Fix a potential out of range issue introduced by commit:
22fb72225a
f2fs: simplify write_orphan_inodes for better readable
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Let's remove the unnecessary return value.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Add a mount option: inline_data. If the mount option is set,
data of New created small files can be stored in their inode.
Signed-off-by: NHuajun Li <huajun.li@intel.com>
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NWeihong Xu <weihong.xu@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Add new inode flags F2FS_INLINE_DATA and FI_INLINE_DATA to indicate
whether the inode has inline data.

Inline data makes use of inode block's data indices region to save small
file. Currently there are 923 data indices in an inode block. Since
inline xattr has made use of the last 50 indices to save its data, there
are 873 indices left which can be used for inline data. When
FI_INLINE_DATA is set, the layout of inode block's indices region is
like below:

+-----------------+
|                 | Reserved. reserve_new_block() will make use of
| i_addr[0]       | i_addr[0] when we need to reserve a new data block
|                 | to convert inline data into regular one's.
|-----------------|
|                 | Used by inline data. A file whose size is less than
| i_addr[1~872]   | 3488 bytes(~3.4k) and doesn't reserve extra
|                 | blocks by fallocate() can be saved here.
|-----------------|
|                 |
| i_addr[873~922] | Reserved for inline xattr
|                 |
+-----------------+
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NHuajun Li <huajun.li@intel.com>
Signed-off-by: NWeihong Xu <weihong.xu@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Let's send REQ_META or REQ_PRIO when reading meta area such as NAT/SIT
etc.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch inserts information of bio types in more detail.
So, we can now see REQ_META and REQ_PRIO too.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Add the function f2fs_reserve_block() to easily reserve new blocks, and
use it to clean up more codes.
Signed-off-by: NHuajun Li <huajun.li@intel.com>
Signed-off-by: NHaicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: NWeihong Xu <weihong.xu@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If CONFIG_F2FS_CHECK_FS is unset, we don't need to add any debugging overhead.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously we read sit entries page one by one, this method lost the chance
of reading contiguous page together. So we read pages as contiguous as
possible for better mount performance.

change log:
 o merge judgements/use 'Continue' or 'Break' instead of 'Goto' as Gu Zheng
   suggested.
 o add mark_page_accessed() before release page to delay VM reclaiming.
 o remove '*order' for simplification of function as Jaegeuk Kim suggested.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: fix a bug on the block address calculation]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_submit_read_bio.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_bio]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for submit_read_page.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_page]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

It is not efficient comparing each segment type to find node or data.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: remove unnecessary white spaces]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Change log from v1:
  o add mark_page_accessed() not to reclaim the nat pages.

This patch changes the policy of submitting read bios at ra_nat_pages.

Previously, f2fs submits small read bios with block plugging.
But, with this patch, f2fs itself merges read bios first and then submits a
large bio, which can reduce the bio handling overheads.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

For better read performance, we add a new function to support for merging
contiguous read as the one for write.

v1-->v2:
 o add declarations here as Gu Zheng suggested.
 o use new structure f2fs_bio_info introduced by Jaegeuk Kim.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Acked-by: NGu Zheng <guz.fnst@cn.fujitsu.com>

Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Simplify write_orphan_inodes for better readable. Because we hold the
orphan_inode_mutex, so it's safe to use list_for_each_entry instead of
list_for_each_safe.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The f2fs has three bio types, NODE, DATA, and META, and manages some data
structures per each bio types.

The codes are a little bit messy, thus, this patch introduces a bio array
which groups individual data structures as follows.

struct f2fs_bio_info {
	struct bio *bio;		/* bios to merge */
	sector_t last_block_in_bio;	/* last block number */
	struct mutex io_mutex;		/* mutex for bio */
};

struct f2fs_sb_info {
	...
	struct f2fs_bio_info write_io[NR_PAGE_TYPE];	/* for write bios */
	...
};

The code changes from this new data structure are trivial.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The f2fs manages an extent cache to search a number of consecutive data blocks
very quickly.

However it conducts unnecessary cache operations if the file is highly
fragmented with no valid extent cache.

In such the case, we don't need to handle the extent cache, but just can disable
the cache facility.

Nevertheless, this patch gives one more chance to enable the extent cache.

For example,
1. create a file
2. write data sequentially which produces a large valid extent cache
3. update some data, resulting in a fragmented extent
4. if the fragmented extent is too small, then drop extent cache
5. close the file

6. open the file again
7. give another chance to make a new extent cache
8. write data sequentially again which creates another big extent cache.
...
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch removes an unnecessary semaphore (i.e., sbi->bio_sem).
There is no reason to use the semaphore when f2fs submits read and write IOs.
Instead, let's use a write mutex and cover the sbi->bio[] by the lock.

Change log from v1:
 o split write_mutex suggested by Chao Yu

Chao described,
"All DATA/NODE/META bio buffers in superblock is protected by
'sbi->write_mutex', but each bio buffer area is independent, So we
should split write_mutex to three for DATA/NODE/META."
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces PAGE_TYPE_OF_BIO() and cleans up do_submit_bio() with it.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We should use f2fs_put_page to release page for uniform style of f2fs code.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a tracepoint for f2fs_issue_discard.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Change log from v1:
 o fix 32bit drops reported by Dan Carpenter

This patch adds f2fs_issue_discard() to clean up blkdev_issue_discard() flows.

Dan carpenter reported:
"block_t is a 32 bit type and sector_t is a 64 bit type.  The upper 32
bits of the sector_t are not used because the shift will wrap."
Bug-Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If frequent small discards are issued to the device, the performance would
be degraded significantly.
So, this patch adds a sysfs entry to control the number of discards to be
issued during a checkpoint procedure.

By default, f2fs does not issue any small discards, which means max_discards
is zero.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds key functions to activate the small discard feature.

Note that this procedure is conducted during the checkpoint only.

In flush_sit_entries(), when a new dirty sit entry is flushed, f2fs calls
add_discard_addrs() which searches candidates to be discarded.
The candidates should be marked *invalidated* and also previous checkpoint
recognizes it as *valid*.

At the end of a checkpoint procedure, f2fs throws discards based on the
discard entry list.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds a slab cache entry for small discards.

Each entry consists of:

struct discard_entry {
	struct list_head list;	/* list head */
	block_t blkaddr;	/* block address to be discarded */
	int len;		/* # of consecutive blocks of the discard */
};
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

To find a zero bit using the result of OR operation between ckpt_valid_map
and cur_valid_map is more fast than find a zero bit in each bitmap.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: adjust changed function name]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When f2fs_set_bit is used, in a byte MSB and LSB is reversed,
in that case we can use __find_rev_next_bit or __find_rev_next_zero_bit.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: change the function names]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Pull ARM SoC fixes from Olof Johansson:
 "Much smaller batch of fixes this week.

  Biggest one is a revert of an OMAP display change that removed some
  non-DT pinmux code that was still needed for 3.13 to get DSI displays
  to work.

  There's also a fix that resolves some misdescribed GPIO controller
  resources on shmobile.  The rest are mostly smaller fixes, a couple of
  MAINTAINERS updates, etc"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Revert "ARM: OMAP2+: Remove legacy mux code for display.c"
  MAINTAINERS: Add keystone clock drivers
  MAINTAINERS: Add keystone git tree information
  ARM: s3c64xx: dt: Fix boot failure due to double clock initialization
  ARM: shmobile: r8a7790: Fix GPIO resources in DTS
  irqchip: renesas-intc-irqpin: Fix register bitfield shift calculation
  ARM: shmobile: lager: phy fixup needs CONFIG_PHYLIB

Pull firewire fixlet from Stefan Richter:
 "A one-liner to reenable WRITE SAME over SBP-2 like in v3.8...v3.12.
  Buggy targets which could malfunction when being subjected to this
  command are already sufficiently protected by a scsi_level check in sd
  + SCSI core"

* tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: sbp2: bring back WRITE SAME support

Pull SCSI target fixes from Nicholas Bellinger:
 "Mostly minor items this time around, the most notable being a FILEIO
  backend change to enforce hw_max_sectors based upon the current
  block_size to address a bug where large sized I/Os (> 1M) where being
  rejected"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
  target: Remove extra percpu_ref_init
  target/file: Update hw_max_sectors based on current block_size
  iser-target: Move INIT_WORK setup into isert_create_device_ib_res
  iscsi-target: Fix incorrect np->np_thread NULL assignment
  qla2xxx: Fix schedule_delayed_work() for target timeout calculations
  iser-target: fix error return code in isert_create_device_ib_res()
  iscsi-target: Fix-up all zero data-length CDBs with R/W_BIT set
  target: Remove write-only stats fields and lock from struct se_node_acl
  iscsi-target: return -EINVAL on oversized configfs parameter

Pull AIO leak fixes from Ben LaHaise:
 "I've put these two patches plus Linus's change through a round of
  tests, and it passes millions of iterations of the aio numa
  migratepage test, as well as a number of repetitions of a few simple
  read and write tests.

  The first patch fixes the memory leak Kent introduced, while the
  second patch makes aio_migratepage() much more paranoid and robust"

* git://git.kvack.org/~bcrl/aio-next:
  aio/migratepages: make aio migrate pages sane
  aio: fix kioctx leak introduced by "aio: Fix a trinity splat"

Since commit 36bc08cc ("fs/aio: Add support to aio ring pages
migration") the aio ring setup code has used a special per-ring backing
inode for the page allocations, rather than just using random anonymous
pages.

However, rather than remembering the pages as it allocated them, it
would allocate the pages, insert them into the file mapping (dirty, so
that they couldn't be free'd), and then forget about them.  And then to
look them up again, it would mmap the mapping, and then use
"get_user_pages()" to get back an array of the pages we just created.

Now, not only is that incredibly inefficient, it also leaked all the
pages if the mmap failed (which could happen due to excessive number of
mappings, for example).

So clean it all up, making it much more straightforward.  Also remove
some left-overs of the previous (broken) mm_populate() usage that was
removed in commit d6c355c7 ("aio: fix race in ring buffer page
lookup introduced by page migration support") but left the pointless and
now misleading MAP_POPULATE flag around.
Tested-and-acked-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The arbitrary restriction on page counts offered by the core
migrate_page_move_mapping() code results in rather suspicious looking
fiddling with page reference counts in the aio_migratepage() operation.
To fix this, make migrate_page_move_mapping() take an extra_count parameter
that allows aio to tell the code about its own reference count on the page
being migrated.

While cleaning up aio_migratepage(), make it validate that the old page
being passed in is actually what aio_migratepage() expects to prevent
misbehaviour in the case of races.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>

e34ecee2 reworked the percpu reference
counting to correct a bug trinity found.  Unfortunately, the change lead
to kioctxes being leaked because there was no final reference count to
put.  Add that reference count back in to fix things.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org

Commit 1bf49dd4 ("./Makefile: export initial ramdisk compression
config option") started setting the INITRD_COMPRESS environment variable
depending on which decompression models the kernel had available.

That is completely broken.

For example, we by default have CONFIG_RD_LZ4 enabled, and are able to
decompress such an initrd, but the user tools to *create* such an initrd
may not be availble.  So trying to tell dracut to generate an
lz4-compressed image just because we can decode such an image is
completely inappropriate.

Cc: J P <ppandit@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Beulich <JBeulich@suse.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>