This simple patch adds the firmware feature for VPHN to the firmware
features bitmask.
Signed-off-by: NJesse Larrew <jlarrew@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need to have three of them.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On Tue, 2 Nov 2010, Michael Ellerman wrote:

> On Mon, 2010-11-01 at 22:20 +0100, Jesper Juhl wrote:
> > Hi Stephen,
> >
> > On Tue, 2 Nov 2010, Stephen Rothwell wrote:
> >
> > > On Mon, 1 Nov 2010 21:06:23 +0100 (CET) Jesper Juhl <jj@chaosbits.net> wrote:
> > > >
> > > > Remove unused function 'mf_getSrcHistory' (that will never be used ever
> > > > according to Stephen Rothwell).
> > > >
> > > > Signed-off-by: Jesper Juhl <jj@chaosbits.net>
> > >
> > > Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
> > >
> >
> > Ok, so if you are the (unofficial) iSeries maintainer and you don't merge
> > the patch somewhere that'll eventually go up-stream, but just ACK it
> > (thank you for that btw), then where do I send it to get it merged?
>
> Here. ie. linuxppc-dev.
>
> But, while you're removing it you should remove the #if 0'ed callsite as
> well, see mf_src_proc_show() in that file. :)
>
Done. See patch below.

Remove unused function 'mf_getSrcHistory' (that will never be used
ever according to Stephen Rothwell) and also remove most of (under 'if
0') code from mf_src_proc_show() where the function was called.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Hi,

We can get rid of a memset in
arch/powerpc/platforms/cell/spufs/lscsa_alloc.c::spu_alloc_lscsa_std() by
using vzalloc() rather than vmalloc()+memset().

Completely untested patch below since I have no hardware nor tools to
compile this.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Add a function to get the maximum address that can be hotplug added.
This is needed to calculate the size of the tce table needed to cover
all memory in 1:1 mode.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Also add a comment to dev_archdata, indicating that changes there need
to be verified against the driver code.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need to initialize per-cpu pointer to NULL, it is the default.

Direct dma ops and no setup are the defaults, no need to set for
iommu-off.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need to set the device tree device_node pci node iommu pointer, its
only used for dlpar remove.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

direct_dma_ops is the default pci dma ops.

No need to call a function to get the pci dma ops, we know they are the
dma_direct_ops.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

No need for empty helpers with iommu off, the ppc_md hooks are optional.

The direct_dma_ops are the default pci_dma_ops, so no need to set in the
them iommu off case.

No need to set the device tree device_node pci node iommu pointer, its
only used for dlpar remove.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use the set_dma_ops helper. Instead of modifying vio_dma_mapping_ops,
just create a trivial wrapper for dma_supported.
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The following warning is seen while compilation of PowerPC kernel:

 CC      drivers/rtc/rtc-cmos.o
drivers/rtc/rtc-cmos.c:697:2: warning: #warning Assuming 128 bytes
of RTC+NVRAM address space, not 64 bytes.

Fix it by adding defined(__powerpc__).
Signed-off-by: NSrikanth Krishnakar <skrishna@mvista.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Create sysfs interface to export data from H_BEST_ENERGY hcall
that can be used by administrative tools on supported pseries
platforms for energy management	optimizations.

sys/device/system/cpu/pseries_(de)activate_hint_list and
sys/device/system/cpu/cpuN/pseries_(de)activate_hint will provide
hints for activation and deactivation of cpus respectively.

These hints are abstract number given by the hypervisor based
on the extended knowledge the hypervisor has regarding the
system topology and resource mappings.

The activate and the deactivate sysfs entry is for the two
distinct operations that we could do for energy savings.  When
we have more capacity than required, we could deactivate few
core to save energy.  The choice of the core to deactivate
will be based on /sys/devices/system/cpu/deactivate_hint_list.
The comma separated list of cpus (cores) will be the preferred
choice.  If we have to activate some of the deactivated cores,
then /sys/devices/system/cpu/activate_hint_list will be used.

The per-cpu file
/sys/device/system/cpu/cpuN/pseries_(de)activate_hint further
provide more fine grain information by exporting the value of
the hint itself.

Added new driver module
	arch/powerpc/platforms/pseries/pseries_energy.c
under new config option CONFIG_PSERIES_ENERGY
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These APIs take logical cpu number as input
Change cpu_first_thread_in_core() to cpu_first_thread_sibling()
Change cpu_last_thread_in_core() to cpu_last_thread_sibling()

These APIs convert core number (index) to logical cpu/thread numbers
Add cpu_first_thread_of_core(int core)
Changed cpu_thread_to_core() to cpu_core_index_of_thread(int cpu)

The goal is to make 'threads_per_core' accessible to the
pseries_energy module.  Instead of making an API to read
threads_per_core, this is a higher level wrapper function to
convert from logical cpu number to core number.

The current APIs cpu_first_thread_in_core() and
cpu_last_thread_in_core() returns logical CPU number while
cpu_thread_to_core() returns core number or index which is
not a logical CPU number.  The new APIs are now clearly named to
distinguish 'core number' versus first and last 'logical cpu
number' in that core.

The new APIs cpu_{first,last}_thread_sibling() work on
logical cpu numbers.  While cpu_first_thread_of_core() and
cpu_core_index_of_thread() work on core index.

Example usage:  (4 threads per core system)

cpu_first_thread_sibling(5) = 4
cpu_last_thread_sibling(5) = 7
cpu_core_index_of_thread(5) = 1
cpu_first_thread_of_core(1) = 4

cpu_core_index_of_thread() is used in cpu_to_drc_index() in the
module and cpu_first_thread_of_core() is used in
drc_index_to_cpu() in the module.

Make API changes to few callers.  Export symbols for use in modules.
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This introduces a pair of kernel parameters that can be used to disable
the MULTITCE and BULK_REMOVE h-calls.

By default, those hcalls are enabled, active, and good for throughput
and performance.  The ability to disable them will be useful for some of
the PREEMPT_RT related investigation and work occurring on Power.
Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
cc: Olof Johansson <olof@lixom.net>
cc: Anton Blanchard <anton@samba.org>
cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NJoe Perches <joe@perches.com>
Reviewed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The __KERNEL__ ifdef isn't necessary at this point, because it is
checked in an outer ifdef level already and has no effect here.
Signed-off-by: NChristian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The crashkernel region will almost always overlap RTAS. If we free the
crashkernel region via "echo 0 > /sys/kernel/kexec_crash_size" then we will
free RTAS and the machine will crash in confusing and exciting ways.

Override crash_free_reserved_phys_range and check for overlap with RTAS.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

POWER5 added popcntb, and POWER7 added popcntw and popcntd. As a first step
this patch does all the work out of line, but it would be nice to implement
them as inlines with an out of line fallback.

The performance issue with hweight was noticed when disabling SMT on a large
(192 thread) POWER7 box. The patch improves that testcase by about 8%.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This avoids some include-file hell, and the function isn't really
important enough to be inlined anyway.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

And in particular, use it in 'pipe_fcntl()'.

The other pipe functions do not need to use the 'careful' version, since
they are only ever called for things that are already known to be pipes.

The normal read/write/ioctl functions are called through the file
operations structures, so if a file isn't a pipe, they'd never get
called.  But pipe_fcntl() is special, and called directly from the
generic fcntl code, and needs to use the same careful function that the
splice code is using.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

.. and change it to take the 'file' pointer instead of an inode, since
that's what all users want anyway.

The renaming is preparatory to exporting it to other users.  The old
'pipe_info()' name was too generic and is already used elsewhere, so
before making the function public we need to use a more specific name.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix the software context switch counter
  perf, x86: Fixup Kconfig deps
  x86, perf, nmi: Disable perf if counters are not accessible
  perf: Fix inherit vs. context rotation bug

* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: net: throttle TX queue before running out of tlabels
  firewire: net: replace lists by counters
  firewire: net: fix memory leaks
  firewire: net: count stats.tx_packets and stats.tx_bytes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (30 commits)
  ALSA: hda - Use ALC_INIT_DEFAULT for really default initialization
  ASoC: Fix resource reclaim for osk5912
  ASoC: tlv320aic3x - fix variable may be used uninitialized warning
  ASoC: davinci-vcif - fix a memory leak
  ASoC: phycore-ac97: fix resource leak
  ASoC: imx-ssi: fix resource leak
  ASoC: simone: fix resource leak in simone_init error path
  ASoC: sam9g20_wm8731: fix resource leak in at91sam9g20ek_init error path
  ASoC: snd-soc-afeb9260: remove unneeded platform_device_del in error path
  ASoC: pcm030-audio-fabric: fix resource leak in pcm030_fabric_init error path
  ASoC: efika-audio-fabric: fix resource leak in efika_fabric_init error path
  ASoC: Call snd_soc_unregister_dais instead of snd_soc_unregister_dai in sh4_soc_dai_remove
  ASoC: fix SND_PXA2XX_LIB Kconfig warning
  ALSA: hda - Fix ALC660-VD/ALC861-VD capture/playback mixers
  ALSA: HDA: Add an extra DAC for Realtek ALC887-VD
  ASoC: nuc900-ac97: fix a memory leak
  ASoC: Return proper error for omap3pandora_soc_init
  ASoC: wm8961 - clear WM8961_MCLKDIV bit for freq <= 16500000
  ASoC: wm8961 - clear WM8961_DACSLOPE bit for normal mode
  ALSA: hda - Fix Acer 7730G support
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure we return the dirent->d_type when it is known
  NFS: Correct the array bound calculation in nfs_readdir_add_to_array
  NFS: Don't ignore errors from nfs_do_filldir()
  NFS: Fix the error handling in "uncached_readdir()"
  NFS: Fix a page leak in uncached_readdir()
  NFS: Fix a page leak in nfs_do_filldir()
  NFS: Assume eof if the server returns no readdir records
  NFS: Buffer overflow in ->decode_dirent() should not be fatal
  Pure nfs client performance using odirect.
  SUNRPC: Fix an infinite loop in call_refresh/call_refreshresult

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: release locks in check_corruption

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix-cpu-timers: Rcu_read_lock/unlock protect find_task_by_vpid call

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dmar, x86: Use function stubs when CONFIG_INTR_REMAP is disabled
  x86-64: Fix and clean up AMD Fam10 MMCONF enabling
  x86: UV: Address interrupt/IO port operation conflict
  x86: Use online node real index in calulate_tbl_offset()
  x86, asm: Fix binutils 2.15 build failure

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Remove incorrect open-coded container_of()
  perf record: Handle restrictive permissions in /proc/{kallsyms,modules}
  x86/kprobes: Prevent kprobes to probe on save_args()
  irq_work: Drop cmpxchg() result
  perf: Fix owner-list vs exit
  x86, hw_nmi: Move backtrace_mask declaration under ARCH_HAS_NMI_WATCHDOG
  tracing: Fix recursive user stack trace
  perf,hw_breakpoint: Initialize hardware api earlier
  x86: Ignore trap bits on single step exceptions
  tracing: Force arch_local_irq_* notrace for paravirt
  tracing: Fix module use of trace_bprintk()

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix idle balancing
  sched: Fix volanomark performance regression

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] qdio: free indicator after reset is finished
  [S390] nmi: fix clock comparator revalidation

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix build for PROC_FS disabled
  block: fix amiga and atari floppy driver compile warning
  blk-throttle: Fix calculation of max number of WRITES to be dispatched
  ioprio: grab rcu_read_lock in sys_ioprio_{set,get}()
  xen/blkfront: cope with backend that fail empty BLKIF_OP_WRITE_BARRIER requests
  xen/blkfront: Implement FUA with BLKIF_OP_WRITE_BARRIER
  xen/blkfront: change blk_shadow.request to proper pointer
  xen/blkfront: map REQ_FLUSH into a full barrier

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: clock-sh7372: remove bogus pllc2 clock toggling.
  ARM: mach-shmobile: clock-sh7372: remove unnecessary fsi clocks
  ARM: mach-shmobile: clock-sh7372: modify error code
  ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642
  ARM: mach-shmobile: ap4evb: FSI clock use proper process for HDMI
  ARM: mach-shmobile: clock-sh7372: remove fsidiv bogus disable
  ARM: mach-shmobile: sh7372 USB0/IIC1 MSTP fix

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sdhci: 8-bit bus width changes
  mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD
  mmc: sdio: fix nasty oops in mmc_sdio_detect
  mmc: omap4: hsmmc: Fix improper card detection while booting
  mmc: fix rmmod race for hosts using card-detection polling
  mmc: sdhci: Fix crash on boot with C0 stepping Moorestown platforms
  mmc: sdhci-esdhc-imx: enable QUIRK_NO_MULTIBLOCK only for i.MX25 and i.MX35
  mmc: sdhci-esdhc-imx: fix timeout on i.MX's sdhci
  mmc: sdhci: Properly enable SDIO IRQ wakeups
  mmc: ushc: Return proper error code for ushc_probe()
  mmc: Fix printing of card DDR type

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix sysdev related warning messages
  ARM: S3C24XX: Fix UART3 submask on S3C2416 and S3C2443
  ARM: S3C24XX: Fix Demux error in UART3 irqs on S3C2443 and S3C2416
  ARM: S3C64XX: fix uart clock setup for mini6410/real6410
  ARM: S3C24XX: Fix wrong s3c_gpio_cfgpull
  ARM: S3C2410: Adapt h1940-bluetooth to gpiolib changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix typo in comment of nilfs_dat_move function
  nilfs2: nilfs_iget_for_gc() returns ERR_PTR