- 01 7月, 2008 20 次提交
-
-
由 Ron Rindjunsky 提交于
This patch removes the use of lq_ready, once used to sync between link quality commands to avoid race conditions, but no longer needed as bss_info_changed is in use. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch moves Rx aggregation functions into iwl-rx.c Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch sets the compressed BA handler for 5000. This allows the rate scaling algorithm to take in count frames that were sent in AMPDUs. The compressed BA handler has been moved to iwl-rx.c since it is common to 4965 and 5000. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
The iwlwifi drivers go to great lengths to avoid passing packets to mac80211 they think shouldn't go there, while mac80211 can (of course!) handle them very well. Especially in the case of duplicate packets this is interesting because it's such a performance hog (especially for IBSS networks) while mac80211 does that work on the side without much effort. This patch removes all that and leaves only what is absolutely necessary for the hardware. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch moves RX handlers to iwl-rx.c Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch avoids sending REPLY_REMOVE_ALL_STA in down flow, this avoids a meaningless warning from being printed On the way this patch also renames the the function to iwl_clear_stations_table Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch moves RX stats flow to core modules, and moves temperature calibration to handler since it is not needed in 5000. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch fixes a bug in association flow. As soon as RXON with assoc bit is sent, uCode expects to have an entry in its station table that describe the AP. Receiving a beacon from an HT AP before sending ADD_STA results a uCode error. This patch sends first the ADD_STA (bcast and bssid) and only then RXON with assoc bit set Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch adds REPLY_TX_POWER_DBM_CMD to get_cmd_string. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch add uses of iwl_is_associated in places it is suitable in. Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
This patch makes the station table maintenance safer. Two flags are maintained: 1) if station is present in driver 2) if station is present in uCode This will allow us in the future to deal with more stations than the firmware allows. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch adds eeprom version display into device/version sysfs file /sys/class/net/wlanX/devices/version Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gregory Greenman 提交于
This patch configures uCode to use open loop tx power algorithm via TX_POWER_DBM (0x98) host command. Signed-off-by: NGregory Greenman <gregory.greenman@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adel Gadllah 提交于
This patch sets the rfkill state to RFKILL_STATE_HARD_BLOCKED when the radio is killed by the hardware switch. Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adel Gadllah 提交于
This patch removes the usage RFKILL_STATE_ON and uses RFKILL_STATE_UNBLOCKED instead. Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Provide MAC time, rate, channel, signal and noise. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Don't try to skip any headers in hostap_80211_header_parse(). We never use that function for interfaces affected by local->monitor_type. Both the master and the AP interface receive 802.11 frames without any additional headers. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adel Gadllah 提交于
This patch fixes the rfkill deps for iwl4965/5000 and removes the input device usage. Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
Correct typo introduced by "wireless: remove RFKILL_STATE_HARD_BLOCKED warnings". Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 6月, 2008 14 次提交
-
-
由 Jeff Garzik 提交于
synchronize_irq() is superfluous when free_irq() call immediately follows it, because free_irq() also does a synchronize_irq() call of its own. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Garzik 提交于
Clean up config/burst value arch-specific setup. * bcrvalue only varied by its big-endian bit * crvalue only varied for certain types of x86-32 chips This should make fealnx quite a bit more portable, without any behavior change. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Harvey Harrison 提交于
DE_UNALIGNED_16 is always being passed a u16 *, no need to have the wrapper with two casts in it, just call get_unaligned directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Tobias Diedrich 提交于
We currently don't signal the kernel we that this device can wake the system. Call device_init_wakeup() to correct this. Without this device_can_wakeup and device_may_wakeup will return incorrect values. Together with the minimized acpi wakeup patch (6/4 ;)), which will follow in the next mail, this really makes wake-on-lan work for me as expected (i.e. "ethtool -s eth0 wol g" is sufficient, no additional magic needed). Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Márton Németh 提交于
Clean up the following errors and warnings reported by checkpatch.pl: + ERROR: Macros with complex values should be enclosed in parenthesis + WARNING: __func__ should be used instead of gcc specific __FUNCTION__ + WARNING: plain inline is preferred over __inline__ + WARNING: Use #include <linux/io.h> instead of <asm/io.h> + WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> The changes were verified with by comparing the "objdump -d 8139too.ko" output which is exactly the same for the old and new version in case of config CONFIG_8139TOO=m, CONFIG_8139TOO_PIO=n, CONFIG_8139TOO_TUNE_TWISTER=n, CONFIG_8139TOO_8129=n, CONFIG_8139_OLD_RX_RESET=n. Software versions used: gcc 4.2.3, objdump 2.18.0.20080103, on elf32-i386. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jussi Kivilinna 提交于
Pass buffer length to rndis_command so that rndis_command can read full response buffer from device instead of max CONTROL_BUFFER_SIZE bytes. Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Nobuhiro Iwamatsu 提交于
Fix compile error on sh_eth and remove base address macro. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Andy Gospodarek 提交于
The call to e1000_clean_tx_irq in e1000_netpoll can race with the call to e1000_clean_tx_irq in e1000_clean. With a small bit of tweaking to to netpoll_send_skb to simulate a system that was under extreme stress, I was able to reproduce these concurrent calls. This can result in multiple frees to the skbs on the tx ring buffer. Dropping this call from e1000_netpoll should be fine since we can rely on the calls in e1000_clean to do what is needed since napi will poll the hardware just after calling poll_controller. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Taku Izumi 提交于
This patch makes igb driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Taku Izumi 提交于
This patch makes e1000e driver ioport-free. This corrects behavior in probe function so as not to request ioport resources as long as they are not really needed. Signed-off-by: NTaku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Auke Kok 提交于
We do not want to prolong the situation much longer that e1000 and e1000e support these devices at the same time. As a result, take out the bandage that was added for the interim period and remove all the PCI Express device IDs from e1000. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Andre Haupt 提交于
Signed-off-by: NAndre Haupt <andre@bitwigglers.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
clock is already cpu-endian (see le32_to_cpu slightly before), so le64_to_cpu doesn't make much sense. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
This fixes a circular locking dependency in the workqueue handling. The interface work task uses the mac80211 function ieee80211_iterate_active_interfaces() which grabs the RTNL lock. However when the interface is brough down, this happens under the RTNL lock as well, this causes problems because mac80211 will flush the workqueue during the ifdown event. This causes mac80211 to wait until the driver has completed all work which can't finish because it is waiting on the RTNL lock. This is fixed by moving rt2x00 workqueue tasks on a different workqueue, this workqueue can be flushed when the ieee80211_hw structure is removed by the driver (when the driver is unloaded) which does not happen under the RTNL lock. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 6月, 2008 6 次提交
-
-
由 John W. Linville 提交于
CC [M] drivers/net/wireless/b43/rfkill.o drivers/net/wireless/b43/rfkill.c: In function ‘b43_rfkill_soft_toggle’: drivers/net/wireless/b43/rfkill.c:90: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch CC [M] drivers/net/wireless/b43legacy/rfkill.o drivers/net/wireless/b43legacy/rfkill.c: In function ‘b43legacy_rfkill_soft_toggle’: drivers/net/wireless/b43legacy/rfkill.c:92: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch CC [M] drivers/net/wireless/iwlwifi/iwl-rfkill.o drivers/net/wireless/iwlwifi/iwl-rfkill.c: In function ‘iwl_rfkill_soft_rf_kill’: drivers/net/wireless/iwlwifi/iwl-rfkill.c:56: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch Also handle RFKILL_STATE_{ON,OFF} -> RFKILL_STATE_{UNBLOCKED,SOFT_BLOCKED} conversion since I'm already here... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
CC [M] drivers/net/wireless/ath5k/base.o drivers/net/wireless/ath5k/base.c: In function ‘ath5k_tx’: drivers/net/wireless/ath5k/base.c:2598: warning: unused variable ‘info’ Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Machek 提交于
Small whitespace cleanups for wireless drivers Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Fix iwlwifi so that it builds cleanly with CONFIG_INPUT=n. Also free the input device on exit. drivers/built-in.o: In function `iwl_rfkill_unregister': (.text+0xbf430): undefined reference to `input_unregister_device' drivers/built-in.o: In function `iwl_rfkill_init': (.text+0xbf51c): undefined reference to `input_allocate_device' drivers/built-in.o: In function `iwl_rfkill_init': (.text+0xbf5bf): undefined reference to `input_register_device' drivers/built-in.o: In function `iwl_rfkill_init': (.text+0xbf5e9): undefined reference to `input_free_device' net/built-in.o: In function `rfkill_disconnect': rfkill-input.c:(.text+0xe71e1): undefined reference to `input_close_device' rfkill-input.c:(.text+0xe71e9): undefined reference to `input_unregister_handle' net/built-in.o: In function `rfkill_connect': rfkill-input.c:(.text+0xe723e): undefined reference to `input_register_handle' rfkill-input.c:(.text+0xe724d): undefined reference to `input_open_device' rfkill-input.c:(.text+0xe725c): undefined reference to `input_unregister_handle' net/built-in.o: In function `rfkill_handler_init': rfkill-input.c:(.init.text+0x36ec): undefined reference to `input_register_handler' net/built-in.o: In function `rfkill_handler_exit': rfkill-input.c:(.exit.text+0x112c): undefined reference to `input_unregister_handler' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This fixes a clobber of the skb that was introduced by the tx_control->cb conversion patches. This bug causes a crash when the skb destructor is invoked. That happens on skb_orphan or skb_kfree. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
During rt2x00usb_disable_radio() all pending urb's should be killed and not only those from the RX queue. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-