- 03 1月, 2006 2 次提交
-
-
由 Matt Mackall 提交于
As everyone knows, the rule is: "i before e.. um.. always." Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 02 1月, 2006 2 次提交
-
-
由 Petr Baudis 提交于
Remove support for lxdialog --checklist The checklist lxdialog functionality is not used by menuconfig (only the radiolist variant is used) and supporting it would significantly complicate the forthcoming liblxdialog API. Signed-off-by: NPetr Baudis <pasky@suse.cz> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Brian Gerst 提交于
Ignore all files generated from *_shipped files, plus a few others. Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 27 12月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
If the file .kconfig.d is missing then make sure to run 'make silentoldconfig', since we have no way to detect if a Kconfig file has been updated. -kconfig.d is created by kconfig and is removed as part of 'make clean' so the situation is likely to occur in reality. Jan Beulich <JBeulich@novell.com> reported this bug. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 17 12月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
The only lxdialog user i kconfig - for menuconfig. So move it to reflect this. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 23 11月, 2005 1 次提交
-
-
由 Roman Zippel 提交于
This makes pkg-config now the prefered way to configure QT and properly fixes the recent Fedora breakage and leaves the old QT detection as fallback mechanism. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 9 次提交
-
-
由 Roman Zippel 提交于
Add some more checks during the parsing of .config, so that after parsing sym_change_count reflects the correct state whether the .config is correct and in sync with the Kconfig or if it needs saving. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Add a few error tokens to the parser to catch common errors and print more descriptive error messages. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
This simplifies the parser a bit by merging the various symbol types into a single token and adds the type to the keyword hash. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Use gperf to generate a hash for the kconfig keywords. This greatly reduces the size of the generated scanner and makes it easier to extend kconfig. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Remove the long obsolete zconf.tab.h and fix kconfig make rules to generate the correct output files. Setting LKC_GENPARSER will now also update the shipped files. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
This allows variable arguments in the range option for int and hex config symbols. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
Allow to force setting of config variables during all{no,mod,yes,random}config to a specific value. For that conf first checks the KCONFIG_ALLCONFIG environment variable for a file name, otherwise it checks for all{no,mod,yes,random}.config and all.config. The file is a normal config file, which presets the config variables, but they are still subject to normal dependency checks. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roman Zippel 提交于
The restart check whether new symbols became visible, didn't always work for choice symbols. Even if a choice symbol itself isn't changable, the childs are. This also requires to update the new status of all choice values, once one of them is set. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
When doing its recursive dependency check, scripts/kconfig/conf uses the flag SYMBOL_CHECK_DONE to avoid rechecking a symbol it has already checked. However, that flag is only set at the top level, so if a symbol is first encountered as a dependency of another symbol it will be rechecked every time it is encountered until it's encountered at the top level. This patch adjusts the flag setting so that each symbol will only be checked once, regardless of whether it is first encountered at the top level, or while recursing down from another symbol. On complex configurations, this vastly speeds up scripts/kconfig/conf. The config in the powerpc merge tree is particularly bad: this patch reduces the time for 'scripts/kconfig/conf -o arch/powerpc/Kconfig' by a factor of 40 on a G5. That's even including the time to print the config, so the speedup in the actual checking is more likely 2 or 3 orders of magnitude. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 11月, 2005 1 次提交
-
-
由 Yuri Vasilevski 提交于
A typo fix for fix-build-on-nls-free-systems.patch that caused all systems to be detected as not having NLS. Signed-off-by: NYuri Vasilevski <yvasilev@duke.math.cinvestav.mx> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 11月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
From: Than Ngo <than@redhat.com> qt as installed on fedora core (2 and 3) does not work with vanilla kernel. The linker fails to locate the qt lib: Actual Results: # make xconfig HOSTLD scripts/kconfig/qconf /usr/bin/ld: cannot find -lqt collect2: ld returned 1 exit status Than Ngo has provided following fix for the bug. Cc: Than Ngo <than@redhat.com> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 31 10月, 2005 2 次提交
-
-
由 Yuri Vasilevski 提交于
I made a patch that detects if libintl.h (needed for nls) is present on the host system and if it's not, it nls support is disabled by providing dummies for the used nls functions. This way if there is nls support on the host system the *config targets will build according to Arnaldo Carvalho de Melo's i18n modifications, else it just uses the original English messages. I have also made a bug report at kernel's bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=5501 And there is a discussion about this problem in Gentoo's bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=99810 Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Add explicit text about - where menuconfig '/' (search) searches for strings, - that substrings are allowed, and - that regular expressions are supported. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 10月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
This still leaves driver and architecture-specific subdirectories alone, but gets rid of the bulk of the "generic" generated files that we should ignore. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 3 次提交
-
-
由 Egry Gabor 提交于
The 'make update-po-config' creates the .pot file for the default arch. This patch enhances it with all arch. Signed-off-by: NEgry Gabor <gaboregry@t-online.hu> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Egry Gabor 提交于
The end of line character doesn't exist on end of help in all case, check it first. Signed-off-by: NEgry Gabor <gaboregry@t-online.hu> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Egry Gabor 提交于
The gettext doesn't handle the {CONFIG}:00000 markers as sources. I added a simple comment prefix for them. Signed-off-by: NEgry Gabor <gaboregry@t-online.hu> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 7月, 2005 2 次提交
-
-
由 Joachim Nilsson 提交于
I ran glade-2 on the glade file, fixed two missing stock icons and cleaned up the C code that inserts the single/split/full modes. The rest of the patch is minor cleanups only. I refrained from using all the included xpm icons in images.c (like qconf.cc does) in favour of using the stock Gtk+ icons instead. Oh, yes there was a "back" bug in split mode that I also removed, oh well... It has been tested with success by several people, including Jesper Juhl, Randy Dunlap and myself. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 blaisorblade@yahoo.it 提交于
Replace all menu_add_prop mimicking menu_add_prompt with the latter func. I've had to add a return value to menu_add_prompt for one usage. I've rebuilt scripts/kconfig/zconf.tab.c_shipped by hand to reflect changes in the source (I've not the same Bison version so regenerating it wouldn't have been not a good idea), and compared it with what Roman itself did some time ago, and it's the same. So I guess this can be finally merged. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 26 6月, 2005 2 次提交
-
-
由 J.A. Magallon 提交于
scripts/ is full of mismatches between char* params an signed char* arguments, and viceversa. gcc4 now complaints loud about this. Patch below deletes all those 'signed'. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jean-Christophe Dubois 提交于
This is failing on my cross-compilation environment (From a solaris system) using gcc-3.4.1 (as the compiler can't find a prototype for the setlocale() function). Signed-off-by: NJean-Christophe Dubois <jdubois@mc.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Thierry Vignaud 提交于
gconfig: only show scrollbars if needed (which is more user friendly): Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 5月, 2005 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
This patch adds i18n support for make *config, allowing users to have the config process in their own language. No printk was harmed in the process, don't worry, so all the bug reports, kernel messages, etc, remain in english, just the user tools to configure the kernel are internationalized. Users not interested in translations can just unset the related LANG, LC_ALL, etc env variables and have the config process in plain english, something like: LANG= make menuconfig is enough for having the whole config process in english. Or just don't install any translation file. Translations for brazilian portuguese are being done by a team of volunteers at: http://www.visionflex.inf.br/kernel_ptbr/pmwiki.php/Principal/Traducoes To start the translation process: make update-po-config This will generate the pot template named scripts/kconfig/linux.pot, copy it to, say, ~/es.po, to start the translation for spanish. To test your translation, as root issue this command: msgfmt -o /usr/share/locale/es/LC_MESSAGES/linux.mo ~/es.po Replace "es" with your language code. Then execute, for instance: make menuconfig The current patch doesn't use any optimization to reduce the size of the generated .mo file, it is possible to use the config option as a key, but this doesn't prevent the current patch from being used or the translations done under the current scheme to be in any way lost if we chose to do any kind of keying. Thanks to Fabricio Vaccari for starting the pt_BR (brazilian portuguese) translation effort, Thiago Maciera for helping me with the gconf.cc (QT frontent) i18n coding and to all the volunteers that are already working on the first translation, to pt_BR. I left the question on whether to ship the translations with the stock kernel sources to be discussed here, please share your suggestions. Signed-off-by: NArnaldo Carvalho de Melo <acme@conectiva.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-