- 28 4月, 2016 1 次提交
-
-
由 David S. Miller 提交于
The system call tracing bug fix mentioned in the Fixes tag below increased the amount of assembler code in the sequence of assembler files included by head_64.S This caused to total set of code to exceed 0x4000 bytes in size, which overflows the expression in head_64.S that works to place swapper_tsb at address 0x408000. When this is violated, the TSB is not properly aligned, and also the trap table is not aligned properly either. All of this together results in failed boots. So, do two things: 1) Simplify some code by using ba,a instead of ba/nop to get those bytes back. 2) Add a linker script assertion to make sure that if this happens again the build will fail. Fixes: 1a40b953 ("sparc: Fix system call tracing register handling.") Reported-by: NMeelis Roos <mroos@linux.ee> Reported-by: NJoerg Abraham <joerg.abraham@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2016 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The default remains 127, which is good for most cases, and not even hit most of the time, but then for some cases, as reported by Brendan, 1024+ deep frames are appearing on the radar for things like groovy, ruby. And in some workloads putting a _lower_ cap on this may make sense. One that is per event still needs to be put in place tho. The new file is: # cat /proc/sys/kernel/perf_event_max_stack 127 Chaging it: # echo 256 > /proc/sys/kernel/perf_event_max_stack # cat /proc/sys/kernel/perf_event_max_stack 256 But as soon as there is some event using callchains we get: # echo 512 > /proc/sys/kernel/perf_event_max_stack -bash: echo: write error: Device or resource busy # Because we only allocate the callchain percpu data structures when there is a user, which allows for changing the max easily, its just a matter of having no callchain users at that point. Reported-and-Tested-by: NBrendan Gregg <brendan.d.gregg@gmail.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NDavid Ahern <dsahern@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/20160426002928.GB16708@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 22 4月, 2016 5 次提交
-
-
由 Khalid Aziz 提交于
Add code to recognize SPARC-Sonoma cpu correctly and update cpu hardware caps and cpu distribution map. SPARC-Sonoma is based upon SPARC-M7 core along with additional PCI functions added on and is reported by firmware as "SPARC-SN". Signed-off-by: NKhalid Aziz <khalid.aziz@oracle.com> Acked-by: NAllen Pais <allen.pais@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Glaubitz 提交于
Signed-off-by: NJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Glaubitz 提交于
Signed-off-by: NJohn Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The function pcibios_add_device() added by commit d0c31e02 ("sparc/PCI: Fix for panic while enabling SR-IOV") initializes the dev_archdata by doing a memcpy from the PF. This has the problem that it erroneously copies the OF device without explicitly refcounting it. As David Miller pointed out: "Generally speaking we don't really support hot-plug for OF probed devices, but if we did all of the device tree pointers have to be refcounted properly." To fix this error, and also avoid code duplication, this patch creates a new helper function, pci_init_dev_archdata(), that initializes the fields in dev_archdata, and can be invoked by callers after they have taken the needed refcounts Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: NBabu Moger <babu.moger@oracle.com> Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Borislav Petkov 提交于
Option is long gone, see 5d9efa7e ("ipv6: Remove privacy config option.") Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: sparclinux@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2016 2 次提交
-
-
由 Michal Hocko 提交于
sparc basically reuses the generic implementation of rwsem so we can reuse the code rather than duplicate it. Signed-off-by: NMichal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Zankel <chris@zankel.net> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Signed-off-by: Jason Low <jason.low2@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1460041951-22347-6-git-send-email-mhocko@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Michal Hocko 提交于
This is no longer used anywhere and all callers (__down_write()) use 0 as a subclass. Ditch __down_write_nested() to make the code easier to follow. This shouldn't introduce any functional change. Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NDavidlohr Bueso <dave@stgolabs.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Zankel <chris@zankel.net> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Signed-off-by: Jason Low <jason.low2@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-alpha@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1460041951-22347-2-git-send-email-mhocko@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 30 3月, 2016 2 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Babu Moger 提交于
We noticed this panic while enabling SR-IOV in sparc. mlx4_core: Mellanox ConnectX core driver v2.2-1 (Jan 1 2015) mlx4_core: Initializing 0007:01:00.0 mlx4_core 0007:01:00.0: Enabling SR-IOV with 5 VFs mlx4_core: Initializing 0007:01:00.1 Unable to handle kernel NULL pointer dereference insmod(10010): Oops [#1] CPU: 391 PID: 10010 Comm: insmod Not tainted 4.1.12-32.el6uek.kdump2.sparc64 #1 TPC: <dma_supported+0x20/0x80> I7: <__mlx4_init_one+0x324/0x500 [mlx4_core]> Call Trace: [00000000104c5ea4] __mlx4_init_one+0x324/0x500 [mlx4_core] [00000000104c613c] mlx4_init_one+0xbc/0x120 [mlx4_core] [0000000000725f14] local_pci_probe+0x34/0xa0 [0000000000726028] pci_call_probe+0xa8/0xe0 [0000000000726310] pci_device_probe+0x50/0x80 [000000000079f700] really_probe+0x140/0x420 [000000000079fa24] driver_probe_device+0x44/0xa0 [000000000079fb5c] __device_attach+0x3c/0x60 [000000000079d85c] bus_for_each_drv+0x5c/0xa0 [000000000079f588] device_attach+0x88/0xc0 [000000000071acd0] pci_bus_add_device+0x30/0x80 [0000000000736090] virtfn_add.clone.1+0x210/0x360 [00000000007364a4] sriov_enable+0x2c4/0x520 [000000000073672c] pci_enable_sriov+0x2c/0x40 [00000000104c2d58] mlx4_enable_sriov+0xf8/0x180 [mlx4_core] [00000000104c49ac] mlx4_load_one+0x42c/0xd40 [mlx4_core] Disabling lock debugging due to kernel taint Caller[00000000104c5ea4]: __mlx4_init_one+0x324/0x500 [mlx4_core] Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core] Caller[0000000000725f14]: local_pci_probe+0x34/0xa0 Caller[0000000000726028]: pci_call_probe+0xa8/0xe0 Caller[0000000000726310]: pci_device_probe+0x50/0x80 Caller[000000000079f700]: really_probe+0x140/0x420 Caller[000000000079fa24]: driver_probe_device+0x44/0xa0 Caller[000000000079fb5c]: __device_attach+0x3c/0x60 Caller[000000000079d85c]: bus_for_each_drv+0x5c/0xa0 Caller[000000000079f588]: device_attach+0x88/0xc0 Caller[000000000071acd0]: pci_bus_add_device+0x30/0x80 Caller[0000000000736090]: virtfn_add.clone.1+0x210/0x360 Caller[00000000007364a4]: sriov_enable+0x2c4/0x520 Caller[000000000073672c]: pci_enable_sriov+0x2c/0x40 Caller[00000000104c2d58]: mlx4_enable_sriov+0xf8/0x180 [mlx4_core] Caller[00000000104c49ac]: mlx4_load_one+0x42c/0xd40 [mlx4_core] Caller[00000000104c5f90]: __mlx4_init_one+0x410/0x500 [mlx4_core] Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core] Caller[0000000000725f14]: local_pci_probe+0x34/0xa0 Caller[0000000000726028]: pci_call_probe+0xa8/0xe0 Caller[0000000000726310]: pci_device_probe+0x50/0x80 Caller[000000000079f700]: really_probe+0x140/0x420 Caller[000000000079fa24]: driver_probe_device+0x44/0xa0 Caller[000000000079fb08]: __driver_attach+0x88/0xa0 Caller[000000000079d90c]: bus_for_each_dev+0x6c/0xa0 Caller[000000000079f29c]: driver_attach+0x1c/0x40 Caller[000000000079e35c]: bus_add_driver+0x17c/0x220 Caller[00000000007a02d4]: driver_register+0x74/0x120 Caller[00000000007263fc]: __pci_register_driver+0x3c/0x60 Caller[00000000104f62bc]: mlx4_init+0x60/0xcc [mlx4_core] Kernel panic - not syncing: Fatal exception Press Stop-A (L1-A) to return to the boot prom ---[ end Kernel panic - not syncing: Fatal exception Details: Here is the call sequence virtfn_add->__mlx4_init_one->dma_set_mask->dma_supported The panic happened at line 760(file arch/sparc/kernel/iommu.c) 758 int dma_supported(struct device *dev, u64 device_mask) 759 { 760 struct iommu *iommu = dev->archdata.iommu; 761 u64 dma_addr_mask = iommu->dma_addr_mask; 762 763 if (device_mask >= (1UL << 32UL)) 764 return 0; 765 766 if ((device_mask & dma_addr_mask) == dma_addr_mask) 767 return 1; 768 769 #ifdef CONFIG_PCI 770 if (dev_is_pci(dev)) 771 return pci64_dma_supported(to_pci_dev(dev), device_mask); 772 #endif 773 774 return 0; 775 } 776 EXPORT_SYMBOL(dma_supported); Same panic happened with Intel ixgbe driver also. SR-IOV code looks for arch specific data while enabling VFs. When VF device is added, driver probe function makes set of calls to initialize the pci device. Because the VF device is added different way than the normal PF device(which happens via of_create_pci_dev for sparc), some of the arch specific initialization does not happen for VF device. That causes panic when archdata is accessed. To fix this, I have used already defined weak function pcibios_setup_device to copy archdata from PF to VF. Also verified the fix. Signed-off-by: NBabu Moger <babu.moger@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: NEthan Zhao <ethan.zhao@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 3月, 2016 1 次提交
-
-
由 Alexander Potapenko 提交于
KASAN needs to know whether the allocation happens in an IRQ handler. This lets us strip everything below the IRQ entry point to reduce the number of unique stack traces needed to be stored. Move the definition of __irq_entry to <linux/interrupt.h> so that the users don't need to pull in <linux/ftrace.h>. Also introduce the __softirq_entry macro which is similar to __irq_entry, but puts the corresponding functions to the .softirqentry.text section. Signed-off-by: NAlexander Potapenko <glider@google.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 3月, 2016 2 次提交
-
-
由 Andy Lutomirski 提交于
Sparc's syscall_get_arch was buggy: it returned the task arch, not the syscall arch. This could confuse seccomp and audit. I don't think this is as bad for seccomp as it looks: sparc's 32-bit and 64-bit syscalls are numbered the same. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Lutomirski 提交于
On sparc64 compat-enabled kernels, any task can make 32-bit and 64-bit syscalls. is_compat_task returns true in 32-bit tasks, which does not necessarily imply that the current syscall is 32-bit. Provide an in_compat_syscall implementation that checks whether the current syscall is compat. As far as I know, sparc is the only architecture on which is_compat_task checks the compat status of the task and on which the compat status of a syscall can differ from the compat status of the task. On x86, is_compat_task checks the syscall type, not the task type. [akpm@linux-foundation.org: add comment, per Sam] [akpm@linux-foundation.org: update comment, per Andy] Signed-off-by: NAndy Lutomirski <luto@kernel.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 3月, 2016 2 次提交
-
-
由 Joe Perches 提交于
Use the more normal kernel definition/declaration style. Done via: $ git ls-files arch/sparc | \ xargs ./scripts/checkpatch.pl -f --fix-inplace --types=unspecified_int Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adam Buchbinder 提交于
Signed-off-by: NAdam Buchbinder <adam.buchbinder@gmail.com> Reviewed-by: NJulian Calaby <julian.calaby@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2016 1 次提交
-
-
由 Aaron Young 提交于
Add ldmvsw.c driver Details: The ldmvsw driver very closely follows the sunvnet.c code and makes use of the sunvnet_common.c code for core functionality. A significant difference between sunvnet and ldmvsw driver is sunvnet creates a network interface for each vnet-port *parent* node in the MD while the ldmvsw driver creates a network interface for every vsw-port node in the Machine Description (MD). Therefore the netdev_priv() for sunvnet is a vnet structure while the netdev_priv() for ldmvsw is a vnet_port structure. Vnet_port structures allocated by ldmvsw have the vsw bit set. When finding the net_device associated with a port, the common code keys off this bit to use either the net_device found in the vnet_port or the net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in sunvnet_common.h). This scheme allows the common code to work with both drivers with minimal changes. Similar to Xen, network interfaces created by the ldmvsw driver will always have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be assigned the devname "vif<cfg_handle>.<port_id>" - where <cfg_handle> and <port_id> are a unique handle/port pair assigned to the associated vsw-port node in the MD. Signed-off-by: NAaron Young <aaron.young@oracle.com> Signed-off-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com> Reviewed-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: NAlexandre Chartre <Alexandre.Chartre@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 3月, 2016 1 次提交
-
-
由 Kirill A. Shutemov 提交于
There are few things about *pte_alloc*() helpers worth cleaning up: - 'vma' argument is unused, let's drop it; - most __pte_alloc() callers do speculative check for pmd_none(), before taking ptl: let's introduce pte_alloc() macro which does the check. The only direct user of __pte_alloc left is userfaultfd, which has different expectation about atomicity wrt pmd. - pte_alloc_map() and pte_alloc_map_lock() are redefined using pte_alloc(). [sudeep.holla@arm.com: fix build for arm64 hugetlbpage] [sfr@canb.auug.org.au: fix arch/arm/mm/mmu.c some more] Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 3月, 2016 2 次提交
-
-
由 Alexander Duyck 提交于
This patch updates csum_ipv6_magic so that it correctly recognizes that protocol is a unsigned 8 bit value. This will allow us to better understand what limitations may or may not be present in how we handle the data. For example there are a number of places that call htonl on the protocol value. This is likely not necessary and can be replaced with a multiplication by ntohl(1) which will be converted to a shift by the compiler. Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch updates all instances of csum_tcpudp_magic and csum_tcpudp_nofold to reflect the types that are usually used as the source inputs. For example the protocol field is populated based on nexthdr which is actually an unsigned 8 bit value. The length is usually populated based on skb->len which is an unsigned integer. This addresses an issue in which the IPv6 function csum_ipv6_magic was generating a checksum using the full 32b of skb->len while csum_tcpudp_magic was only using the lower 16 bits. As a result we could run into issues when attempting to adjust the checksum as there was no protocol agnostic way to update it. With this change the value is still truncated as many architectures use "(len + proto) << 8", however this truncation only occurs for values greater than 16776960 in length and as such is unlikely to occur as we stop the inner headers at ~64K in size. I did have to make a few minor changes in the arm, mn10300, nios2, and score versions of the function in order to support these changes as they were either using things such as an OR to combine the protocol and length, or were using ntohs to convert the length which would have truncated the value. I also updated a few spots in terms of whitespace and type differences for the addresses. Most of this was just to make sure all of the definitions were in sync going forward. Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 3月, 2016 1 次提交
-
-
由 Christoph Hellwig 提交于
For a long time all architectures implement the pci_dma_* functions using the generic DMA API, and they all use the same header to do so. Move this header, pci-dma-compat.h, to include/linux and include it from the generic pci.h instead of having each arch duplicate this include. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 02 3月, 2016 1 次提交
-
-
由 Thomas Gleixner 提交于
Let the non boot cpus call into idle with the corresponding hotplug state, so the hotplug core can handle the further bringup. That's a first step to convert the boot side of the hotplugged cpus to do all the synchronization with the other side through the state machine. For now it'll only start the hotplug thread and kick the full bringup of the cpu. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 01 3月, 2016 2 次提交
-
-
由 David S. Miller 提交于
Like a signal return, we should use synchronize_user_stack() rather than flush_user_windows(). Reported-by: NIlya Malakhov <ilmalakhovthefirst@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Binutils used to be (erroneously) extremely permissive about instruction usage. But that got fixed and if you don't properly tell it to accept classes of instructions it will fail. This uncovered a specs bug on sparc in gcc where it wouldn't pass the proper options to binutils options. Deal with this in the kernel build by adding -Wa,-Av8 to KBUILD_CFLAGS. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2016 1 次提交
-
-
由 Daniel Cashman 提交于
Replace calls to get_random_int() followed by a cast to (unsigned long) with calls to get_random_long(). Also address shifting bug which, in case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits. Signed-off-by: NDaniel Cashman <dcashman@android.com> Acked-by: NKees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Nick Kralevich <nnk@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 2月, 2016 1 次提交
-
-
由 Tom Herbert 提交于
This patch add the SO_CNX_ADVICE socket option (setsockopt only). The purpose is to allow an application to give feedback to the kernel about the quality of the network path for a connected socket. The value argument indicates the type of quality report. For this initial patch the only supported advice is a value of 1 which indicates "bad path, please reroute"-- the action taken by the kernel is to call dst_negative_advice which will attempt to choose a different ECMP route, reset the TX hash for flow label and UDP source port in encapsulation, etc. This facility should be useful for connected UDP sockets where only the application can provide any feedback about path quality. It could also be useful for TCP applications that have additional knowledge about the path outside of the normal TCP control loop. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2016 2 次提交
-
-
由 Dave Hansen 提交于
We will soon modify the vanilla get_user_pages() so it can no longer be used on mm/tasks other than 'current/current->mm', which is by far the most common way it is called. For now, we allow the old-style calls, but warn when they are used. (implemented in previous patch) This patch switches all callers of: get_user_pages() get_user_pages_unlocked() get_user_pages_locked() to stop passing tsk/mm so they will no longer see the warnings. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Bjorn Helgaas 提交于
asm/gpio.h is included only by linux/gpio.h, and then only when the arch selects ARCH_HAVE_CUSTOM_GPIO_H. Only the following arches select it: arm avr32 blackfin m68k (COLDFIRE only) sh unicore32. Remove the unused asm/gpio.h files for the arches that do not select ARCH_HAVE_CUSTOM_GPIO_H. This is a follow-on to 7563bbf8 ("gpiolib/arches: Centralise bolierplate asm/gpio.h"). Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 09 2月, 2016 1 次提交
-
-
由 Andrey Ryabinin 提交于
Lockdep is initialized at compile time now. Get rid of lockdep_init(). Signed-off-by: NAndrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Krinkin <krinkin.m.u@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: mm-commits@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 01 2月, 2016 1 次提交
-
-
由 wim.coekaerts@oracle.com 提交于
This driver adds sparc hypervisor watchdog support. The default timeout is 60 seconds and the range is between 1 and 31536000 seconds. Both watchdog-resolution and watchdog-max-timeout MD properties settings are supported. Signed-off-by: NWim Coekaerts <wim.coekaerts@oracle.com> Reviewed-by: NJulian Calaby <julian.calaby@gmail.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2016 1 次提交
-
-
由 Toshi Kani 提交于
Set IORESOURCE_SYSTEM_RAM in flags of resource ranges with "System RAM", "Kernel code", "Kernel data", and "Kernel bss". Note that: - IORESOURCE_SYSRAM (i.e. modifier bit) is set in flags when IORESOURCE_MEM is already set. IORESOURCE_SYSTEM_RAM is defined as (IORESOURCE_MEM|IORESOURCE_SYSRAM). - Some archs do not set 'flags' for children nodes, such as "Kernel code". This patch does not change 'flags' in this case. Signed-off-by: NToshi Kani <toshi.kani@hpe.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-arch@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-mm <linux-mm@kvack.org> Cc: linux-parisc@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1453841853-11383-7-git-send-email-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 22 1月, 2016 2 次提交
-
-
由 Mike Frysinger 提交于
A system call trace trigger on entry allows the tracing process to inspect and potentially change the traced process's registers. Account for that by reloading the %g1 (syscall number) and %i0-%i5 (syscall argument) values. We need to be careful to revalidate the range of %g1, and reload the system call table entry it corresponds to into %l7. Reported-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Tested-by: NMike Frysinger <vapier@gentoo.org>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2016 2 次提交
-
-
由 Christoph Hellwig 提交于
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Sparc already uses the same code as the generic code for the PCI implementation but just fails the call sbus. This moves to the generic implemenation which eventually return -EIO due to the NULL dma_mask pointer in the device. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 1月, 2016 1 次提交
-
-
由 Will Deacon 提交于
As illustrated by commit a3afe70b ("[S390] latencytop s390 support."), HAVE_LATENCYTOP_SUPPORT is defined by an architecture to advertise an implementation of save_stack_trace_tsk. However, as of 9212ddb5 ("stacktrace: provide save_stack_trace_tsk() weak alias") a dummy implementation is provided if STACKTRACE=y. Given that LATENCYTOP already depends on STACKTRACE_SUPPORT and selects STACKTRACE, we can remove HAVE_LATENCYTOP_SUPPORT altogether. Signed-off-by: NWill Deacon <will.deacon@arm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: James Hogan <james.hogan@imgtec.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Helge Deller <deller@gmx.de> Acked-by: NMichael Ellerman <mpe@ellerman.id.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 1月, 2016 3 次提交
-
-
由 Minchan Kim 提交于
MADV_FREE needs pmd_dirty and pmd_mkclean for detecting recent overwrite of the contents since MADV_FREE syscall is called for THP page. This patch adds pmd_dirty and pmd_mkclean for THP page MADV_FREE support. Signed-off-by: NMinchan Kim <minchan@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Shaohua Li <shli@kernel.org> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Hugh Dickins <hughd@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rik van Riel <riel@redhat.com> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Shaohua Li <shli@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
With new refcounting we don't need to mark PMDs splitting. Let's drop code to handle this. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
Tail page refcounting is utterly complicated and painful to support. It uses ->_mapcount on tail pages to store how many times this page is pinned. get_page() bumps ->_mapcount on tail page in addition to ->_count on head. This information is required by split_huge_page() to be able to distribute pins from head of compound page to tails during the split. We will need ->_mapcount to account PTE mappings of subpages of the compound page. We eliminate need in current meaning of ->_mapcount in tail pages by forbidding split entirely if the page is pinned. The only user of tail page refcounting is THP which is marked BROKEN for now. Let's drop all this mess. It makes get_page() and put_page() much simpler. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: NSasha Levin <sasha.levin@oracle.com> Tested-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NJerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 1月, 2016 1 次提交
-
-
由 Nitin Gupta 提交于
Orabug: 22495713 Currently, NUMA node distance matrix is initialized only when a machine descriptor (MD) exists. However, sun4u machines (e.g. Sun Blade 2500) do not have an MD and thus distance values were left uninitialized. The initialization is now moved such that it happens on both sun4u and sun4v. Signed-off-by: NNitin Gupta <nitin.m.gupta@oracle.com> Tested-by: NMikael Pettersson <mikpelinux@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-