Due to the way kernel is initialized under Xen is possible that the
ring1 selector used by the kernel for the boot cpu end up to be copied
to userspace leading to segmentation fault in the userspace.

Xen code in the kernel initialize no-boot cpus with correct selectors (ds
and es set to __USER_DS) but the boot one keep the ring1 (passed by Xen).
On task context switch (switch_to) we assume that ds, es and cs already
point to __USER_DS and __KERNEL_CSso these selector are not changed.

If processor is an Intel that support sysenter instruction sysenter/sysexit
is used so ds and es are not restored switching back from kernel to
userspace. In the case the selectors point to a ring1 instead of __USER_DS
the userspace code will crash on first memory access attempt (to be
precise Xen on the emulated iret used to do sysexit will detect and set ds
and es to zero which lead to GPF anyway).

Now if an userspace process call kernel using sysenter and get rescheduled
(for me it happen on a specific init calling wait4) could happen that the
ring1 selector is set to ds and es.

This is quite hard to detect cause after a while these selectors are fixed
(__USER_DS seems sticky).

Bisecting the code commit 7076aada appears
to be the first one that have this issue.
Signed-off-by: NFrediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NAndrew Cooper <andrew.cooper3@citrix.com>

Before this patch we would patch all of the pv_lock_ops sites
using alternative assembler. Then later in the bootup cycle
change the unlock_kick and lock_spinning to the Xen specific -
without re patching.

That meant that for the core of the kernel we would be running
with the baremetal version of unlock_kick and lock_spinning while
for modules we would have the proper Xen specific slowpaths.

As most of the module uses some API from the core kernel that ended
up with slowpath lockers waiting forever to be kicked (b/c they
would be using the Xen specific slowpath logic). And the
kick never came b/c the unlock path that was taken was the
baremetal one.

On PV we do not have the problem as we initialise before the
alternative code kicks in.

The fix is to make the updating of the pv_lock_ops function
be done before the alternative code starts patching.

Note that this patch fixes issues discovered by commit
f10cd522.
("xen: disable PV spinlocks on HVM") wherein it mentioned

   PV spinlocks cannot possibly work with the current code because they are
   enabled after pvops patching has already been done, and because PV
   spinlocks use a different data structure than native spinlocks so we
   cannot switch between them dynamically.

The first problem is solved by this patch.

The second problem has been solved by commit
816434ec
(Merge branch 'x86-spinlocks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip)

P.S.
There is still the commit 70dd4998
(xen/spinlock: Disable IRQ spinlock (PV) allocation on PVHVM) to
revert but that can be done later after all other bugs have been
fixed.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

The xen_lock_spinning has a check for the kicker interrupts
and if it is not initialized it will spin normally (not enter
the slowpath).

But for PVHVM case we would initialize the kicker interrupt
before the CPU came online. This meant that if the booting
CPU used a spinlock and went in the slowpath - it would
enter the slowpath and block forever. The forever part because
during bootup: the spinlock would be taken _before_ the CPU
sets itself to be online (more on this further), and we enter
to poll on the event channel forever.

The bootup CPU (see commit fc78d343
"xen/smp: initialize IPI vectors before marking CPU online"
for details) and the CPU that started the bootup consult
the cpu_online_mask to determine whether the booting CPU should
get an IPI. The booting CPU has to set itself in this mask via:

  set_cpu_online(smp_processor_id(), true);

However, if the spinlock is taken before this (and it is) and
it polls on an event channel - it will never be woken up as
the kernel will never send an IPI to an offline CPU.

Note that the PVHVM logic in sending IPIs is using the HVM
path which has numerous checks using the cpu_online_mask
and cpu_active_mask. See above mention git commit for details.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

An older PVHVM guest (v3.0 based) crashed during vCPU hot-plug with:

	kernel BUG at drivers/xen/events.c:1328!

RCU has detected that a CPU has not entered a quiescent state within the
grace period.  It needs to send the CPU a reschedule IPI if it is not
offline.  rcu_implicit_offline_qs() does this check:

	/*
	 * If the CPU is offline, it is in a quiescent state.  We can
	 * trust its state not to change because interrupts are disabled.
	 */
	if (cpu_is_offline(rdp->cpu)) {
		rdp->offline_fqs++;
		return 1;
	}

	Else the CPU is online.  Send it a reschedule IPI.

The CPU is in the middle of being hot-plugged and has been marked online
(!cpu_is_offline()).  See start_secondary():

	set_cpu_online(smp_processor_id(), true);
	...
	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;

start_secondary() then waits for the CPU bringing up the hot-plugged CPU to
mark it as active:

	/*
	 * Wait until the cpu which brought this one up marked it
	 * online before enabling interrupts. If we don't do that then
	 * we can end up waking up the softirq thread before this cpu
	 * reached the active state, which makes the scheduler unhappy
	 * and schedule the softirq thread on the wrong cpu. This is
	 * only observable with forced threaded interrupts, but in
	 * theory it could also happen w/o them. It's just way harder
	 * to achieve.
	 */
	while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
		cpu_relax();

	/* enable local interrupts */
	local_irq_enable();

The CPU being hot-plugged will be marked active after it has been fully
initialized by the CPU managing the hot-plug.  In the Xen PVHVM case
xen_smp_intr_init() is called to set up the hot-plugged vCPU's
XEN_RESCHEDULE_VECTOR.

The hot-plugging CPU is marked online, not marked active and does not have
its IPI vectors set up.  rcu_implicit_offline_qs() sees the hot-plugging
cpu is !cpu_is_offline() and tries to send it a reschedule IPI:
This will lead to:

	kernel BUG at drivers/xen/events.c:1328!

	xen_send_IPI_one()
	xen_smp_send_reschedule()
	rcu_implicit_offline_qs()
	rcu_implicit_dynticks_qs()
	force_qs_rnp()
	force_quiescent_state()
	__rcu_process_callbacks()
	rcu_process_callbacks()
	__do_softirq()
	call_softirq()
	do_softirq()
	irq_exit()
	xen_evtchn_do_upcall()

because xen_send_IPI_one() will attempt to use an uninitialized IRQ for
the XEN_RESCHEDULE_VECTOR.

There is at least one other place that has caused the same crash:

	xen_smp_send_reschedule()
	wake_up_idle_cpu()
	add_timer_on()
	clocksource_watchdog()
	call_timer_fn()
	run_timer_softirq()
	__do_softirq()
	call_softirq()
	do_softirq()
	irq_exit()
	xen_evtchn_do_upcall()
	xen_hvm_callback_vector()

clocksource_watchdog() uses cpu_online_mask to pick the next CPU to handle
a watchdog timer:

	/*
	 * Cycle through CPUs to check if the CPUs stay synchronized
	 * to each other.
	 */
	next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
	if (next_cpu >= nr_cpu_ids)
		next_cpu = cpumask_first(cpu_online_mask);
	watchdog_timer.expires += WATCHDOG_INTERVAL;
	add_timer_on(&watchdog_timer, next_cpu);

This resulted in an attempt to send an IPI to a hot-plugging CPU that
had not initialized its reschedule vector. One option would be to make
the RCU code check to not check for CPU offline but for CPU active.
As becoming active is done after a CPU is online (in older kernels).

But Srivatsa pointed out that "the cpu_active vs cpu_online ordering has been
completely reworked - in the online path, cpu_active is set *before* cpu_online,
and also, in the cpu offline path, the cpu_active bit is reset in the CPU_DYING
notification instead of CPU_DOWN_PREPARE." Drilling in this the bring-up
path: "[brought up CPU].. send out a CPU_STARTING notification, and in response
to that, the scheduler sets the CPU in the cpu_active_mask. Again, this mask
is better left to the scheduler alone, since it has the intelligence to use it
judiciously."

The conclusion was that:
"
1. At the IPI sender side:

   It is incorrect to send an IPI to an offline CPU (cpu not present in
   the cpu_online_mask). There are numerous places where we check this
   and warn/complain.

2. At the IPI receiver side:

   It is incorrect to let the world know of our presence (by setting
   ourselves in global bitmasks) until our initialization steps are complete
   to such an extent that we can handle the consequences (such as
   receiving interrupts without crashing the sender etc.)
" (from Srivatsa)

As the native code enables the interrupts at some point we need to be
able to service them. In other words a CPU must have valid IPI vectors
if it has been marked online.

It doesn't need to handle the IPI (interrupts may be disabled) but needs
to have valid IPI vectors because another CPU may find it in cpu_online_mask
and attempt to send it an IPI.

This patch will change the order of the Xen vCPU bring-up functions so that
Xen vectors have been set up before start_secondary() is called.
It also will not continue to bring up a Xen vCPU if xen_smp_intr_init() fails
to initialize it.

Orabug 13823853
Signed-off-by Chuck Anderson <chuck.anderson@oracle.com>
Acked-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This is based on a patch that Zhenzhong Duan had sent - which
was missing some of the remaining pieces. The kernel has the
logic to handle Xen-type-exceptions using the paravirt interface
in the assembler code (see PARAVIRT_ADJUST_EXCEPTION_FRAME -
pv_irq_ops.adjust_exception_frame and and INTERRUPT_RETURN -
pv_cpu_ops.iret).

That means the nmi handler (and other exception handlers) use
the hypervisor iret.

The other changes that would be neccessary for this would
be to translate the NMI_VECTOR to one of the entries on the
ipi_vector and make xen_send_IPI_mask_allbutself use different
events.

Fortunately for us commit 1db01b49
(xen: Clean up apic ipi interface) implemented this and we piggyback
on the cleanup such that the apic IPI interface will pass the right
vector value for NMI.

With this patch we can trigger NMIs within a PV guest (only tested
x86_64).

For this to work with normal PV guests (not initial domain)
we need the domain to be able to use the APIC ops - they are
already implemented to use the Xen event channels. For that
to be turned on in a PV domU we need to remove the masking
of X86_FEATURE_APIC.

Incidentally that means kgdb will also now work within
a PV guest without using the 'nokgdbroundup' workaround.

Note that the 32-bit version is different and this patch
does not enable that.

CC: Lisa Nguyen <lisa@xenapiadmin.com>
CC: Ben Guthro <benjamin.guthro@citrix.com>
CC: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Fixed up per David Vrabel comments]
Reviewed-by: NBen Guthro <benjamin.guthro@citrix.com>
Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com>

There's no need to do it at very early init, and doing it there
makes it impossible to use the jump_label machinery.
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Link: http://lkml.kernel.org/r/1376058122-8248-5-git-send-email-raghavendra.kt@linux.vnet.ibm.comReviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

When the user does:
echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online

kmemleak reports:
kmemleak: 7 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

unreferenced object 0xffff88003fa51240 (size 32):
  comm "swapper/0", pid 1, jiffies 4294667339 (age 1027.789s)
  hex dump (first 32 bytes):
    72 65 73 63 68 65 64 31 00 00 00 00 00 00 00 00  resched1........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81660721>] kmemleak_alloc+0x21/0x50
    [<ffffffff81190aac>] __kmalloc_track_caller+0xec/0x2a0
    [<ffffffff812fe1bb>] kvasprintf+0x5b/0x90
    [<ffffffff812fe228>] kasprintf+0x38/0x40
    [<ffffffff81047ed1>] xen_smp_intr_init+0x41/0x2c0
    [<ffffffff816636d3>] xen_cpu_up+0x393/0x3e8
    [<ffffffff8166bbf5>] _cpu_up+0xd1/0x14b
    [<ffffffff8166bd48>] cpu_up+0xd9/0xec
    [<ffffffff81ae6e4a>] smp_init+0x4b/0xa3
    [<ffffffff81ac4981>] kernel_init_freeable+0xdb/0x1e6
    [<ffffffff8165ce39>] kernel_init+0x9/0xf0
    [<ffffffff8167edfc>] ret_from_fork+0x7c/0xb0
    [<ffffffffffffffff>] 0xffffffffffffffff

This patch fixes some of it by using the 'struct xen_common_irq->name'
field to stash away the char so that it can be freed when
the interrupt line is destroyed.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When we free it we want to make sure to set it to a default
value of -1 so that we don't double-free it (in case somebody
calls us twice).
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This patch adds a new structure to contain the common two things
that each of the per-cpu interrupts need:
 - an interrupt number,
 - and the name of the interrupt (to be added in 'xen/smp: Don't leak
   interrupt name when offlining').

This allows us to carry the tuple of the per-cpu interrupt data structure
and expand it as we need in the future.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There are two functions that do a bunch of 'free_irq' on
the per_cpu IRQ. Instead of having duplicate code just move
it to one function.

This is just code movement.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The xen_play_dead is an undead function. When the vCPU is told to
offline it ends up calling xen_play_dead wherin it calls the
VCPUOP_down hypercall which offlines the vCPU. However, when the
vCPU is onlined back, it resumes execution right after
VCPUOP_down hypercall.

That was OK (albeit the API for play_dead assumes that the CPU
stays dead and never returns) but with commit 4b0c0f29
(tick: Cleanup NOHZ per cpu data on cpu down) that is no longer safe
as said commit resets the ts->inidle which at the start of the
cpu_idle loop was set.

The net effect is that we get this warn:

Broke affinity for irq 16
installing Xen timer for CPU 1
cpu 1 spinlock event irq 48
------------[ cut here ]------------
WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0()
Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.10.0-rc3upstream-00068-gdcdbe33a #1
Hardware name: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 09/03/2009
 ffffffff8193b448 ffff880039da5e60 ffffffff816707c8 ffff880039da5ea0
 ffffffff8108ce8b ffff880039da4010 ffff88003fa8e500 ffff880039da4010
 0000000000000001 ffff880039da4000 ffff880039da4010 ffff880039da5eb0
Call Trace:
 [<ffffffff816707c8>] dump_stack+0x19/0x1b
 [<ffffffff8108ce8b>] warn_slowpath_common+0x6b/0xa0
 [<ffffffff8108ced5>] warn_slowpath_null+0x15/0x20
 [<ffffffff810e4745>] tick_nohz_idle_exit+0x195/0x1b0
 [<ffffffff810da755>] cpu_startup_entry+0x205/0x250
 [<ffffffff81661070>] cpu_bringup_and_idle+0x13/0x15
---[ end trace 915c8c486004dda1 ]---

b/c ts_inidle is set to zero. Thomas suggested that we just add a workaround
to call tick_nohz_idle_enter before returning from xen_play_dead() - and
that is what this patch does and fixes the issue.

We also add the stable part b/c git commit 4b0c0f29 is on the stable
tree.

CC: stable@vger.kernel.org
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Commit f447d56d introduced the
implementation of the PV apic ipi interface. But there were some
odd things (it seems none of which cause really any issue but
maybe they should be cleaned up anyway):
 - xen_send_IPI_mask_allbutself (and by that xen_send_IPI_allbutself)
   ignore the passed in vector and only use the CALL_FUNCTION_SINGLE
   vector. While xen_send_IPI_all and xen_send_IPI_mask use the vector.
 - physflat_send_IPI_allbutself is declared unnecessarily. It is never
   used.

This patch tries to clean up those things.
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The "xen_cpu_die" and "xen_hvm_cpu_die" are very similar.
Lets coalesce them.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

There is no need to use the PV version of the IRQ_WORKER mechanism
as under PVHVM we are using the native version. The native
version is using the SMP API.

They just sit around unused:

  69:          0          0  xen-percpu-ipi       irqwork0
  83:          0          0  xen-percpu-ipi       irqwork1
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

While we don't use the spinlock interrupt line (see for details
commit f10cd522 -
xen: disable PV spinlocks on HVM) - we should still do the proper
init / deinit sequence. We did not do that correctly and for the
CPU init for PVHVM guest we would allocate an interrupt line - but
failed to deallocate the old interrupt line.

This resulted in leakage of an irq_desc but more importantly this splat
as we online an offlined CPU:

genirq: Flags mismatch irq 71. 0002cc20 (spinlock1) vs. 0002cc20 (spinlock1)
Pid: 2542, comm: init.late Not tainted 3.9.0-rc6upstream #1
Call Trace:
 [<ffffffff811156de>] __setup_irq+0x23e/0x4a0
 [<ffffffff81194191>] ? kmem_cache_alloc_trace+0x221/0x250
 [<ffffffff811161bb>] request_threaded_irq+0xfb/0x160
 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20
 [<ffffffff813a8423>] bind_ipi_to_irqhandler+0xa3/0x160
 [<ffffffff81303758>] ? kasprintf+0x38/0x40
 [<ffffffff8104c6f0>] ? xen_spin_trylock+0x20/0x20
 [<ffffffff810cad35>] ? update_max_interval+0x15/0x40
 [<ffffffff816605db>] xen_init_lock_cpu+0x3c/0x78
 [<ffffffff81660029>] xen_hvm_cpu_notify+0x29/0x33
 [<ffffffff81676bdd>] notifier_call_chain+0x4d/0x70
 [<ffffffff810bb2a9>] __raw_notifier_call_chain+0x9/0x10
 [<ffffffff8109402b>] __cpu_notify+0x1b/0x30
 [<ffffffff8166834a>] _cpu_up+0xa0/0x14b
 [<ffffffff816684ce>] cpu_up+0xd9/0xec
 [<ffffffff8165f754>] store_online+0x94/0xd0
 [<ffffffff8141d15b>] dev_attr_store+0x1b/0x20
 [<ffffffff81218f44>] sysfs_write_file+0xf4/0x170
 [<ffffffff811a2864>] vfs_write+0xb4/0x130
 [<ffffffff811a302a>] sys_write+0x5a/0xa0
 [<ffffffff8167ada9>] system_call_fastpath+0x16/0x1b
cpu 1 spinlock event irq -16
smpboot: Booting Node 0 Processor 1 APIC 0x2

And if one looks at the /proc/interrupts right after
offlining (CPU1):

  70:          0          0  xen-percpu-ipi       spinlock0
  71:          0          0  xen-percpu-ipi       spinlock1
  77:          0          0  xen-percpu-ipi       spinlock2

There is the oddity of the 'spinlock1' still being present.

CC: stable@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In the PVHVM path when we do CPU online/offline path we would
leak the timer%d IRQ line everytime we do a offline event. The
online path (xen_hvm_setup_cpu_clockevents via
x86_cpuinit.setup_percpu_clockev) would allocate a new interrupt
line for the timer%d.

But we would still use the old interrupt line leading to:

kernel BUG at /home/konrad/ssd/konrad/linux/kernel/hrtimer.c:1261!
invalid opcode: 0000 [#1] SMP
RIP: 0010:[<ffffffff810b9e21>]  [<ffffffff810b9e21>] hrtimer_interrupt+0x261/0x270
.. snip..
 <IRQ>
 [<ffffffff810445ef>] xen_timer_interrupt+0x2f/0x1b0
 [<ffffffff81104825>] ? stop_machine_cpu_stop+0xb5/0xf0
 [<ffffffff8111434c>] handle_irq_event_percpu+0x7c/0x240
 [<ffffffff811175b9>] handle_percpu_irq+0x49/0x70
 [<ffffffff813a74a3>] __xen_evtchn_do_upcall+0x1c3/0x2f0
 [<ffffffff813a760a>] xen_evtchn_do_upcall+0x2a/0x40
 [<ffffffff8167c26d>] xen_hvm_callback_vector+0x6d/0x80
 <EOI>
 [<ffffffff81666d01>] ? start_secondary+0x193/0x1a8
 [<ffffffff81666cfd>] ? start_secondary+0x18f/0x1a8

There is also the oddity (timer1) in the /proc/interrupts after
offlining CPU1:

  64:       1121          0  xen-percpu-virq      timer0
  78:          0          0  xen-percpu-virq      timer1
  84:          0       2483  xen-percpu-virq      timer2

This patch fixes it.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: stable@vger.kernel.org

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130321215235.486594473@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org

The PV and PVH code CPU init code share some functionality. The
PVH code ("xen/pvh: Extend vcpu_guest_context, p2m, event, and XenBus")
sets some of these up, but not all. To make it easier to read, this
patch removes the PV specific out of the generic way.

No functional change - just code movement.
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
[v2: Fixed compile errors noticed by Fengguang Wu build system]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This reverts commit 41bd956d.

The fix is incorrect and not appropiate for the latest kernels.
In fact it _causes_ the BUG: scheduling while atomic while
doing vCPU hotplug.
Suggested-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Git commit 30106c17
("x86, hotplug: Support functions for CPU0 online/offline") alters what
the call to smp_store_cpu_info() does. For BSP we should use the
smp_store_boot_cpu_info() and for secondary CPU's the old
variant of smp_store_cpu_info() should be used. This fixes
the regression introduced by said commit.
Reported-and-Tested-by: NSander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We still patch SMP instructions to UP variants if we boot with a
single CPU, but not at any other time.  In particular, not if we
unplug CPUs to return to a single cpu.

Paul McKenney points out:

 mean offline overhead is 6251/48=130.2 milliseconds.

 If I remove the alternatives_smp_switch() from the offline
 path [...] the mean offline overhead is 550/42=13.1 milliseconds

Basically, we're never going to get those 120ms back, and the
code is pretty messy.

We get rid of:

 1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the
    documentation is wrong. It's now the default.

 2) The skip_smp_alternatives flag used by suspend.

 3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end()
    which were only used to set this one flag.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paul.mckenney@us.ibm.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.auSigned-off-by: NIngo Molnar <mingo@kernel.org>

ipi_call_lock/unlock() lock resp. unlock call_function.lock. This lock
protects only the call_function data structure itself, but it's
completely unrelated to cpu_online_mask. The mask to which the IPIs
are sent is calculated before call_function.lock is taken in
smp_call_function_many(), so the locking around set_cpu_online() is
pointless and can be removed.

[ tglx: Massaged changelog ]
Signed-off-by: NYong Zhang <yong.zhang0@gmail.com>
Cc: ralf@linux-mips.org
Cc: sshtylyov@mvista.com
Cc: david.daney@cavium.com
Cc: nikunj@linux.vnet.ibm.com
Cc: paulmck@linux.vnet.ibm.com
Cc: axboe@kernel.dk
Cc: peterz@infradead.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1338275765-3217-7-git-send-email-yong.zhang0@gmail.comAcked-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The git commit  1ff2b0c3
"xen: implement IRQ_WORK_VECTOR handler" added the functionality
to have a per-cpu "irqworkX" for the IPI APIC functionality.
However it missed the unbind when a vCPU is unplugged resulting
in an orphaned per-cpu interrupt line for unplugged vCPU:

  30:        216          0   xen-dyn-event     hvc_console
  31:        810          4   xen-dyn-event     eth0
  32:         29          0   xen-dyn-event     blkif
- 36:          0          0  xen-percpu-ipi       irqwork2
- 37:        287          0   xen-dyn-event     xenbus
+ 36:        287          0   xen-dyn-event     xenbus
 NMI:          0          0   Non-maskable interrupts
 LOC:          0          0   Local timer interrupts
 SPU:          0          0   Spurious interrupts
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NLin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Map native ipi vector to xen vector.
Implement apic ipi interface with xen_send_IPI_one.
Tested-by: NSteven Noonan <steven@uplinklabs.net>
Signed-off-by: NBen Guthro <ben@guthro.net>
Signed-off-by: NLin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When we boot on a machine that can hotplug CPUs and we
are using 'dom0_max_vcpus=X' on the Xen hypervisor line
to clip the amount of CPUs available to the initial domain,
we get this:

(XEN) Command line: com1=115200,8n1 dom0_mem=8G noreboot dom0_max_vcpus=8 sync_console mce_verbosity=verbose console=com1,vga loglvl=all guest_loglvl=all
.. snip..
DMI: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x032.072520111118 07/25/2011
.. snip.
SMP: Allowing 64 CPUs, 32 hotplug CPUs
installing Xen timer for CPU 7
cpu 7 spinlock event irq 361
NMI watchdog: disabled (cpu7): hardware events not enabled
Brought up 8 CPUs
.. snip..
	[acpi processor finds the CPUs are not initialized and starts calling
	arch_register_cpu, which creates /sys/devices/system/cpu/cpu8/online]
CPU 8 got hotplugged
CPU 9 got hotplugged
CPU 10 got hotplugged
.. snip..
initcall 1_acpi_battery_init_async+0x0/0x1b returned 0 after 406 usecs
calling  erst_init+0x0/0x2bb @ 1

	[and the scheduler sticks newly started tasks on the new CPUs, but
	said CPUs cannot be initialized b/c the hypervisor has limited the
	amount of vCPUS to 8 - as per the dom0_max_vcpus=8 flag.
	The spinlock tries to kick the other CPU, but the structure for that
	is not initialized and we crash.]
BUG: unable to handle kernel paging request at fffffffffffffed8
IP: [<ffffffff81035289>] xen_spin_lock+0x29/0x60
PGD 180d067 PUD 180e067 PMD 0
Oops: 0002 [#1] SMP
CPU 7
Modules linked in:

Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc2upstream-00001-gf5154e8 #1 Intel Corporation S2600CP/S2600CP
RIP: e030:[<ffffffff81035289>]  [<ffffffff81035289>] xen_spin_lock+0x29/0x60
RSP: e02b:ffff8801fb9b3a70  EFLAGS: 00010282

With this patch, we cap the amount of vCPUS that the initial domain
can run, to exactly what dom0_max_vcpus=X has specified.

In the future, if there is a hypercall that will allow a running
domain to expand past its initial set of vCPUS, this patch should
be re-evaluated.

CC: stable@kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20120420124557.246929343@linutronix.de

Preparatory patch to use the generic idle thread allocation.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20120420124557.176604405@linutronix.de

There is an extra and unnecessary call to smp_processor_id()
in cpu_bringup(). Remove it.
Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The CPU hotplug code has now a callback to help bring up the CPU.
Without the call we end up getting:

 BUG: soft lockup - CPU#0 stuck for 29s! [migration/0:6]
Modules linked in:
CPU ] Pid: 6, comm: migration/0 Not tainted 3.3.0upstream-01180-ged378a52 #1 Dell Inc. PowerEdge T105 /0RR825
RIP: e030:[<ffffffff810d3b8b>]  [<ffffffff810d3b8b>] stop_machine_cpu_stop+0x7b/0xf0
RSP: e02b:ffff8800ceaabdb0  EFLAGS: 00000293
.. snip..
Call Trace:
 [<ffffffff810d3b10>] ? stop_one_cpu_nowait+0x50/0x50
 [<ffffffff810d3841>] cpu_stopper_thread+0xf1/0x1c0
 [<ffffffff815a9776>] ? __schedule+0x3c6/0x760
 [<ffffffff815aa749>] ? _raw_spin_unlock_irqrestore+0x19/0x30
 [<ffffffff810d3750>] ? res_counter_charge+0x150/0x150
 [<ffffffff8108dc76>] kthread+0x96/0xa0
 [<ffffffff815b27e4>] kernel_thread_helper+0x4/0x10
 [<ffffffff815aacbc>] ? retint_restore_ar

Thix fixes it.
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When a user offlines a VCPU and then onlines it, we get:

NMI watchdog disabled (cpu2): hardware events not enabled
BUG: scheduling while atomic: swapper/2/0/0x00000002
Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbco
 ttm bitblit softcursor drm_kms_helper xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs [last unloaded:

Pid: 0, comm: swapper/2 Tainted: G           O 3.2.0phase15.1-00003-gd6f7f5b-dirty #4
Call Trace:
 [<ffffffff81070571>] __schedule_bug+0x61/0x70
 [<ffffffff8158eb78>] __schedule+0x798/0x850
 [<ffffffff8158ed6a>] schedule+0x3a/0x50
 [<ffffffff810349be>] cpu_idle+0xbe/0xe0
 [<ffffffff81583599>] cpu_bringup_and_idle+0xe/0x10

The reason for this should be obvious from this call-chain:
cpu_bringup_and_idle:
 \- cpu_bringup
  |   \-[preempt_disable]
  |
  |- cpu_idle
       \- play_dead [assuming the user offlined the VCPU]
       |     \
       |     +- (xen_play_dead)
       |          \- HYPERVISOR_VCPU_off [so VCPU is dead, once user
       |          |                       onlines it starts from here]
       |          \- cpu_bringup [preempt_disable]
       |
       +- preempt_enable_no_reschedule()
       +- schedule()
       \- preempt_enable()

So we have two preempt_disble() and one preempt_enable(). Calling
preempt_enable() after the cpu_bringup() in the xen_play_dead
fixes the imbalance.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them
for further code clean up.

I don't know much of xen code. But, since the code is in x86 architecture,
the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the
change is safe.
Signed-off-by: NAlex Shi <alex.shi@intel.com>
Acked-by: NChristoph Lameter <cl@gentwo.org>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

PV spinlocks cannot possibly work with the current code because they are
enabled after pvops patching has already been done, and because PV
spinlocks use a different data structure than native spinlocks so we
cannot switch between them dynamically. A spinlock that has been taken
once by the native code (__ticket_spin_lock) cannot be taken by
__xen_spin_lock even after it has been released.
Reported-and-Tested-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

We have hit a couple of customer bugs where they would like to
use those parameters to run an UP kernel - but both of those
options turn of important sources of interrupt information so
we end up not being able to boot. The correct way is to
pass in 'dom0_max_vcpus=1' on the Xen hypervisor line and
the kernel will patch itself to be a UP kernel.

Fixes bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308

CC: stable@kernel.org
Acked-by: NIan Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Fix regression for HVM case on older (<4.1.1) hypervisors caused by

  commit 99bbb3a8
  Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
  Date:   Thu Dec 2 17:55:10 2010 +0000

    xen: PV on HVM: support PV spinlocks and IPIs

This change replaced the SMP operations with event based handlers without
taking into account that this only works when the hypervisor supports
callback vectors. This causes unexplainable hangs early on boot for
HVM guests with more than one CPU.

BugLink: http://bugs.launchpad.net/bugs/791850

CC: stable@kernel.org
Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-and-Reported-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

The MAXSMP config option requires CPUMASK_OFFSTACK, which in turn
requires we init the memory for the maps while we bring up the cpus.
MAXSMP also increases NR_CPUS to 4096. This increase in size exposed an
issue in the argument construction for multicalls from
xen_flush_tlb_others. The args should only need space for the actual
number of cpus.

Also in 2.6.39 it exposes a bootup problem.

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff8157a1d3>] set_cpu_sibling_map+0x123/0x30d
...
Call Trace:
[<ffffffff81039a3f>] ? xen_restore_fl_direct_reloc+0x4/0x4
[<ffffffff819dc4db>] xen_smp_prepare_cpus+0x36/0x135
..

CC: stable@kernel.org
Signed-off-by: NAndrew Jones <drjones@redhat.com>
[v2: Updated to compile on 3.0]
[v3: Updated to compile when CONFIG_SMP is not defined]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: NDaniel Kiper <dkiper@net-space.pl>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

For future rework of try_to_wake_up() we'd like to push part of that
function onto the CPU the task is actually going to run on.

In order to do so we need a generic callback from the existing scheduler IPI.

This patch introduces such a generic callback: scheduler_ipi() and
implements it as a NOP.

BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions!
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl

Initialize PV spinlocks on boot CPU right after native_smp_prepare_cpus
(that switch to APIC mode and initialize APIC routing); on secondary
CPUs on CPU_UP_PREPARE.

Enable the usage of event channels to send and receive IPIs when
running as a PV on HVM guest.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>