This way we type less characters and it looks more like the
kzalloc kernel counterpart.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259071517-3242-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

And also express its configuration toggles via a struct.

Now all one has to do is to call symbol__init(NULL) if the
defaults are OK, or pass a struct symbol_conf pointer with the
desired configuration.

If a tool uses kernel_maps__find_symbol() to look at the kernel
and modules mappings for a symbol but didn't call symbol__init()
first, that will generate a one time warning too, alerting the
subcommand developer that symbol__init() must be called.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259071517-3242-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ingo found it confusing, and I agree with that, for 'perf
report' its OK because it is static, but for a tool refreshing
it the eventual switch from column to summary at the top may
seem confusing.
Suggested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259071517-3242-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prevent bit-rot in perf-annotate by using common functions where
possible. Here we create process_events.[ch] to hold the common
functions.
Signed-off-by: NJohn Kacur <jkacur@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
LKML-Reference: <1259073301-11506-3-git-send-email-jkacur@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NJohn Kacur <jkacur@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: acme@redhat.com
LKML-Reference: <1259073301-11506-2-git-send-email-jkacur@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add Documentation/perf-kmem.txt
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <4B0B6EAF.80802@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Show statistics for allocations and frees on different cpus:

------------------------------------------------------------------------------------------------------
Callsite                           | Total_alloc/Per | Total_req/Per   | Hit   | Ping-pong | Frag
------------------------------------------------------------------------------------------------------
 perf_event_alloc.clone.0+0         |      7504/682   |      7128/648   |     11 |        0 |  5.011%
 alloc_buffer_head+16               |       288/57    |       280/56    |      5 |        0 |  2.778%
 radix_tree_preload+51              |       296/296   |       288/288   |      1 |        0 |  2.703%
 tracepoint_add_probe+32e           |       157/31    |       154/30    |      5 |        0 |  1.911%
 do_maps_open+0                     |       796/12    |       792/12    |     66 |        0 |  0.503%
 sock_alloc_send_pskb+16e           |     23780/495   |     23744/494   |     48 |       38 |  0.151%
 anon_vma_prepare+9a                |      3744/44    |      3740/44    |     85 |        0 |  0.107%
 d_alloc+21                         |     64948/164   |     64944/164   |    396 |        0 |  0.006%
 proc_alloc_inode+23                |    262292/676   |    262288/676   |    388 |        0 |  0.002%
 create_object+28                   |    459600/200   |    459600/200   |   2298 |       71 |  0.000%
 journal_start+67                   |     14440/40    |     14440/40    |    361 |        0 |  0.000%
 get_empty_filp+df                  |     53504/256   |     53504/256   |    209 |        0 |  0.000%
 getname+2a                         |    823296/4096  |    823296/4096  |    201 |        0 |  0.000%
 seq_read+2b0                       |    544768/4096  |    544768/4096  |    133 |        0 |  0.000%
 seq_open+6d                        |     17024/128   |     17024/128   |    133 |        0 |  0.000%
 mmap_region+2e6                    |     11704/88    |     11704/88    |    133 |        0 |  0.000%
 single_open+0                      |      1072/16    |      1072/16    |     67 |        0 |  0.000%
 __alloc_skb+2e                     |     12544/256   |     12544/256   |     49 |       38 |  0.000%
 __sigqueue_alloc+4a                |      1296/144   |      1296/144   |      9 |        8 |  0.000%
 tracepoint_add_probe+6f            |        80/16    |        80/16    |      5 |        0 |  0.000%
------------------------------------------------------------------------------------------------------
...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <4B0B6E9F.6020309@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Show cross node memory allocations:

 # ./perf kmem

 SUMMARY
 =======
 ...
 Cross node allocations: 0/3633
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <4B0B6E87.10906@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make the output sort by fragmentation by default.

Also make the usage of "--sort" option consistent with other
perf tools. That is, we support multi keys: "--sort
key1[,key2]...".

 # ./perf kmem --stat caller
 ------------------------------------------------------------------------------
 Callsite                    |Total_alloc/Per | Total_req/Per | Hit  | Frag
 ------------------------------------------------------------------------------
 __netdev_alloc_skb+23       |    5048/1682   |    4564/1521  |     3|   9.588%
 perf_event_alloc.clone.0+0  |    7504/682    |    7128/648   |    11|   5.011%
 tracepoint_add_probe+32e    |     157/31     |     154/30    |     5|   1.911%
 alloc_buffer_head+16        |     456/57     |     448/56    |     8|   1.754%
 radix_tree_preload+51       |     584/292    |     576/288   |     2|   1.370%
 ...

TODO:
- Extract duplicate code in builtin-kmem.c and builtin-sched.c
  into util/sort.c.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <4B0B6E72.7010200@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add option "--raw-ip" to show raw ip instead of symbols:

 # ./perf kmem --stat caller --raw-ip
 ------------------------------------------------------------------------------
 Callsite                    |Total_alloc/Per | Total_req/Per | Hit  | Frag
 ------------------------------------------------------------------------------
 0xc05301aa                  |  733184/4096   |  733184/4096  |   179|   0.000%
 0xc0542ba0                  |  483328/4096   |  483328/4096  |   118|   0.000%
 ...

Also show symbols with format sym+offset instead of sym/offset.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <4B0B6E5C.4080900@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, perf fails to compile on powerpc with this error:

     CC util/header.o
 In file included from util/../perf.h:17,
                  from util/header.c:9:
 util/../../../arch/powerpc/include/asm/unistd.h:360:27: error:
 linux/linkage.h: No such file or directory make: ***
 [util/header.o] Error 1

The reason is that we still have a #define __KERNEL__ in effect
at the point where <asm/unistd.h> gets included, which means we
get extra stuff that we don't need or want.

This fixes the problem by undefining __KERNEL__ once we have
included the file for which we need __KERNEL__ defined.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <19211.24287.453183.78836@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

E.g.:

  [root@doppio linux-2.6-tip]# perf kmem record sleep 3s
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.804 MB perf.data (~35105 samples) ]

  [root@doppio linux-2.6-tip]# perf kmem --stat caller | head -10
  ------------------------------------------------------------------------------
  Callsite                    |Total_alloc/Per | Total_req/Per | Hit  | Frag
  ------------------------------------------------------------------------------
  getname/40                  | 1519616/4096   | 1519616/4096  |   371|   0.000%
  seq_read/a2                 |  987136/4096   |  987136/4096  |   241|   0.000%
  __netdev_alloc_skb/43       |  260368/1049   |  259968/1048  |   248|   0.154%
  __alloc_skb/5a              |   77312/256    |   77312/256   |   302|   0.000%
  proc_alloc_inode/33         |   76480/632    |   76472/632   |   121|   0.010%
  get_empty_filp/8d           |   70272/192    |   70272/192   |   366|   0.000%
  split_vma/8e                |   42064/176    |   42064/176   |   239|   0.000%
  [root@doppio linux-2.6-tip]#
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1259005869-13487-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that they can be used in other tools.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259005869-13487-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that we can check the buildid to see if it really matches,
this can be done safely:

  vmlinux
  /boot/vmlinux
  /boot/vmlinux-<uts.release>
  /lib/modules/<uts.release>/build/vmlinux
  /usr/lib/debug/lib/modules/%s/vmlinux

More can be added - if you know about distros that put the
vmlinux somewhere else please let us know.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259001550-8194-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the breakpoint events support with this new sysnopsis:

  mem:addr[:access]

Where addr is a raw addr value in the kernel and access can be
either [r][w][x]

Example to profile tasklist_lock:

	$ grep tasklist_lock /proc/kallsyms
	ffffffff8189c000 D tasklist_lock

	$ perf record -e mem:0xffffffff8189c000:rw -a -f -c 1
	$ perf report

	# Samples: 62
	#
	# Overhead          Command  Shared Object  Symbol
	# ........  ...............  .............  ......
	#
	    29.03%          swapper  [kernel]       [k] _raw_read_trylock
	    29.03%          swapper  [kernel]       [k] _raw_read_unlock
	    19.35%             init  [kernel]       [k] _raw_read_trylock
	    19.35%             init  [kernel]       [k] _raw_read_unlock
	     1.61%         events/0  [kernel]       [k] _raw_read_trylock
	     1.61%         events/0  [kernel]       [k] _raw_read_unlock

Coming soon:

 - Support for symbols in the event definition.

 - Default period to 1 for breakpoint events because these are
   not high frequency events. The same thing is needed for trace
   events.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1258987355-8751-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>

Print more accurate error message when "perf record" fails because
there is no APIC support, on x86.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

gcc with no flags typically is a sane default for systems to
use, and looking at the running kernel is probably broken for
cross-builds anyway, so let's not do this.  Add EXTRA_CFLAGS so
that users can override default gcc mode if they want to.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NArjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122121335.GA24254@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Bug introduced in 439d473b,
making the initial map be used for all IPs, so that symbols
outside this initial map would either be erroneously resolved or
not resolve at all.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258909162-28496-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Suggested-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258903301-20584-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On error, suggest installing static libraries
along with shared libraries.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122131311.GA24318@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make standard error show up on console when V=2 is set.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <20091122112726.GC13644@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The write_event() function in builtin-record.c writes out all
mmap()'d DSOs including non-ELF files like GNOME resource files
and such.

Therefore, check for ELF_K_ELF in filename__read_build_id()
before attempting to read the ELF header with gelf_getehdr().

Fixes the following error messages when running "perf kmem
record":

  penberg@penberg-laptop:~/src/linux/tools/perf$ perf kmem record
  ^C[ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.753 MB perf.data (~32885 samples) ]
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
  filename__read_build_id: cannot get elf header.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1258885784-11709-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds support for "--sort hit" and "--sort frag" to
the "perf kmem" tool. The former was already mentioned in the
help text and the latter is useful for finding call-sites that
exhibit worst case behavior for SLAB allocators.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <1258883880-7149-1-git-send-email-penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

mem-memcpy.c uses perf event system calls to obtain CPU clocks.
And it suddenly dies with BUG_ON() when it running on Linux
doesn't support perf event.

Also fail at calloc() can occur easily when too large
length is passed. Fail of calloc() causes sudden death
with assert().

These behaviours are not friendly. So I fixed the treating of
errors.
Signed-off-by: NHitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1258688237-3797-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v2: improved a few small details ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It better propagate errors, also if we do a simple:

[root@doppio linux-2.6-tip]# perf record -R -a -f sleep 3s ;
perf trace [ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.182 MB perf.data (~7972 samples) ]
Fatal: not an trace data file
[root@doppio linux-2.6-tip]#

That is what is expected, right? I.e. as we didn't specify any
tracepoint event via -e, it should gracefully bail out and not
SEGFAULT.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-3-git-send-email-acme@infradead.org>
[ Fixed the error messages some more ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We better call this routine after both the kernel and modules
are loaded, because as it was if there weren't modules it would not
be called, resulting in kernel_map->end remaining at zero, so no
map would be found and consequently the kernel symtab wouldn't
get loaded, i.e. no kernel symbols would be resolved.

Also this fixes another case, that is when we _have_ modules,
but the last map would have its ->end address not set before we
loaded its symbols, which would never happen because ->end was
not set.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258821086-11521-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that the user have a clearer indication about the source of
the symbols, as we only state buildid mismatches in verbose
mode, because 'perf top' would overwrite such warning anyway.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-6-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

E.g.:

[root@doppio linux-2.6-tip]# perf top -v --vmlinux
../build/tip/vmlinux > /dev/null build_id in vmlinux is
e96699725a47413a50c231864a8e7a8ced40a31b while expected is
18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a, ignoring it

I.e. perf top was told to use a vmlinux file that is not the one
currently running on the machine, it ignores it and falls back
to using /proc/kallsyms.

This solves many, at first, mysterious results when people have
a stale vmlinux file while keeping the default of trying to use
the vmlinux file in the current directory in things like 'perf
annotate' where the DWARF info is required and thus we can't use
just /proc/kallsyms.

Modules buildids are already being checked as of the previous
changeset in this series, because we are using the default
dso__load routine, that will look at a series of places looking
for the best file with a matching buildid, starting in the
-debuginfo directories.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-5-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Just like we do with the other DSOs. This also simplifies the
kernel_maps setup process, now all that the tools need to do is
to call kernel_maps__init and the maps for the modules and
kernel will be created, then, later, when
kernel_maps__find_symbol() is used, it will also call
maps__find_symbol that already checks if the symtab was loaded,
loading it if needed.

Now if one does 'perf top --hide_kernel_symbols' we won't pay
the price of loading the (many) symbols in /proc/kallsyms or
vmlinux.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Will be used in more places.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In the kernel we have more than one notes section, so the linker
script combines all and puts them into a ".notes" combined
section. So we need to look at both sections and also traverse
them looking at multiple GElf_Nhdr entries till we find the one
we want, with the build_id.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It should just load kernel symbols, not load the list of
modules. There are more stuff to move to other routines, but
lets do it in several steps.

End goal is to be able to defer symbol table loading till we
find a hit for that map address range. So that the kernel &
modules are handled just like all the other DSOs in the system.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258757489-5978-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This tool is mostly a perf version of kmemtrace-user.

The following information is provided by this tool:

 - the total amount of memory allocated and fragmentation per
   call-site

 - the total amount of memory allocated and fragmentation per
   allocation

 - total memory allocated and fragmentation in the collected
   dataset - ...

Sample output:

 # ./perf kmem record
 ^C
 # ./perf kmem --stat caller --stat alloc -l 10

 ------------------------------------------------------------------------------
 Callsite          | Total_alloc/Per |  Total_req/Per  |  Hit   | Fragmentation
 ------------------------------------------------------------------------------
 0xc052f37a        |   790528/4096   |   790528/4096   |    193 |    0.000%
 0xc0541d70        |   524288/4096   |   524288/4096   |    128 |    0.000%
 0xc051cc68        |   481600/200    |   481600/200    |   2408 |    0.000%
 0xc0572623        |   297444/676    |   297440/676    |    440 |    0.001%
 0xc05399f1        |    73476/164    |    73472/164    |    448 |    0.005%
 0xc05243bf        |    51456/256    |    51456/256    |    201 |    0.000%
 0xc0730d0e        |    31844/497    |    31808/497    |     64 |    0.113%
 0xc0734c4e        |    17152/256    |    17152/256    |     67 |    0.000%
 0xc0541a6d        |    16384/128    |    16384/128    |    128 |    0.000%
 0xc059c217        |    13120/40     |    13120/40     |    328 |    0.000%
 0xc0501ee6        |    11264/88     |    11264/88     |    128 |    0.000%
 0xc04daef0        |     7504/682    |     7128/648    |     11 |    5.011%
 0xc04e14a3        |     4216/191    |     4216/191    |     22 |    0.000%
 0xc05041ca        |     3524/44     |     3520/44     |     80 |    0.114%
 0xc0734fa3        |     2104/701    |     1620/540    |      3 |   23.004%
 0xc05ec9f1        |     2024/289    |     2016/288    |      7 |    0.395%
 0xc06a1999        |     1792/256    |     1792/256    |      7 |    0.000%
 0xc0463b9a        |     1584/144    |     1584/144    |     11 |    0.000%
 0xc0541eb0        |     1024/16     |     1024/16     |     64 |    0.000%
 0xc06a19ac        |      896/128    |      896/128    |      7 |    0.000%
 0xc05721c0        |      772/12     |      768/12     |     64 |    0.518%
 0xc054d1e6        |      288/57     |      280/56     |      5 |    2.778%
 0xc04b562e        |      157/31     |      154/30     |      5 |    1.911%
 0xc04b536f        |       80/16     |       80/16     |      5 |    0.000%
 0xc05855a0        |       64/64     |       36/36     |      1 |   43.750%
 ------------------------------------------------------------------------------

 ------------------------------------------------------------------------------
 Alloc Ptr         | Total_alloc/Per |  Total_req/Per  |  Hit   | Fragmentation
 ------------------------------------------------------------------------------
 0xda884000        |  1052672/4096   |  1052672/4096   |    257 |    0.000%
 0xda886000        |   262144/4096   |   262144/4096   |     64 |    0.000%
 0xf60c7c00        |    16512/128    |    16512/128    |    129 |    0.000%
 0xf59a4118        |    13120/40     |    13120/40     |    328 |    0.000%
 0xdfd4b2c0        |    11264/88     |    11264/88     |    128 |    0.000%
 0xf5274600        |     7680/256    |     7680/256    |     30 |    0.000%
 0xe8395000        |     5948/594    |     5464/546    |     10 |    8.137%
 0xe59c3c00        |     5748/479    |     5712/476    |     12 |    0.626%
 0xf4cd1a80        |     3524/44     |     3520/44     |     80 |    0.114%
 0xe5bd1600        |     2892/482    |     2856/476    |      6 |    1.245%
 ...               | ...             | ...             | ...    | ...
 ------------------------------------------------------------------------------

SUMMARY
=======
Total bytes requested: 2333626
Total bytes allocated: 2353712
Total bytes wasted on internal fragmentation: 20086
Internal fragmentation: 0.853375%

TODO:
- show sym+offset in 'callsite' column
- show cross node allocation stats
- collect more useful stats?
- ...
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
LKML-Reference: <4B064AF5.9060208@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Propagate the error, that, interestingly, are already handled by
all callers :-)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This time in perf_header__adds_write, propagating the do_write
error returns.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

And also don't call the constructor in it, this way it adheres
to the model the other methods follow.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258649757-17554-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[root@doppio linux-2.6-tip]# perf record -a -f sleep 3s ; perf
buildid-list | grep vmlinux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.171 MB perf.data (~7489
samples) ] 18e7cc53db62a7d35e9d6f6c9ddc23017d38ee9a vmlinux
[root@doppio linux-2.6-tip]#

Several refactorings were needed so that we can have symmetry
between dsos__load_modules() and dsos__load_kernel(), i.e. those
functions will respectively create and add to the dsos list the
loaded modules and kernel, with its buildids, but not load its
symbols. That is something the subcomands that need will have to
call dso__load_kernel_sym(), just like we do with modules with
dsos__load_module_sym()/dso__load_module_sym().

Next csets will actually use this info to stop producing bogus
results using mismatched vmlinux and .ko files.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[root@doppio linux-2.6-tip]# perf record -a sleep 2s;perf
buildid-list|tail [ perf record: Woken up 1 times to write data
] [ perf record: Captured and wrote 0.162 MB perf.data (~7078
samples) ] 881588fa57b3c1696bc91e5e804a11304f093535 [cfg80211]
4d47ce1da9d16bad00c962c072451b7c681e82df [snd_page_alloc]
5146377e89a7caac617f9782f1a02e46263d3a31 [rfkill]
2153b937bff0d345fea83b63a2e1d3138569f83d [i915]
4e6fb1bb97362e3ee4d306988b9ad6912d5fb9ae [drm_kms_helper]
f56ef2bf853e3a798f0d8d51f797622e5dc4420e [drm]
b0d157a3b5c4e017329ffc07c64623cd6ad65e95 [i2c_algo_bit]
8125374b905ef9fa8b65d98e166b008ad952f198 [i2c_core]
fc875c6e5a90e7b915e9d445d0efc859e1b2678c [video]
4b43c5006589f977e9762fdfc7ac1a92b72fca52 [output]
[root@doppio linux-2.6-tip]#

elfutils libdwfl/linux-kernel-modules.c was used as reference,
as suggested by Roland McGrath.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

No need for this struct and its allocations, we can just use the
->build_id member we already have in struct dso, then ask for it
to be read, and later traverse the dsos list, writing the
buildid table to the perf.data file.

As a bonus, one more die() function got killed.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1258582853-8579-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>