- 10 2月, 2008 2 次提交
-
-
由 Willy Tarreau 提交于
The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards run on a 32.768 kHz digital watch crystal. In practise, it will not change the timer's frequency as the skew was only 2.4%, but it should provide more accurate intervals. Signed-off-by: NWilly Tarreau <w@1wt.eu> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andres Salomon 提交于
- uninline timer functions; the compiler knows better than we do whether or not to inline these. - mfgpt_start_timer() had an unused 'clock' argument, drop it. From both Jordan and myself. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndres Salomon <dilinger@debian.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 09 2月, 2008 3 次提交
-
-
由 David Howells 提交于
Remove now unnecessary inclusions of {asm,linux}/a.out.h. [akpm@linux-foundation.org: fix alpha build] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set. Not all architectures support the A.OUT binfmt, so the ELF binfmt should not be permitted to go looking for A.OUT libraries to load in such a case. Not only that, but under such conditions A.OUT core dumps are not produced either. To make this work, this patch also does the following: (1) Makes the existence of the contents of linux/a.out.h contingent on CONFIG_ARCH_SUPPORTS_AOUT. (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT core dumping code. (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline. This is then included only where needed. This means that this bit of arch code will be stored in the appropriate A.OUT binfmt module rather than the core kernel. (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not needed) and FRV. This patch depends on the previous patch to move STACK_TOP[_MAX] out of asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT format is available. [jdike@addtoit.com: uml: re-remove accidentally restored code] Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NJeff Dike <jdike@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Li Zefan 提交于
Fix typo in comments. BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise checkpatch.pl will be complaining. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2008 3 次提交
-
-
由 Ken'ichi Ohmichi 提交于
This patch fixes the configuration dependencies in the vmcoreinfo data. i386's "node_data" is defined in arch/x86/mm/discontig_32.c, and x86_64's one is defined in arch/x86/mm/numa_64.c. They depend on CONFIG_NUMA: arch/x86/mm/Makefile_32:7 obj-$(CONFIG_NUMA) += discontig_32.o arch/x86/mm/Makefile_64:7 obj-$(CONFIG_NUMA) += numa_64.o ia64's "pgdat_list" is defined in arch/ia64/mm/discontig.c, and it depends on CONFIG_DISCONTIGMEM and CONFIG_SPARSEMEM: arch/ia64/mm/Makefile:9-10 obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_SPARSEMEM) += discontig.o ia64's "node_memblk" is defined in arch/ia64/mm/numa.c, and it depends on CONFIG_NUMA: arch/ia64/mm/Makefile:8 obj-$(CONFIG_NUMA) += numa.o Signed-off-by: NKen'ichi Ohmichi <oomichi@mxs.nes.nec.co.jp> Acked-by: NSimon Horman <horms@verge.net.au> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bernhard Walle 提交于
Use the BOOTMEM_EXCLUSIVE, introduced in the previous patch, to avoid conflicts while reserving the memory for the kdump capture kernel (crashkernel=). Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bernhard Walle 提交于
This patchset adds a flags variable to reserve_bootmem() and uses the BOOTMEM_EXCLUSIVE flag in crashkernel reservation code to detect collisions between crashkernel area and already used memory. This patch: Change the reserve_bootmem() function to accept a new flag BOOTMEM_EXCLUSIVE. If that flag is set, the function returns with -EBUSY if the memory already has been reserved in the past. This is to avoid conflicts. Because that code runs before SMP initialisation, there's no race condition inside reserve_bootmem_core(). [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: <linux-arch@vger.kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 2月, 2008 20 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1238:9: warning: symbol '__ptr' shadows an earlier one arch/x86/kernel/cpu/cpufreq/powernow-k8.c:1238:9: originally declared here Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Jesse Ahrens 提交于
Patch by VIA that updates e_powersaver.c to work with our model D parts and newer. From: Jesse Ahrens <jahrens@centtech.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mark Langsdorf 提交于
The latest series of Turion X2 processors have a new XFAM model. Add support for them to powernow-k8.h. Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Yinghai Lu 提交于
powernow-k8: Found 1 Quad-Core AMD Opteron(tm) Processor 8354 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : fid 0x0 did 0x0 (2200 MHz) powernow-k8: 1 : fid 0x0 did 0x0 (2000 MHz) powernow-k8: 2 : fid 0x0 did 0x0 (1700 MHz) powernow-k8: 3 : fid 0x0 did 0x0 (1400 MHz) powernow-k8: 4 : fid 0x0 did 0x0 (1100 MHz) actually index for CPU_HW_PSTATE is pstate instead of fid/vid So print it out as pstate. powernow-k8: Found 1 Quad-Core AMD Opteron(tm) Processor 8354 processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (2000 MHz) powernow-k8: 2 : pstate 2 (1700 MHz) powernow-k8: 3 : pstate 3 (1400 MHz) powernow-k8: 4 : pstate 4 (1100 MHz) Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: "Langsdorf, Mark" <mark.langsdorf@amd.com> Cc: "Herrmann3, Andreas" <Andreas.Herrmann3@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Young 提交于
In preemptible kernel will report BUG: using smp_processor_id() in preemptible, so use boot_cpu_data instead of current_cpu_data. discussion in : http://lkml.org/lkml/2007/7/25/32Signed-off-by: NDave Young <hidave.darkstar@gmail.com> CC: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
X86_ELAN already depends on X86_32 Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Yinghai Lu 提交于
Pavel Emelyanov reported that his networking card did not work and bisected it down to: " The commit 093af8d7 x86_32: trim memory by updating e820 broke my e1000 card: on loading driver says that e1000: probe of 0000:04:03.0 failed with error -5 and the interface doesn't appear. " on a 32-bit kernel, base will overflow when try to do PAGE_SHIFT, and highest_addr will always less 4G. So use pfn instead of address to avoid the overflow when more than 4g RAM is installed on a 32-bit kernel. Many thanks to Pavel Emelyanov for reporting and testing it. Bisected-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Tested-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
fix 64-bit section warnings. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arjan van de Ven 提交于
The .rodata section shouldn't just be read-only, but also non-executable. This is free since we've broken up the 2MB page already anyway. also update test_nx to check for this. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland McGrath 提交于
This change broke recovery of exceptions in iret: commit 72fe4858 Author: Glauber de Oliveira Costa <gcosta@redhat.com> x86: replace privileged instructions with paravirt macros The ENTRY(native_iret) macro adds alignment padding before the iretq instruction, so "iret_label" no longer points exactly at the instruction. It was sloppy to leave the old "iret_label" label behind when replacing its nearby use. Removing it would have revealed the other use of the label later in the file, and upon noticing that use, anyone exercising the minimum of attention to detail expected of anyone touching this subtle code would realize it needed to change as well. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
arch/x86/kernel/cpu/cpufreq/powernow-k8.c:830:7: warning: symbol 'hi' shadows an earlier one arch/x86/kernel/cpu/cpufreq/powernow-k8.c:824:6: originally declared here arch/x86/kernel/cpu/cpufreq/powernow-k8.c:830:15: warning: symbol 'lo' shadows an earlier one arch/x86/kernel/cpu/cpufreq/powernow-k8.c:824:14: originally declared here Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
This was being used to ensure the proper alignment of the FXSAVE/FXRSTOR data. This would create a sparse error in the _correct_ cases, hiding further warnings. Use BUILD_BUG_ON instead. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Harvey Harrison 提交于
arch/x86/kernel/quirks.c:384:3: warning: returning void-valued expression arch/x86/kernel/quirks.c:387:3: warning: returning void-valued expression arch/x86/kernel/quirks.c:390:3: warning: returning void-valued expression arch/x86/kernel/quirks.c:393:3: warning: returning void-valued expression Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland McGrath 提交于
In my revamp of the x86 ptrace code for setting register values, I accidentally omitted a check that was there in the old code. Allowing %cs to be 0 causes a bad crash in recovery from iret failure. This patch fixes that regression against 2.6.24, and adds a comment that should help prevent this subtlety from being overlooked again. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland McGrath 提交于
Unify the x86-64 behavior for 32-bit processes that set bogus %cs/%ss values (the only ones that can fault in iret) match what the native i386 behavior is. (do not kill the task via do_exit but generate a SIGSEGV signal) [ tglx@linutronix.de: build fix ] Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Adrian Bunk 提交于
Fix the following section mismatch with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x399a6): Section mismatch: reference to .init.text.5:idle_regs (between 'fork_idle' and 'get_task_mm') Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 2月, 2008 4 次提交
-
-
由 FUJITA Tomonori 提交于
This patch converts gart IOMMU to use the IOMMU helper functions. The IOMMU doesn't allocate a memory area spanning LLD's segment boundary anymore. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
This patch converts calgary IOMMU to use the IOMMU helper functions. The IOMMU doesn't allocate a memory area spanning LLD's segment boundary anymore. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Muli Ben-Yehuda <mulix@mulix.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
This patch makes pci-gart iommu respect segment size limits when merging sg lists. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Davide Libenzi 提交于
Wires up the new timerfd API to the x86 family. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 2月, 2008 8 次提交
-
-
由 Andi Kleen 提交于
pci-gart needs to unmap the IOMMU aperture to prevent cache corruptions. Switch this over to using set_memory_np() instead of clear_kernel_mapping(). Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
Fix up all users. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Huang, Ying 提交于
The patch updates EFI runtime memory mapping code, by making EFI areas explicitly executable. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
mtrr.h was included everywhere needed. Fixes the following sparse warnings. Also, the return types in the extern definitions were incorrect. arch/x86/kernel/cpu/mtrr/amd.c:113:12: warning: symbol 'amd_init_mtrr' was not declared. Should it be static? arch/x86/kernel/cpu/mtrr/cyrix.c:268:12: warning: symbol 'cyrix_init_mtrr' was not declared. Should it be static? arch/x86/kernel/cpu/mtrr/centaur.c:218:12: warning: symbol 'centaur_init_mtrr' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
cpu.h was already included everywhere needed. Fixes following sparse warnings: arch/x86/kernel/cpu/amd.c:343:12: warning: symbol 'amd_init_cpu' was not declared. Should it be static? arch/x86/kernel/cpu/cyrix.c:444:12: warning: symbol 'cyrix_init_cpu' was not declared. Should it be static? arch/x86/kernel/cpu/cyrix.c:456:12: warning: symbol 'nsc_init_cpu' was not declared. Should it be static? arch/x86/kernel/cpu/centaur.c:467:12: warning: symbol 'centaur_init_cpu' was not declared. Should it be static? arch/x86/kernel/cpu/transmeta.c:112:12: warning: symbol 'transmeta_init_cpu' was not declared. Should it be static? arch/x86/kernel/cpu/intel.c:296:12: warning: symbol 'intel_cpu_init' was not declared. Should it be static? arch/x86/kernel/cpu/nexgen.c:56:12: warning: symbol 'nexgen_init_cpu' was not declared. Should it be static? arch/x86/kernel/cpu/umc.c:22:12: warning: symbol 'umc_init_cpu' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
arch/x86/kernel/process_32.c:254:43: warning: Using plain integer as NULL pointer Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Harvey Harrison 提交于
Fixes sparse warning: arch/x86/kernel/cpu/intel.c:48:15: warning: symbol 'ppro_with_ram_bug' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Cyrill Gorcunov 提交于
This patch eliminates numbers in LDT allocation code trying to make it clear to understand from where these numbers come. No code changed: text data bss dec hex filename 1896 0 0 1896 768 ldt.o.before 1896 0 0 1896 768 ldt.o.after md5: 6cbec8705008ddb4b704aade60bceda3 ldt.o.before.asm 6cbec8705008ddb4b704aade60bceda3 ldt.o.after.asm Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-