Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 24 6月, 2009 4 次提交
  3. 06 4月, 2009 3 次提交
    • E
      Audit: remove spaces from audit_log_d_path · def57543
      由 Eric Paris 提交于 
      audit_log_d_path had spaces in the strings which would be emitted on the
error paths.  This patch simply replaces those spaces with an _ or removes
the needless spaces entirely.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      def57543
    • M
      audit: ignore terminating NUL in AUDIT_USER_TTY messages · 55ad2f8d
      由 Miloslav Trmac 提交于 
      AUDIT_USER_TTY, like all other messages sent from user-space, is sent
NUL-terminated.  Unlike other user-space audit messages, which come only
from trusted sources, AUDIT_USER_TTY messages are processed using
audit_log_n_untrustedstring().

This patch modifies AUDIT_USER_TTY handling to ignore the trailing NUL
and use the "quoted_string" representation of the message if possible.
Signed-off-by: NMiloslav Trmac <mitr@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      55ad2f8d
    • M
      Audit: fix handling of 'strings' with NULL characters · b3897f56
      由 Miloslav Trmac 提交于 
      currently audit_log_n_untrustedstring() uses audit_string_contains_control()
to check if the 'string' has any control characters.  If the 'string' has an
embedded NULL audit_string_contains_control() will return that the data has
no control characters and will then pass the string to audit_log_n_string
with the total length, not the length up to the first NULL.
audit_log_n_string() does a memcpy of the entire length and so the actual
audit record emitted may then contain a NULL and then whatever random memory
is after the NULL.

Since we want to log the entire octet stream (if we can't trust the data
to be a string we can't trust that a NULL isn't actually a part of it)
we should just consider NULL as a control character.  If the caller is
certain they want to stop at the first NULL they should be using
audit_log_untrustedstring.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      b3897f56
  5. 09 12月, 2008 2 次提交
  7. 02 8月, 2008 2 次提交
  9. 25 6月, 2008 2 次提交
  11. 17 5月, 2008 1 次提交
  13. 28 4月, 2008 6 次提交
    • P
      [patch 2/2] Use find_task_by_vpid in audit code · 4a761b8c
      由 Pavel Emelyanov 提交于 
      The pid to lookup a task by is passed inside audit code via netlink message.

Thanks to Denis Lunev, netlink packets are now (since 2.6.24) _always_
processed in the context of the sending task.  So this is correct to lookup
the task with find_task_by_vpid() here.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      4a761b8c
    • H
      [PATCH 2/2] audit: fix sparse shadowed variable warnings · 7719e437
      由 Harvey Harrison 提交于 
      Use msglen as the identifier.
kernel/audit.c:724:10: warning: symbol 'len' shadows an earlier one
kernel/audit.c:575:8: originally declared here

Don't use ino_f to check the inode field at the end of the functions.
kernel/auditfilter.c:429:22: warning: symbol 'f' shadows an earlier one
kernel/auditfilter.c:420:21: originally declared here
kernel/auditfilter.c:542:22: warning: symbol 'f' shadows an earlier one
kernel/auditfilter.c:529:21: originally declared here

i always used as a counter for a for loop and initialized to zero before
use.  Eliminate the inner i variables.
kernel/auditsc.c:1295:8: warning: symbol 'i' shadows an earlier one
kernel/auditsc.c:1152:6: originally declared here
kernel/auditsc.c:1320:7: warning: symbol 'i' shadows an earlier one
kernel/auditsc.c:1152:6: originally declared here
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      7719e437
    • E
      Audit: standardize string audit interfaces · b556f8ad
      由 Eric Paris 提交于 
      This patch standardized the string auditing interfaces.  No userspace
changes will be visible and this is all just cleanup and consistancy
work.  We have the following string audit interfaces to use:

void audit_log_n_hex(struct audit_buffer *ab, const unsigned char *buf, size_t len);

void audit_log_n_string(struct audit_buffer *ab, const char *buf, size_t n);
void audit_log_string(struct audit_buffer *ab, const char *buf);

void audit_log_n_untrustedstring(struct audit_buffer *ab, const char *string, size_t n);
void audit_log_untrustedstring(struct audit_buffer *ab, const char *string);

This may be the first step to possibly fixing some of the issues that
people have with the string output from the kernel audit system.  But we
still don't have an agreed upon solution to that problem.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      b556f8ad
    • E
      Audit: stop deadlock from signals under load · f09ac9db
      由 Eric Paris 提交于 
      A deadlock is possible between kauditd and auditd under load if auditd
receives a signal.  When auditd receives a signal it sends a netlink
message to the kernel asking for information about the sender of the
signal.  In that same context the audit system will attempt to send a
netlink message back to the userspace auditd.  If kauditd has already
filled the socket buffer (see netlink_attachskb()) auditd will now put
itself to sleep waiting for room to send the message.  Since auditd is
responsible for draining that socket we have a deadlock.  The fix, since
the response from the kernel does not need to be synchronous is to send
the signal information back to auditd in a separate thread.  And thus
auditd can continue to drain the audit queue normally.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      f09ac9db
    • E
      Audit: save audit_backlog_limit audit messages in case auditd comes back · f3d357b0
      由 Eric Paris 提交于 
      This patch causes the kernel audit subsystem to store up to
audit_backlog_limit messages for use by auditd if it ever appears
sometime in the future in userspace.  This is useful to collect audit
messages during bootup and even when auditd is stopped.  This is NOT a
reliable mechanism, it does not ever call audit_panic, nor should it.
audit_log_lost()/audit_panic() are called during the normal delivery
mechanism.  The messages are still sent to printk/syslog as usual and if
too many messages appear to be queued they will be silently discarded.

I liked doing it by default, but this patch only uses the queue in
question if it was booted with audit=1 or if the kernel was built
enabling audit by default.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      f3d357b0
    • E
      Audit: collect sessionid in netlink messages · 2532386f
      由 Eric Paris 提交于 
      Previously I added sessionid output to all audit messages where it was
available but we still didn't know the sessionid of the sender of
netlink messages.  This patch adds that information to netlink messages
so we can audit who sent netlink messages.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      2532386f
  15. 19 4月, 2008 2 次提交
  17. 29 3月, 2008 1 次提交
  19. 21 3月, 2008 1 次提交
    • P
      audit: netlink socket can be auto-bound to pid other than current->pid (v2) · 75c0371a
      由 Pavel Emelyanov 提交于 
      From:	Pavel Emelyanov <xemul@openvz.org>

This patch is based on the one from Thomas.

The kauditd_thread() calls the netlink_unicast() and passes 
the audit_pid to it. The audit_pid, in turn, is received from 
the user space and the tool (I've checked the audit v1.6.9) 
uses getpid() to pass one in the kernel. Besides, this tool 
doesn't bind the netlink socket to this id, but simply creates 
it allowing the kernel to auto-bind one.

That's the preamble.

The problem is that netlink_autobind() _does_not_ guarantees
that the socket will be auto-bound to the current pid. Instead
it uses the current pid as a hint to start looking for a free
id. So, in case of conflict, the audit messages can be sent
to a wrong socket. This can happen (it's unlikely, but can be)
in case some task opens more than one netlink sockets and then
the audit one starts - in this case the audit's pid can be busy
and its socket will be bound to another id.

The proposal is to introduce an audit_nlk_pid in audit subsys,
that will point to the netlink socket to send packets to. It
will most often be equal to audit_pid. The socket id can be 
got from the skb's netlink CB right in the audit_receive_msg.
The audit_nlk_pid reset to 0 is not required, since all the
decisions are taken based on audit_pid value only.

Later, if the audit tools will bind the socket themselves, the
kernel will have to provide a way to setup the audit_nlk_pid
as well.

A good side effect of this patch is that audit_pid can later 
be converted to struct pid, as it is not longer safe to use 
pid_t-s in the presence of pid namespaces. But audit code still 
uses the tgid from task_struct in the audit_signal_info and in
the audit_filter_syscall.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      75c0371a
  21. 01 3月, 2008 2 次提交
    • S
      [PATCH] drop EOE records from printk · 8d07a67c
      由 Steve Grubb 提交于 
      Hi,

While we are looking at the printk issue, I see that its printk'ing the EOE
(end of event) records which is really not something that we need in syslog.
Its really intended for the realtime audit event stream handled by the audit
daemon. So, lets avoid printk'ing that record type.
Signed-off-by: NSteve Grubb <sgrubb@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      8d07a67c
    • E
      [RFC] AUDIT: do not panic when printk loses messages · b29ee87e
      由 Eric Paris 提交于 
      On the latest kernels if one was to load about 15 rules, set the failure
state to panic, and then run service auditd stop the kernel will panic.
This is because auditd stops, then the script deletes all of the rules.
These deletions are sent as audit messages out of the printk kernel
interface which is already known to be lossy.  These will overun the
default kernel rate limiting (10 really fast messages) and will call
audit_panic().  The same effect can happen if a slew of avc's come
through while auditd is stopped.

This can be fixed a number of ways but this patch fixes the problem by
just not panicing if auditd is not running.  We know printk is lossy and
if the user chooses to set the failure mode to panic and tries to use
printk we can't make any promises no matter how hard we try, so why try?
At least in this way we continue to get lost message accounting and will
eventually know that things went bad.

The other change is to add a new call to audit_log_lost() if auditd
disappears.  We already pulled the skb off the queue and couldn't send
it so that message is lost.  At least this way we will account for the
last message and panic if the machine is configured to panic.  This code
path should only be run if auditd dies for unforeseen reasons.  If
auditd closes correctly audit_pid will get set to 0 and we won't walk
this code path.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      b29ee87e
  23. 15 2月, 2008 2 次提交
  25. 02 2月, 2008 8 次提交
  27. 01 2月, 2008 1 次提交
  29. 21 10月, 2007 1 次提交
    • A
      [PATCH] audit: watching subtrees · 74c3cbe3
      由 Al Viro 提交于 
      New kind of audit rule predicates: "object is visible in given subtree".
The part that can be sanely implemented, that is.  Limitations:
	* if you have hardlink from outside of tree, you'd better watch
it too (or just watch the object itself, obviously)
	* if you mount something under a watched tree, tell audit
that new chunk should be added to watched subtrees
	* if you umount something in a watched tree and it's still mounted
elsewhere, you will get matches on events happening there.  New command
tells audit to recalculate the trees, trimming such sources of false
positives.

Note that it's _not_ about path - if something mounted in several places
(multiple mount, bindings, different namespaces, etc.), the match does
_not_ depend on which one we are using for access.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      74c3cbe3
  31. 19 10月, 2007 1 次提交
  33. 11 10月, 2007 1 次提交
    • D
      [NET]: make netlink user -> kernel interface synchronious · cd40b7d3
      由 Denis V. Lunev 提交于 
      This patch make processing netlink user -> kernel messages synchronious.
This change was inspired by the talk with Alexey Kuznetsov about current
netlink messages processing. He says that he was badly wrong when introduced 
asynchronious user -> kernel communication.

The call netlink_unicast is the only path to send message to the kernel
netlink socket. But, unfortunately, it is also used to send data to the
user.

Before this change the user message has been attached to the socket queue
and sk->sk_data_ready was called. The process has been blocked until all
pending messages were processed. The bad thing is that this processing
may occur in the arbitrary process context.

This patch changes nlk->data_ready callback to get 1 skb and force packet
processing right in the netlink_unicast.

Kernel -> user path in netlink_unicast remains untouched.

EINTR processing for in netlink_run_queue was changed. It forces rtnl_lock
drop, but the process remains in the cycle until the message will be fully
processed. So, there is no need to use this kludges now.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cd40b7d3