Merge tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Fourth batch of DT changes for 4.2:
- rtc node for at91sam9rl/at91sam9rlek
- move to stdout-path for console on kizbox and all Atmel's boards
- Addition of the Acme Systems' Arietta G25
- two little fixes for Kizbox and sama5d4ek

* tag 'at91-dt4' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: sama5d4ek: mci0 uses slot 0
  ARM: at91/dt: kizbox: fix mismatch LED PWM device
  ARM: at91/dt: Add Acme Arietta G25
  ARM: at91/dt: sama5d4 xplained: use stdout-path
  ARM: at91/dt: sama5d4ek: use stdout-path
  ARM: at91/dt: sama5d3 xplained: use stdout-path
  ARM: at91/dt: sama5d3xek: use stdout-path
  ARM: at91/dt: at91sam9x5ek: use stdout-path
  ARM: at91/dt: at91sam9rlek: use stdout-path
  ARM: at91/dt: at91sam9n12ek: use stdout-path
  ARM: at91/dt: at91sam9m10g45ek use stdout-path
  ARM: at91/dt: at91sam9g20ek: use stdout-path
  ARM: at91/dt: at91sam9263ek: use stdout-path
  ARM: at91/dt: at91sam9261ek: use stdout-path
  ARM: at91/dt: at91rm9200ek: use stdout-path
  ARM: at91/dt: kizbox: use stdout-path
  ARM: at91/dt: at91sam9rlek: add RTC
  ARM: at91/dt: at91sam9rl: fix rtc node

The i.MX device tree changes for 4.2:
 - Add device tree for i.MX7D SoC and imx7d-sdb board
 - New i.MX6 board support: Armadeus Systems APF6, Gateworks GW5510,
   and aristainetos2 boards
 - Change LVDS to use simple-panel for nitrogen6x and sabrelite boards
 - Add Wifi/Bluetooth devices support for cubox-i board
 - Remove unused regulators and correct OTG roles setting for
   imx6sl-warp board
 - Add I2C support for imx23-olinuxino board
 - Move imx6qdl HDMI device to a better place
 - Add power-domain for imx6qdl CODA device

* tag 'imx-dt-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (24 commits)
  ARM: dts: imx6dl: add imx6dl gpt specific compatible string
  ARM: dts: imx6: add DT for aristainetos2 board
  ARM: dts: cubox-i/hummingboard: Fix the license text
  ARM: dts: sabrelite: use simple-panel instead of display-timings for LVDS0
  ARM: dts: nitrogen6x: use simple-panel instead of display-timings for LVDS0
  ARM: dts: add imx7d-sdb support
  ARM: dts: add imx7d soc dtsi file
  ARM: dts: Armadeus Systems APF6 family support (i.MX6)
  ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode.
  ARM: dts: cubox-i: add support for Broadcom Wifi/Bluetooth devices
  Document: dt: binding: imx: update document for imx7d support
  ARM: dts: imx6qdl: Add power-domain phandle to CODA device node
  ARM: dts: Gateworks GW5510 support (i.MX6)
  ARM: dts: imx6sl-warp: Fix OTG roles
  ARM: dts: imx6sl-warp: Remove USB regulators
  ARM: dts: imx6sl-warp: Remove unused regulator
  ARM: dts: add pinfunc include file to support imx7d
  ARM: mxs: fix in tree users of ssd1306
  ARM: dts: imx6qdl-hummingboard: Add PCIe support
  ARM: dts: imx23-olinuxino: Add i2c support
  ...

Merge tag 'keystone-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Keystone DTS update for 4.2
	- Includes NETCP related EVM updates

* tag 'keystone-dts-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: k2l: fix the netcp range size
  ARM: dts: k2e: fix the netcp range size
  ARM: dts: k2hk: fix the netcp range size
  ARM: dts: k2l-evm: Add device bindings for netcp driver
  ARM: dts: k2e-evm: Add device bindings for netcp driver
  ARM: dts: k2hk-evm: Add device bindings for netcp driver

This pull request contains Broadcom BCM5301x related changes:

- Hauke adds the interrupt mapping for the BCM5301x PCIe controller

- Haule adds support for NAND flash using the standard Broadcom NAND controller
  iProc specific binding on BCM4708/5301x

- Rafal adds support for the Asus RT-AC87U router

* tag 'arm-soc/for-4.2/dts-part3' of https://github.com/Broadcom/stblinux:
  ARM: BCM5301X: Add DT for Asus RT-AC87U
  ARM: BCM5301X: add IRQ numbers for PCIe controller
  ARM: BCM5301X: add NAND flash chip description

The STMicrolectornics's STM32F429 MCU has the following main features:
 - Cortex-M4 core running up to @180MHz
 - 2MB internal flash, 256KBytes internal RAM
 - FMC controller to connect SDRAM, NOR and NAND memories
 - SD/MMC/SDIO support
 - Ethernet controller
 - USB OTFG FS & HS controllers
 - I2C, SPI, CAN busses support
 - Several 16 & 32 bits general purpose timers
 - Serial Audio interface
 - LCD controller
Tested-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMaxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

Merge tag 'sunxi-dt-for-4.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Allwinner DT changes for 4.2, take 2

A bunch of new DT changes for the 4.2 merge window, among which:
  - Enable the SRAM controller on the A10/A10s/A13/A20
  - A33 support
  - New boards: A23 EVB, SinA33, GA10H-A33, Mele A1000G

* tag 'sunxi-dt-for-4.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box
  ARM: dts: sun8i: Add dts file for the GA10H-A33 tablet
  ARM: dts: sun8i-a33: Add dts for Sinlinx SinA33 development board.
  ARM: dts: sun8i-a33: Add pinmux setting for uart0 on PB pins
  ARM: dts: sun8i: Add pinmux setting for 8bit mmc2
  ARM: dts: sun8i: Add usb_clk node for a23/a33
  ARM: dts: sun8i: Add ET-Q8 A33 support
  ARM: dts: sun8i: Add sun8i-a33 dtsi
  ARM: dts: sun8i: Add sun8i-a23-a33 dtsi
  ARM: dts: sun7i: Add A20 SRAM and SRAM controller
  ARM: dts: sun5i: Add A10s and A13 SRAM and SRAM controller
  ARM: dts: sun4i: Add A10 SRAM and SRAM controller
  ARM: dts: sunxi: Revert SRAM controller drivers patches
  ARM: dts: sun9i: Add device node for watchdog
  ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2
  ARM: dts: sun7i: Add uart4_pins_b definition
  ARM: sun8i: Introduce A23 Evaluation Board Support

Update the arria10 gmac nodes with all the necessary properties for ethernet
to function on the Arria10 devkit.
Signed-off-by: NDinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: NKevin Hilman <khilman@linaro.org>

k2l netcp range size is 16M (0x1000000) and not 0xffffff. This patch fixes
this. Similarly fix the size of switch module register space to 0x20000.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

k2e netcp range size is 16M (0x1000000) and not 0xffffff. This patch fixes
this. Similarly fix the size of switch module register space to 0x20000.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

k2hk netcp range size is 1M (0x100000) and not 0xfffff. This patch fixes
this.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

This patch enables networking on k2l evm by providing
device bindings for netcp, knav, and qmss. See device
binding documentation at

Documentation/devicetree/bindings/net/keystone-netcp.txt
Signed-off-by: NWingMan Kwok <w-kwok2@ti.com>
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

This patch enables networking on k2e evm by adding device
bindings for netcp, knav and qmss. See device binding
documentation below for details.

Documentation/devicetree/bindings/net/keystone-netcp.txt
Signed-off-by: NWingMan Kwok <w-kwok2@ti.com>
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

This patch enables networking on k2hk evm by adding device
bindings for netcp, knav and qmss.  See device binding
documentation below for details.

Documentation/devicetree/bindings/net/keystone-netcp.txt
Signed-off-by: NWingMan Kwok <w-kwok2@ti.com>
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSantosh Shilimkar <ssantosh@kernel.org>

Merge tag 'socfpga_dts_for_v4.2_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA updates for v4.2 part 3
- Add SCU node for Arria 10
- Add enable-method for cpu nodes
- Add SDRAM controller binding doc
- Enable gpio-leds on SoCFPGA Socrates board

* tag 'socfpga_dts_for_v4.2_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: socrates: add gpio-leds
  ARM: socfpga: socrates: enable gpio0/1
  ARM: socfpga: dts: add sdram controller dt binding doc
  ARM: socfpga: dts: add enable-method property for cpu nodes
  ARM: socfpga: dts: add the a9-scu node for arria10

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

The driver for the PCIe controller was just added, this adds the
missing definition of the IRQ numbers to device tree. The driver itself
will be automatically detected by bcma.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

This adds the NAND flash chip description for a standard chip found
connected to this SoC. This makes use of generic Broadcom NAND driver
with the iProc interface.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>

Mci0 uses slot 0 not 1.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Fixes: 7a475267 ("ARM: at91: dt: add device tree file for SAMA5D4ek board")
Cc: stable@vger.kernel.org
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The network_red LED uses the 4th PWM device.
Signed-off-by: NGaël PORTAY <g.portay@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add a minimum Device Tree for Acme Arietta G25.
http://acme.systems/ariettaSigned-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NSergio Tanzilli <tanzilli@acmesystems.it>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the bootargs.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console and remove the console argument from
the kernel command line.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Use stdout-path to specify the console.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The kizbox dts are using the deprecated linux,stdout-path. Replace those by
stdout-path.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NGaël PORTAY <g.portay@overkiz.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Add RTC support to the at91sam9rlek.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The RTC lives at 0xfffffe00. Also reorder the node properly.
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

The i.MX6DL/S GPT has a different programming model from i.MX6Q one.
Add the compatible string "fsl,imx6dl-gpt" for it, and leave
"fsl,imx6q-gpt" there to keep the existing/old kernel happy.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

This patch adds support for the imx6dl based aristainetos2 board
with following configuration:

CPU:   Freescale i.MX6DL rev1.1 at 792 MHz
MReset cause: POR
MBoard: aristaitenos2
DRAM:  1 GiB
NAND:  1024 MiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
SF: Detected N25Q128A with page size 256 Bytes, erase size 64 KiB, total 16 MiB
Display: lb07wv8 (800x480)

As this board can be used with 2 different display types, the
differences between them are extracted into 2 DTS files, and
the common settings are collected in a common file.
Signed-off-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Arrange the license text a bit to make it clear.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Also add label for backlight_lvds and connect it to the LVDS display.
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Also add label for backlight_lvds and connect it to the display.
Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>