Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Acked-by: NDonghwa Lee <dh09.lee@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare
calls as required by common clock framework.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Save and restore register context of LCDC respectively
before suspend and after resume.
Signed-off-by: NManjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Add pm_runtime support to the da8xx-fb frame buffer driver.
Signed-off-by: NManjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Line 0 and 1 were both written to line 0 (on the display) and all subsequent
lines had an offset of -1. The result was that the last line on the display
was never overwritten by writes to /dev/fbN.

Cc: stable@vger.kernel.org
Signed-off-by: NAlexander Holler <holler@ahsoftware.de>
Acked-by: NBernie Thompson <bernie@plugable.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

'dsim' is allocated and checked for NULL in the probe function.
Hence this check is redundant. This cleanup also fixes a potential NULL
pointer dereference error when dsim which is NULL references its member
in the error print message.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This code is never executed and hence removed.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Acked-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This driver doesn't need to use these mach includes so remove
them. This is a necessary step to support a single zImage.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>
Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

The value of AUX channel differential amplitude current is changed
from 8 mA to 16 mA, in order to increase AUX channel voltage level.
In this case, AUX channel voltage level can be changed from 400 mV
to 800 mV, when resistance between AUX TX and RX is 100 ohm.

According to DP spec, although the normative voltage level is 390 mV,
the informative voltage level is 430 mV. So, 800 mV can be helpful
to improve voltage margin of AUX channel.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch adds bit-masking for LINK_TRAINING_CTL register, when
pre-emphasis level is set. The bit 3 and bit 2 of LINK_TRAINING_CTL
register are used for pre-emphasis level setting, so other bits
should be masked.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch fixes the checkpatch warnings listed below:

WARNING: usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt
WARNING: quoted string split across lines
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

printk calls are replaced by pr_* and dev_* calls to silence
checkpatch warnings.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Use devm_request_and_ioremap instead of request_mem_region + devm_ioremap.

This also fixes the following compile error introduced in commit b2ca7f4d
("drivers/video/jz4740_fb.c: use devm_ functions"):

drivers/video/jz4740_fb.c: In function 'jzfb_probe':
	drivers/video/jz4740_fb.c:676:2: error: implicit declaration of function 'devm_ioremap'
	drivers/video/jz4740_fb.c:676:13: warning: assignment makes pointer from integer without a cast
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

removes unnecessary semicolon

Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

It doesn't seem these spinlocks were properly initialized.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Using list_move_tail() instead of list_del() + list_add_tail().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5
instability," enabling or disabling the IGA1/IGA2 clocks causes occasional
stability problems during suspend/resume cycles on this platform.

This is rather odd, as the documentation suggests that clocks have two
states (on/off) and the default (stable) configuration is configured to
enable the clock only when it is needed. However, explicitly enabling *or*
disabling the clock triggers this system instability, suggesting that there
is a 3rd state at play here.

Leaving the clock enable/disable registers alone solves this problem.
This fixes spurious reboots during suspend/resume behaviour introduced by
commit b692a63a.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: stable@vger.kernel.org

To check channel equalization, the value of LANE_ALIGN_STATUS_UPDATED is
necessary in exynos_dp_channel_eq_ok(). Also, link_align includes this value.
However, link_status does not include this value, so it makes the problem
that channel equalization is failed during link training.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

It is expected that LCDC to continue to be disabled after
resume if it is blanked before suspend. This is also true
for DVFS. But it is observed that LCDC being enabled after
suspend/resume cycle or DVFS.

Correcting it by having check for FB_BLANK_UNBLANK before
enabling.
Signed-off-by: NManjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This fixes below build error:

  CC [M]  drivers/video/mbx/mbxfb.o
drivers/video/mbx/mbxfb.c: In function 'mbxfb_probe':
drivers/video/mbx/mbxfb.c:942:2: error: implicit declaration of function 'devm_ioremap_nocache' [-Werror=implicit-function-declaration]
drivers/video/mbx/mbxfb.c:942:22: warning: assignment makes pointer from integer without a cast [enabled by default]
drivers/video/mbx/mbxfb.c:952:21: warning: assignment makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch removes the video driver for pnx4008. The architecture is being
removed via the arm-soc tree.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Wait for active frame transfer to complete after disabling LCDC.
At the same this wait is not be required when there are sync and
underflow errors.
Patch applies for revision 2 of LCDC present am335x.
More information on disable and reset sequence can be found in
section 13.4.6 of AM335x TRM @www.ti.com/am335x.
Signed-off-by: NManjunathappa, Prakash <prakash.pm@ti.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

the driver's module init and exit functions are calling
platform_driver_register and platform_driver_unregister and doing nothing
else.

This same as that of the module_platform_driver,
remove this init and exit functions and use the module_platform_driver instead
Signed-off-by: NDevendra Naga <develkernel412222@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch solves problems with the error handling by
introducing labels for proper error paths and it also
frees resources that where missed.
Signed-off-by: NEmil Goode <emilgoode@gmail.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

  The code 124 (0x7C, |) is rendered as a broken line in two
fonts, instead of a continuous line.  Some keyboards show a
"broken bar" on one of theirs keys, other show a (continuous)
"vertical line".
Signed-off-by: NBjarni Ingi Gislason <bjarniig@rhi.hi.is>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

SW reset sets DP TX to initial value, so configurations for analog parameter
and interrupt are not set properly. Therefore, exynos_dp_init_analog_param()
and exynos_dp_init_interrupt() should be moved to after sw reset is called,
in order to set these values properly.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch changes return type of exynos_dp_init_video to void,
because the return value is unnecessary.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

Fix the return value of exynos_dp_get_pll_lock_status to
reflect what it actually returns.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NOlof Johansson <olofj@chromium.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>

This patch adds the function name to aux transaction failure messages
so we can tell which transaction is failing. It also changes the level
of Aux Transaction fail messages from error to debug. We retry the
transactions a few times and will report errors if warranted outside of
this function.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NBernie Thompson <bhthompson@chromium.org>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>