Change the parameters of `comedi_buf_put()` to pass a pointer to the
comedi subdevice instead of a pointer to the "async" structure belonging
to the subdevice.

The function puts a sample value in the comedi buffer, but currently
only deals with 16-bit sample types.  A future version could deal with
16 or 32-bit sample types depending on the value of the SDF_LSAMPL
subdevice flag.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The Diamond Systems OPMM-1616-XT board is a PC/104 module with 16
optoisolated inputs and 16 relay outputs.

The PEARL-MM-P board is a PC/104 module with 16 relay outputs.

Both of these boards can be supported by the pcl730 driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_fc helper cfc_check_trigger_arg_is() to validate the
scan_begin_arg when the scan_begin_src is TRIG_TIMER.

For aesthetics reasons, rename the local variable 'tmp' to 'arg'.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the subdevice private data can be determined from the
cmd->stop_src. Do that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is a copy of the cmd->chanlist_len. Use
that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi_cmd pointer is typically just called 'cmd'. Rename the local
variable in pci9111_ai_do_cmd().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined by checking the
cmd->stop_src. Do that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set but never used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is not used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function so it has namespace associated
with the driver.

The divisors used to load the counters are stored in the private data.
Get them from there and remove the parameters.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function so it has namespace associated
with the driver.

Refactor the function to reduce the indent level and tidy up the code.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The devpriv->usedma flag can be checked to determine which handler
function should be used to transfer the analog input data. Do that
instead and remove the member from the private data.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only set when the analog input
subdevice maxdata is 0xffff. Just check the s->maxdata and remove
the private data member.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is always set to 0. Remove it and the
affected code.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to 0 but never used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set only used during the (*detach)
to check if the board can be reset. The pci9118_reset() function just
needs a valid dev->iobase. Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to 0 but never used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*do_cmdtest) only allows TRIG_COUNT, TRIG_NONE, or TRIG_EXT as the
cmd->stop_src. Remove the disabled code.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is only set when the cmd->convert_src
is TRIG_NOW. Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->stop_arg.
Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is always set to I8254_OSC_BASE_4MHZ.
Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->scan_end_arg.
Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set but never used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set but never used. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the s->async->prealloc_bufsz.
Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->chanlist.
Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is just a copy of the cmd->chanlist_len.
Use that instead.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the boardinfo about the interrupt function and just call it
directly.
Signed-off-by: NChase Southwood <chase.southwood@gmail.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is the only reset fuction used by this driver.  We can remove it from
the boardinfo and absorb the code from hwdrv_apci1564.c into the driver.
Signed-off-by: NChase Southwood <chase.southwood@gmail.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi-data common code always allocates 7 subdevices.  This driver
cannot or will not use the ones we are currently allocating for analog
input and output or EEPROM, so just don't allocate these subdevices at
all.
Signed-off-by: NChase Southwood <chase.southwood@gmail.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This board always has 32 digital outputs.  Remove the test when
initializing the subdevice.

Also, since this board is the only one supported by this driver, remove
the boardinfo about the digital outputs and just use the data directly in
the subdevice init.
Signed-off-by: NChase Southwood <chase.southwood@gmail.com>
Reviewed-by: NIan Abbott <abbotti@mev.co.uk>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed a few spaces to fix style errors
Signed-off-by: NMichele Curti <michele.curti@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For obvious error messages, use dev_err() in order to provide userspace
with more useful information and use the common kernel coding style.
Signed-off-by: NMartin Kepplinger <martink@posteo.de>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.

Verified by compilation only.

The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
- return ret;
+ return C;
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJames A Shackleford <shack@linux.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

I will be not able to work on ozwpan driver anymore.
Remove my name & add Tateno as maintainer.
Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com>
Acked-by: NShigekatsu Tateno <shigekatsu.tateno@atmel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ozwpan: ozproto.c fix for "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)"

Fixed the warning message by replacing memcpy() with ether_addr_copy()
Signed-off-by: NAnil Belur <askb23@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The "devs" is a pointer to g_net_dev in ozmain.c.
g_net_dev has a default value as empty string.
So "devs" cannot be NULL, removes NULL check for "devs".
Signed-off-by: NDaeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

To be future-proof and for better readability the time comparisons are modified
to use time_before() instead of plain, error-prone math.
Signed-off-by: NManuel Schölling <manuel.schoelling@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>