Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 3月, 2014 1 次提交
  3. 14 3月, 2014 1 次提交
    • D
      perf tools: Fix synthesizing mmaps for threads · bfd66cc7
      由 Don Zickus 提交于 
      Currently if a process creates a bunch of threads using pthread_create
and then perf is run in system_wide mode, the mmaps for those threads
are not captured with a synthesized mmap event.

The reason is those threads are not visible when walking the /proc/
directory looking for /proc/<pid>/maps files.  Instead they are
discovered using the /proc/<pid>/tasks file (which the synthesized comm
event uses).

This causes problems when a program is trying to map a data address to a
tid.  Because the tid has no maps, the event is dropped.  Changing the
program to look up using the pid instead of the tid, finds the correct
maps but creates ugly hacks in the program to carry the correct tid
around.

Fix this by moving the walking of the /proc/<pid>/tasks up a level (out
of the comm function) based on Arnaldo's suggestion.

Tweaked things a bit to special case the 'full' bit and 'guest' check.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1393429527-167840-2-git-send-email-dzickus@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bfd66cc7
  5. 01 2月, 2014 2 次提交
  7. 13 1月, 2014 1 次提交
  9. 24 12月, 2013 5 次提交
  11. 20 12月, 2013 1 次提交
    • A
      perf symbols: Add 'machine' member to struct addr_location · cc22e575
      由 Arnaldo Carvalho de Melo 提交于 
      The addr_location struct should fully qualify an address, and to do that
it should have in it the machine where the thread was found.

Thus all functions that receive an addr_location now don't need to also
receive a 'machine', those functions just need to access al->machine
instead, just like it does with the other parts of an address location:
al->thread, al->map, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-o51iiee7vyq4r3k362uvuylg@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cc22e575
  13. 13 12月, 2013 1 次提交
  15. 28 11月, 2013 1 次提交
  17. 15 11月, 2013 1 次提交
    • D
      perf tools: Synthesize anon MMAP records again · 9d4ecc88
      由 Don Zickus 提交于 
      When introducing the PERF_RECORD_MMAP2 in:

5c5e854b perf tools: Add attr->mmap2 support

A check for the number of entries parsed by sscanf was introduced that
assumed all of the 8 fields needed to be correctly parsed so that
particular /proc/pid/maps line would be considered synthesizable.

That broke anon records synthesizing, as it doesn't have the 'execname'
field.

Fix it by keeping the sscanf return check, changing it to not require
that the 'execname' variable be parsed, so that the preexisting logic
can kick in and set it to '//anon'.

This should get things like JIT profiling working again.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: Bill Gray <bgray@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/n/tip-bo4akalno7579shpz29u867j@git.kernel.org
[ commit log message is mine, dzickus reported the problem with a patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9d4ecc88
  19. 12 11月, 2013 1 次提交
  21. 06 11月, 2013 1 次提交
  23. 04 11月, 2013 2 次提交
  25. 28 10月, 2013 1 次提交
  27. 18 10月, 2013 1 次提交
    • S
      perf: Disable PERF_RECORD_MMAP2 support · 3090ffb5
      由 Stephane Eranian 提交于 
      For now, we disable the extended MMAP record support (MMAP2).

We have identified cases where it would not report the correct mapping
information, clone(VM_CLONE) but with separate pids.  We will revisit
the support once we find a solution for this case.

The patch changes the kernel to return EINVAL if attr->mmap2 is set. The
patch also modifies the perf tool to use regular PERF_RECORD_MMAP for
synthetic events and it also prevents the tool from requesting
attr->mmap2 mode because the kernel would reject it.

The support will be revisited once the kenrel interface is updated.

In V2, we reduce the patch to the strict minimum.

In V3, we avoid calling perf_event_open() with mmap2 set because we know
it will fail and require fallback retry.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131017173215.GA8820@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3090ffb5
  29. 11 9月, 2013 1 次提交
    • S
      perf tools: Add attr->mmap2 support · 5c5e854b
      由 Stephane Eranian 提交于 
      This patch adds support for the new PERF_RECORD_MMAP2 record type
exposed by the kernel. This is an extended PERF_RECORD_MMAP record.

It adds for each file-backed mapping the device major, minor number and
the inode number and generation.

This triplet uniquely identifies the source of a file-backed mapping. It
can be used to detect identical virtual mappings between processes, for
instance.

The patch will prefer MMAP2 over MMAP.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1377079825-19057-3-git-send-email-eranian@google.com
[ Cope with 314add6b "Change machine__findnew_thread() to set thread pid",
  fix 'perf test' regression test entry affected,
  use perf_missing_features.mmap2 to fallback to not using .mmap2 in older kernels,
  so that new tools can work with kernels where this feature is not present ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      5c5e854b
  31. 30 8月, 2013 1 次提交
  33. 29 8月, 2013 1 次提交
  35. 12 8月, 2013 3 次提交
  37. 08 8月, 2013 1 次提交
  39. 13 7月, 2013 1 次提交
  41. 30 1月, 2013 1 次提交
  43. 15 11月, 2012 1 次提交
  45. 25 10月, 2012 1 次提交
  47. 07 10月, 2012 2 次提交
    • A
      perf machine: Carve up event processing specific from perf_tool · b0a7d1a0
      由 Arnaldo Carvalho de Melo 提交于 
      The perf_tool vtable expects methods that receive perf_tool and
perf_sample entries, but for tools not interested in doing any special
processing on non PERF_RECORD_SAMPLE events, like 'perf top', and for
those not using perf_session, like 'perf trace', they were using
perf_event__process passing tool and sample paramenters that were just
not used.

Provide 'machine' methods for this purpose and make the perf_event
ones use them.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ot9cc6mt025o8kbngzckcrx9@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      b0a7d1a0
    • A
      perf event: No need to create a thread when handling PERF_RECORD_EXIT · f62d3f0f
      由 Arnaldo Carvalho de Melo 提交于 
      When we were processing a PERF_RECORD_EXIT event we first used
machine__findnew_thread for both the thread exiting and for its parent,
only to use just the thread struct associated with the one exiting, and
to just delete it.

If it existed, i.e. not created at this very moment in
machine__findnew_thread, it will be moved to the machine->dead_threads
linked list, because we may have hist_entries pointing to it, but if it
was created just do be deleted, it will just sit there with no
references at all.

Use the new machine__find_thread() method so that if it is not there, we
don't create it.

As a bonus the parent thread will also not be created at this point.

Create process_fork() and process_exit() helpers to use this and make
the builtins use it instead of the generic process_task(), ditched by
this patch.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-z7n2y98ebjyrvmytaope4vdl@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f62d3f0f
  49. 18 9月, 2012 1 次提交
  51. 11 9月, 2012 2 次提交
    • I
      perf tools: Use __maybe_used for unused variables · 1d037ca1
      由 Irina Tirdea 提交于 
      perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05d in builtin-sched.c ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1d037ca1
    • I
      perf tools: fix ALIGN redefinition in system headers · 9ac3e487
      由 Irina Tirdea 提交于 
      On some systems (e.g. Android), ALIGN is defined in system headers as
ALIGN(p).  The definition of ALIGN used in perf takes 2 parameters:
ALIGN(x,a).  This leads to redefinition conflicts.

Redefinition error on Android:
In file included from util/include/linux/list.h:1:0,
from util/callchain.h:5,
from util/hist.h:6,
from util/session.h:4,
from util/build-id.h:4,
from util/annotate.c:11:
util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror]
bionic/libc/include/sys/param.h:38:0: note: this is the location of
the previous definition

Conflics with system defined ALIGN in Android:
util/event.c: In function 'perf_event__synthesize_comm':
util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1
util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function)
util/event.c:115:9: note: each undeclared identifier is reported only once for
each function it appears in

In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9ac3e487
  53. 06 9月, 2012 1 次提交
  55. 14 8月, 2012 1 次提交
    • C
      perf symbols: Remove unused 'end' arg in kallsyms parse cb · 82151520
      由 Cody P Schafer 提交于 
      kallsyms__parse() takes a callback that is called on every discovered
symbol. As /proc/kallsyms does not supply symbol sizes, the callback was
simply called with end=start, faking the symbol size to 1.

All of the callbacks (there are 2) used in calls to kallsyms__parse()
are _only_ used as callbacks for kallsyms__parse().

Given that kallsyms__parse() lacks real information about what
end/length should be, don't make up a length in kallsyms__parse().
Instead have the callbacks handle guessing the length.

Also relocate a comment regarding symbol creation to the callback which
does symbol creation (kallsyms__parse() is not in general used to create
symbols).
Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com>
Cc: David Hansen <dave@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Hellsley <matthltc@us.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1344637382-22789-3-git-send-email-cody@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      82151520
  57. 01 3月, 2012 1 次提交
  59. 07 2月, 2012 1 次提交
    • J
      perf tools: Fix prefix matching for kernel maps · bf32c9eb
      由 Jiri Olsa 提交于 
      In some perf ancient versions we used '[kernel.kallsyms._text]' as the
name for the kernel map.

This got changed with commit:
  perf: 'perf kvm' tool for monitoring guest performance from host
  commit a1645ce1
  Author: Zhang, Yanmin <yanmin_zhang@linux.intel.com>

and we started to use following name '[kernel.kallsyms]_text'.

This name change is important for the report code dealing with ancient
perf data. When processing the kernel map event, we need to recognize
the old naming (dont match the last ']') and initialize the kernel map
correctly.

The subsequent call to maps__set_kallsyms_ref_reloc_sym deals with the
superfluous ']' to get correct symbol name.

Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328461865-6127-1-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@redhat.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bf32c9eb