way
to make use of them.

This commit therefore supplies smp_load_acquire() and
smp_store_release() to remedy this situation.  The new
smp_load_acquire() primitive orders the specified load against
any subsequent reads or writes, while the new smp_store_release()
primitive orders the specifed store against any prior reads or
writes.  These primitives allow array-based circular FIFOs to be
implemented without an smp_mb(), and also allow a theoretical
hole in rcu_assign_pointer() to be closed at no additional
expense on most architectures.

In addition, the RCU experience transitioning from explicit
smp_read_barrier_depends() and smp_wmb() to rcu_dereference()
and rcu_assign_pointer(), respectively resulted in substantial
improvements in readability.  It therefore seems likely that
replacing other explicit barriers with smp_load_acquire() and
smp_store_release() will provide similar benefits.  It appears
that roughly half of the explicit barriers in core kernel code
might be so replaced.

[Changelog by PaulMck]
Reviewed-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20131213150640.908486364@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

We're going to be adding a few new barrier primitives, and in order to
avoid endless duplication make more agressive use of
asm-generic/barrier.h.

Change the asm-generic/barrier.h such that it allows partial barrier
definitions and fills out the rest with defaults.

There are a few architectures (m32r, m68k) that could probably
do away with their barrier.h file entirely but are kept for now due to
their unconventional nop() implementation.
Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Reviewed-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131213150640.846368594@infradead.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Sasha Levin found a NULL pointer dereference that is due to a missing
page table lock, which in turn is due to the pmd entry in question being
a transparent huge-table entry.

The code - introduced in commit 1998cc04 ("mm: make
madvise(MADV_WILLNEED) support swap file prefetch") - correctly checks
for this situation using pmd_none_or_trans_huge_or_clear_bad(), but it
turns out that that function doesn't work correctly.

pmd_none_or_trans_huge_or_clear_bad() expected that pmd_bad() would
trigger if the transparent hugepage bit was set, but it doesn't do that
if pmd_numa() is also set. Note that the NUMA bit only gets set on real
NUMA machines, so people trying to reproduce this on most normal
development systems would never actually trigger this.

Fix it by removing the very subtle (and subtly incorrect) expectation,
and instead just checking pmd_trans_huge() explicitly.
Reported-by: NSasha Levin <sasha.levin@oracle.com>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
[ Additionally remove the now stale test for pmd_trans_huge() inside the
  pmd_bad() case - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds the include file to pull in __read_mostly on some
architectures e.g. ppc and also fixes up signatures in generic
asm.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NFrancesco Fusco <ffusco@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are a few subtle races, between change_protection_range (used by
mprotect and change_prot_numa) on one side, and NUMA page migration and
compaction on the other side.

The basic race is that there is a time window between when the PTE gets
made non-present (PROT_NONE or NUMA), and the TLB is flushed.

During that time, a CPU may continue writing to the page.

This is fine most of the time, however compaction or the NUMA migration
code may come in, and migrate the page away.

When that happens, the CPU may continue writing, through the cached
translation, to what is no longer the current memory location of the
process.

This only affects x86, which has a somewhat optimistic pte_accessible.
All other architectures appear to be safe, and will either always flush,
or flush whenever there is a valid mapping, even with no permissions
(SPARC).

The basic race looks like this:

CPU A			CPU B			CPU C

						load TLB entry
make entry PTE/PMD_NUMA
			fault on entry
						read/write old page
			start migrating page
			change PTE/PMD to new page
						read/write old page [*]
flush TLB
						reload TLB from new entry
						read/write new page
						lose data

[*] the old page may belong to a new user at this point!

The obvious fix is to flush remote TLB entries, by making sure that
pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may
still be accessible if there is a TLB flush pending for the mm.

This should fix both NUMA migration and compaction.

[mgorman@suse.de: fix build]
Signed-off-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NMel Gorman <mgorman@suse.de>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We introduce a new hashing library that is meant to be used in
the contexts where speed is more important than uniformity of the
hashed values. The hash library leverages architecture specific
implementation to achieve high performance and fall backs to
jhash() for the generic case.

On Intel-based x86 architectures, the library can exploit the crc32l
instruction, part of the Intel SSE4.2 instruction set, if the
instruction is supported by the processor. This implementation
is twice as fast as the jhash() implementation on an i7 processor.

Additional architectures, such as Arm64 provide instructions for
accelerating the computation of CRC, so they could be added as well
in follow-up work.
Signed-off-by: NFrancesco Fusco <ffusco@redhat.com>
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NThomas Graf <tgraf@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Whilst architectures may be able to do better than this (which they can,
by simply defining their own macro), this is a generic stab at a
zero_bytemask implementation for the asm-generic, big-endian
word-at-a-time implementation.

On arm64, a clz instruction is used to implement the fls efficiently.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While hunting a preemption issue with Alexander, Ben noticed that the
currently generic PREEMPT_NEED_RESCHED stuff is horribly broken for
load-store architectures.

We currently rely on the IPI to fold TIF_NEED_RESCHED into
PREEMPT_NEED_RESCHED, but when this IPI lands while we already have
a load for the preempt-count but before the store, the store will erase
the PREEMPT_NEED_RESCHED change.

The current preempt-count only works on load-store archs because
interrupts are assumed to be completely balanced wrt their preempt_count
fiddling; the previous preempt_count load will match the preempt_count
state after the interrupt and therefore nothing gets lost.

This patch removes the PREEMPT_NEED_RESCHED usage from generic code and
pushes it into x86 arch code; the generic code goes back to relying on
TIF_NEED_RESCHED.

Boot tested on x86_64 and compile tested on ppc64.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-and-Tested-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131128132641.GP10022@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add return value documentation and clarify the units of the @size
parameter.
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This patch exports the gpiod_* family of API functions, a safer
alternative to the legacy GPIO interface. Differences between the gpiod
and legacy gpio APIs are:

- gpio works with integers, whereas gpiod operates on opaque handlers
  which cannot be forged or used before proper acquisition
- gpiod get/set functions are aware of the active low state of a GPIO
- gpio consumers should now include <linux/gpio/consumer.h> to access
  the new interface, whereas chips drivers will use
  <linux/gpio/driver.h>

The legacy gpio API is now built as inline functions on top of gpiod.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This adds the .init_array section as yet another section with constructors. This
is needed because gcc could add __gcov_init calls to .init_array or .ctors
section, depending on gcc (and binutils) version .

v2: - reuse mod->ctors for .init_array section for modules, because gcc uses
      .ctors or .init_array, but not both at the same time
v3: - fail to load if that does happen somehow.
Signed-off-by: NFrantisek Hrbata <fhrbata@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This patch adds the infrastructure required to register non-linear gpio
ranges through gpiolib and the standard GPIO device tree bindings.
Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

It is currently often possible in many GPIO drivers to request
a GPIO line to be used as IRQ after calling gpio_to_irq() and,
as the gpiolib is not aware of this, set the same line to
output and start driving it, with undesired side effects.

As it is a bogus usage scenario to request a line flagged as
output to used as IRQ, we introduce APIs to let gpiolib track
the use of a line as IRQ, and also set this flag from the
userspace ABI.

The API is symmetric so that lines can also be flagged from
.irq_enable() and unflagged from IRQ by .irq_disable().
The debugfs file is altered so that we see if a line is
reserved for IRQ.

Cc: Enric Balletbo i Serra <eballetbo@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>