Currently we sometimes used block_write_full_page() and sometimes
ext4_bio_write_page() for writeback (depending on mount options and call
path). Let's always use ext4_bio_write_page() to simplify things a bit.
Reviewed-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

This patch add supports for indirect file support punching hole.  It
is almost the same as ext4_ext_punch_hole.  First, we invalidate all
pages between this hole, and then we try to deallocate all blocks of
this hole.

A recursive function is used to handle deallocation of blocks.  In
this function, it iterates over the entries in inode's i_blocks or
indirect blocks, and try to free the block for each one of them.

After applying this patch, xfstest #255 will not pass w/o extent because
indirect-based file doesn't support unwritten extents.
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

When usrjquota or grpjquota mount options are specified several times,
we leak memory storing the names. Free the memory correctly.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NJan Kara <jack@suse.cz>

Otherwise, ext4 file systems with the quota featured enable will get a
very confusing "No such process" error message if the quota code is
built as a module and the quota_v2 module has not been loaded.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
Acked-by: NJan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org

In addition, print the error returned from ext4_enable_quotas()
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
Cc: stable@vger.kernel.org

This patch adds a tracepoint in ext4_punch_hole.

CC: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

After we have finished extending the file system, we need to trigger a
the lazy inode table thread to zero out the inode tables.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

Validate the bh pointer before using it, since
ext4_read_block_bitmap_nowait() might return NULL.

I've seen this in fsfuzz testing.

 EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616
 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0
 ...
 Call Trace:
  [<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60
  [<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80
  [<ffffffff811d0d36>] ? __getblk+0x36/0x70
  [<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210
  [<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140
  [<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0
  [<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100
  [<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0
  [<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230
  [<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490
  [<ffffffff811b8cd7>] evict+0xa7/0x1c0
  [<ffffffff811b8ed3>] iput_final+0xe3/0x170
  [<ffffffff811b8f9e>] iput+0x3e/0x50
  [<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90
  [<ffffffff81231d0b>] ext4_create+0xeb/0x170
  [<ffffffff811aae9c>] vfs_create+0xac/0xd0
  [<ffffffff811ac845>] lookup_open+0x185/0x1c0
  [<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170
  [<ffffffff811acb54>] do_last+0x2d4/0x7a0
  [<ffffffff811af743>] path_openat+0xb3/0x480
  [<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0
  [<ffffffff811afc49>] do_filp_open+0x49/0xa0
  [<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150
  [<ffffffff8119da28>] do_sys_open+0x108/0x1f0
  [<ffffffff8119db51>] sys_open+0x21/0x30
  [<ffffffff81618959>] system_call_fastpath+0x16/0x1b

Also fix comment for ext4_read_block_bitmap_nowait()
Signed-off-by: NEryu Guan <guaneryu@gmail.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Because the function 'sb_getblk' seldomly fails to return NULL
value,it will be better to use 'unlikely' to optimize it.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

The only reason for sb_getblk() failing is if it can't allocate the
buffer_head.  So ENOMEM is more appropriate than EIO.  In addition,
make sure that the file system is marked as being inconsistent if
sb_getblk() fails.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Pull ARM fixes from Russell King.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel
  ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable
  ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b
  ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM
  ARM: 7611/1: VIC: fix bug in VIC irqdomain code
  ARM: 7610/1: versatile: bump IRQ numbers
  ARM: 7609/1: disable errata work-arounds which access secure registers
  ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier

Pull EDAC fixes from Borislav Petkov:
 "Two error path fixes causing a crash and a Kconfig fix for an issue
  which spilled all EDAC suboptions into the 'Device Drivers' menu."

* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Cleanup device deregistering path
  EDAC: Fix EDAC Kconfig menu
  EDAC: Fix kernel panic on module unloading

The check for a pmd being in the process of being split was dropped by
mistake by commit d10e63f2 ("mm: numa: Create basic numa page
hinting infrastructure"). Put it back.
Reported-by: NDave Jones <davej@redhat.com>
Debugged-by: NHillf Danton <dhillf@gmail.com>
Acked-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Kirill Shutemov <kirill@shutemov.name>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 3a50597d ("KEYS: Make the session and process keyrings
per-thread") removed the definition of the thread_group_cred structure,
but left a now unused pointer in struct cred.
Signed-off-by: NMarc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "People are back from the holiday breaks, and it shows.  Here are a
  bunch of fixes for a number of platforms:
   - A couple of small fixes for Nomadik
   - A larger set of changes for kirkwood/mvebu
     - uart driver selection, dt clocks, gpio-poweroff fixups, a few
       __init annotation fixes and some error handling improvement in
       their xor dma driver.
   - i.MX had a couple of minor fixes (and a critical one for flexcan2
     clock setup)
   - MXS has a small board fix and a framebuffer bugfix
   - A set of fixes for Samsung Exynos, fixing default bootargs and some
     Exynos5440 clock issues
   - A set of OMAP changes including PM fixes and a few sparse warning
     fixups

  All in all a bit more positive code delta than we'd ideally want to
  see here, mostly from the OMAP PM changes, but nothing overly crazy."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  ...

Pull drm update from Dave Airlie:
 "Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in.

  It's a bit big but its mostly exynos license fix ups and I'd rather
  not hold those up since its legally stuff.

  Radeon has a couple of fixes from dma engine work, TTM is just a
  locking fix, and dma-buf fix has been hanging around and I finally got
  a chance to review it."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/ttm: fix fence locking in ttm_buffer_object_transfer
  drm/prime: drop reference on imported dma-buf come from gem
  drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
  drm/exynos: move finish page flip to a common place
  drm/exynos: fimd: modify condition in fimd resume
  drm/radeon: fix DMA CS parser for r6xx linear copy packet
  drm/radeon: split r6xx and r7xx copy_dma functions
  drm/exynos: Use devm_clk_get in exynos_drm_gsc.c
  drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c
  drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c
  drm/exynos: Use devm_clk_get in exynos_drm_rotator.c
  drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c
  drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c
  drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
  drm/exynos: Remove redundant NULL check
  drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c
  drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c
  drm/exynos: fix gem buffer allocation type checking
  drm/exynos: remove needless parenthesis.
  drm/exynos: fix incorrect interrupt induced by m2m operation.
  ...

Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
The biggest change is a fix to deal with different power state
on omap2 registers that causes issues trying to use common PM code.
Also fix few incorrect registers, and an issue for omap1 USB, and
few sparse fixes for issues that sneaked in with all the clean-up.

* tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  ARM: OMAP1: fix USB configuration use-after-release
  ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values
  ARM: OMAP3: clock data: Add missing enable/disable for EMU clock
  ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
  ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets
  ARM: OMAP4: PRM: Correct reset source map
  ARM: OMAP: SRAM: resolve sparse warnings
  ARM: OMAP AM33xx: hwmod data: resolve sparse warnings
  ARM: OMAP: 32k counter: resolve sparse warnings
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge branch 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

From Kukjin Kim:
Most of them are EXYNOS5440 fixes which are for changing uart console,
cpu id (typo)  and silent complaining gpio error in kernel boot.

* 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: skip the clock initialization for exynos5440
  ARM: EXYNOS: enable PINCTRL for EXYNOS5440
  ARM: dts: use uart port1 for console on exynos4210-smdkv310
  ARM: dts: use uart port0 for console on exynos5440-ssdk5440
  ARM: SAMSUNG: fix the cpu id for EXYNOS5440
  ARM: EXYNOS: Revise HDMI resource size

From Shawn Guo:
I have to send one critical mxsfb fix through arm-soc, as FB maintainer
is unresponsive for quite a while.  People start complaining the missing
of such an important fix.

* tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  video: mxsfb: fix crash when unblanking the display
  ARM: dts: imx23-olinuxino: Fix IOMUX settings

From Shawn Guo:

It includes one critical fix - wrong flexcan2 clock will hang system
when the port gets brought up.  The other two are non-critical fixes,
which are sent together here, since it's still early -rc stage.

* tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: dts: imx31-bug: Fix manufacturer compatible string
  clk: imx: Remove 'clock-output-names' from the examples

Pull sound fixes from Takashi Iwai:
 "Nothing too exciting here, just a few regression and trivial fixes,
  and new quirks for HD-audio and USB-audio.

   - HD-audio mute LED mode enum fix
   - Fix kernel panic of Digidesign Mbox2 usb-audio quirk (which was new
     in 3.8-rc1)
   - Creative BT-D1 usb-audio quirk
   - mute LED fixup for HP Pavillion 17 laptop"

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec)
  ALSA: au88x0: fix incorrect left shift
  sound: oss/pas2: Fix possible access out of array
  ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk
  ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks
  ALSA: hda - Switch "On" and "Off" for "Mute-LED Mode" kcontrol

Pull networking fixes from David Miller:

 1) New sysctl ndisc_notify needs some documentation, from Hanns
    Frederic Sowa.

 2) Netfilter REJECT target doesn't set transport header of SKB
    correctly, from Mukund Jampala.

 3) Forcedeth driver needs to check for DMA mapping failures, from Larry
    Finger.

 4) brcmsmac driver can't use usleep_range while holding locks, use
    udelay instead.  From Niels Ole Salscheider.

 5) Fix unregister of netlink bridge multicast database handlers, from
    Vlad Yasevich and Rami Rosen.

 6) Fix checksum calculations in netfilter's ipv6 network prefix
    translation module.

 7) Fix high order page allocation failures in netfilter xt_recent, from
    Eric Dumazet.

 8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because
    mac802154_process_data() can execute in process rather than
    interrupt context.  From Alexander Aring.

 9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one
    tcp_push() too many.  From Eric Dumazet and Willy Tarreau.

10) Fix skb->truesize tracking in XEN netfront driver, from Ian
    Campbell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  xen/netfront: improve truesize tracking
  ipv4: fix NULL checking in devinet_ioctl()
  tcp: fix MSG_SENDPAGE_NOTLAST logic
  net/ipv4/ipconfig: really display the BOOTP/DHCP server's address.
  ip-sysctl: fix spelling errors
  mac802154: fix NOHZ local_softirq_pending 08 warning
  ipv6: document ndisc_notify in networking/ip-sysctl.txt
  ath9k: Fix Kconfig for ATH9K_HTC
  netfilter: xt_recent: avoid high order page allocations
  netfilter: fix missing dependencies for the NOTRACK target
  netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation
  bridge: add empty br_mdb_init() and br_mdb_uninit() definitions.
  vxlan: allow live mac address change
  bridge: Correctly unregister MDB rtnetlink handlers
  brcmfmac: fix parsing rsn ie for ap mode.
  brcmsmac: add copyright information for Canonical
  rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call
  rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call
  rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call
  rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call
  ...

Noticed while reviewing the fence locking in the radeon pageflip
handler.

v2: Instead of grabbing the bdev->fence_lock in object_transfer just
move the single callsite of that function a few lines, so that it is
protected by the fence_lock. Suggested by Jerome Glisse.

v3: Fix typo in commit message.
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

From Jason Cooper:

fixes for mvebu/kirkwood v3.8
 - use correct uart driver for mvebu boards
 - add a missing DT clocks
 - gpio-poweroff level vs. edge triggering, use gpio_is_valid()
 - remove an inappropriate __init, modules need to access function.
 - various DT fixes
 - error handling in mv_xor

* tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux:
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  Power: gpio-poweroff: Fix documentation and gpio_is_valid
  ARM: Kirkwood: Fix missing clk for USB device.
  arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
Signed-off-by: NOlof Johansson <olof@lixom.net>

I mismerged a previous branch from Alexander, and accidentally left
in ARCH_USES_GETTIMEOFFSET. Remove it.
Signed-off-by: NOlof Johansson <olof@lixom.net>
Cc: Alexander Shiyan <shc_work@mail.ru>

Merge tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes

From Linus Walleij:
Two fixes to the Nomadik:
- Delete a dangling include
- Bump IRQ numbers to offset at 32

* tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: bump the IRQ numbers again
  ARM: nomadik: delete dangling include

This fixes suspend to RAM adding necessary save and restore of L2 and GIC.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

When we fail to power down, we need to clear out the power request.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

With commit 384a2902 (ARM: gic: use a private mapping for CPU target
interfaces), wake-up IPIs now go to all cores as the gic cpu interface
numbering may not follow core numbering. This broke secondary boot on
highbank since the boot address was already set for all secondary cores,
this caused all cores to boot before the kernel was ready.

Fix this by moving the setting of the jump address to
highbank_boot_secondary instead of highbank_smp_prepare_cpus and
highbank_cpu_die. Also, clear the address when we boot. This prevents
cores from booting before they are actually triggered and is also necessary
to get suspend/resume to work.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

s/hignbank/highbank/
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

With the addition of commit a0ae0240 (ARM: kernel: add device tree init
map function), the cpu reg values must match the cpu mpidr register or we'll
get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg
value needs to be 0x90n to quiet the warnings.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

While device_type is considered deprecated, it is still needed for tools
like lshw to identify cpu nodes.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Alex writes:
 A few more fixes for DMA and a mac quirk.

* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
  drm/radeon: fix DMA CS parser for r6xx linear copy packet
  drm/radeon: split r6xx and r7xx copy_dma functions

Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem
makes memory leak. release function of dma-buf cannot be called because f_count
of dma-buf increased by importing gem and gem ref count cannot be decrease
because of exported dma-buf.

So I add dma_buf_put() for imported gem come from its own gem into each drivers
having prime_import and prime_export capabilities. With this, only gem ref
count is increased if importing gem exported from gem of same driver.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NKyungmin.park <kyungmin.park@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Using RX_COPY_THRESHOLD is incorrect if the SKB is actually smaller
than that. We have already accounted for this in
NETFRONT_SKB_CB(skb)->pull_to so use that instead.

Fixes WARN_ON from skb_try_coalesce.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: annie li <annie.li@oracle.com>
Cc: xen-devel@lists.xen.org
Cc: netdev@vger.kernel.org
Cc: stable@kernel.org # 3.7.x only
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
- change exynos file license
  . Most of exynos files had been copied from some randome
    file and not updated correctly(wrong company name used).
    This was our mistakes so chagnes it correctly. For this,
    I'm not sure that this patch should go to -fix or -next.
    So please give me any comment if there is any problem.
- consider buffer allocation without iommu
  . Without iommu, dma_alloc_attrs function allocates some
    memory region and returns cpu address so this patch makes
    the cpu address to be set to buf->kvaddr correctly
- cleanups to ipp relevant codes.
- use common finish page flip function
  . to avoid the duplication of same code, use
    exynos_drm_crtc_finish_pageflip function commonly instead
    of each one.
- fix fimd resume issue.
  . when fimd was turned off by suspend, there was one issue that
    the fimd wasn't turned on by resume so fix it chaing resume
    condition.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (25 commits)
  drm/exynos: move finish page flip to a common place
  drm/exynos: fimd: modify condition in fimd resume
  drm/exynos: Use devm_clk_get in exynos_drm_gsc.c
  drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c
  drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c
  drm/exynos: Use devm_clk_get in exynos_drm_rotator.c
  drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c
  drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c
  drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
  drm/exynos: Remove redundant NULL check
  drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c
  drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c
  drm/exynos: fix gem buffer allocation type checking
  drm/exynos: remove needless parenthesis.
  drm/exynos: fix incorrect interrupt induced by m2m operation.
  drm/exynos: remove color bar pattern operation.
  drm/exynos: correct some comments to abbreviation.
  drm/exynos: fix build warning.
  drm/exynos: consider both case of vflip and hflip.
  drm/exynos: remove needless error handling to property.
  ...

Pablo Neira Ayuso says:

====================
The following batch contains Netfilter fixes for 3.8-rc2, they are:

* Fix IPv6 stateless network/port translation (NPT) checksum
  calculation, from Ulrich Weber.

* Fix for xt_recent to avoid memory allocation failures if large
  hashtables are used, from Eric Dumazet.

* Fix missing dependencies in Kconfig for the deprecated NOTRACK,
  from myself.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The second FlexCAN port uses different clock than the first one, configure
correct clock to prevent hanging of the system during bringing up of the port.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

Pull ACPI and power management fixes from Rafael Wysocki:

 - Removal of some ACPICA code that the kernel will never use from Lv
   Zheng.

 - APEI fix from Adrian Huang.

 - Removal of unnecessary ACPI memory hotplug driver code from Liu
   Jinsong.

 - Minor ACPI power management fixes.

 - ACPI debug code fix from Joe Perches.

 - ACPI fix to make system bus device nodes get the right names.

 - PNP resources handling fixes from Witold Szczeponik.

 - cpuidle fix for a recent regression stalling boot on systems with
   great numbers of CPUs from Daniel Lezcano.

 - cpuidle fixes from Sivaram Nair.

 - intel_idle debug message fix from Youquan Song.

 - cpufreq build regression fix from Larry Finger.

 - cpufreq fix for an obscure initialization race related to statistics
   from Konstantin Khlebnikov.

 - cpufreq change disabling the Longhaul driver by default from Rafał
   Bilski.

 - PM core fix preventing device suspend errors from happening during
   system suspend due to obscure race conditions.

 - PM QoS local variable name cleanup.

* tag 'pm+acpi-for-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: Move disabling/enabling runtime PM to late suspend/early resume
  PM / QoS: Rename local variable in dev_pm_qos_add_ancestor_request()
  ACPI / scan: Do not use dummy HID for system bus ACPI nodes
  cpufreq / governor: Fix problem with cpufreq_ondemand or cpufreq_conservative
  cpufreq / Longhaul: Disable driver by default
  cpufreq / stats: fix race between stats allocation and first usage
  cpuidle: fix lock contention in the idle path
  intel_idle: pr_debug information need separated
  cpuidle / coupled: fix ready counter decrement
  cpuidle: Fix finding state with min power_usage
  PNP: Handle IORESOURCE_BITS in resource allocation
  PNP: Simplify setting of resources
  ACPI / power: Remove useless message from device registering routine
  ACPI / glue: Update DBG macro to include KERN_DEBUG
  ACPI / PM: Do not apply ACPI_SUCCESS() to acpi_bus_get_device() result
  ACPI / memhotplug: remove redundant logic of acpi memory hotadd
  ACPI / APEI: Fix the returned value in erst_dbg_read
  ACPICA: Remove useless mini-C library.