提交 · 35ec56bb78fda9c88cd1ad30e048ce5b4398d33f · openeuler / raspberrypi-kernel

19 1月, 2006 1 次提交

[PATCH] e1000: Added disable packet split capability · 35ec56bb

由 Jesse Brandeburg 提交于 1月 18, 2006

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware. Made this a CONFIG option and modified the Kconfig, to reflect the new option.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

35ec56bb

18 1月, 2006 23 次提交

[PATCH] skge: fix dma mask setup. · 77783a78

由 Stephen Hemminger 提交于 1月 05, 2006

There are a couple of problems in the DMA setup code for skge.
* In the 64 bit case, it doesn't set the consistent mask.
* In the 32 bit case, the error check is backwards!
It likely will only be visible as a bug on 64 bit platforms.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

77783a78

[PATCH] libata: Code for the IRQ mask flag · a1bd9e68

由 Alan Cox 提交于 1月 17, 2006

Signed-off-by: NAlan Cox <alan@redhat.com>

Somewhat cleaner in the resync as someone cleaned up the pio xfer users
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

a1bd9e68

A
[PATCH] libata: Fix sector lock to apply to both drives not drive 0 twice · 9d824d07
由 Alan Cox 提交于 1月 17, 2006
```
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
```
9d824d07
A
[PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add IRQ flag for next diff · 8d238e01
由 Alan Cox 提交于 1月 17, 2006
```
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
```
8d238e01

[PATCH] Intel ICH8 SATA: add PCI device IDs · 012b265f

由 Jason Gaston 提交于 1月 17, 2006

Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

012b265f

[PATCH] Fix warning with b44.c on 64bit boxes · 22d4d771

由 Alan Cox 提交于 1月 17, 2006

sizeof() return is not an int, so use max_t to get the types right.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

22d4d771

S
[PATCH] sky2: 0.13 version · 0570cc08
由 Stephen Hemminger 提交于 1月 17, 2006
```
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
```
0570cc08

[PATCH] sky2: more conservative transmit locking · 302d1252

由 Stephen Hemminger 提交于 1月 17, 2006

Be more careful about transmit locking, this solves a possible race
between tx_complete and transmit, that would cause a tx timeout.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

302d1252

[PATCH] sky2: don't inline so much · 28bd181a

由 Stephen Hemminger 提交于 1月 17, 2006

Don't need to inline quite so many routines, let the compiler
decide
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

28bd181a

[PATCH] sky2: use kzalloc · 6aad85d6

由 Stephen Hemminger 提交于 1月 17, 2006

Can use kzalloc here.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

6aad85d6

[PATCH] sky2: ratelimit error messages · 3be92a70

由 Stephen Hemminger 提交于 1月 17, 2006

Make sure and rate limit all the error messages that might occur. If a problem
occurs then a few messages are enough.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

3be92a70

[PATCH] sky2: optimize for 32 bit dma · a036119f

由 Stephen Hemminger 提交于 1月 17, 2006

Small optimization, if dma addresses are 32 bits, then high
bits are always zero.
Signed-off-by: NStephen Hemminger <shemminger@osdl.or>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

a036119f

[PATCH] sky2: don't bother clearing status ring elements · dc4d5ea2

由 Stephen Hemminger 提交于 1月 17, 2006

Don't need to zero out the status ring entries after processing.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

dc4d5ea2

[PATCH] sky2: write barrier's · 762c2de2

由 Stephen Hemminger 提交于 1月 17, 2006

Be more careful about memory barriers. The only place we really
need them is before and after updating the chip's ring interface.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

762c2de2

[PATCH] sky2: fix ram buffer for Yukon FE rev 2 · 1c28f6ba

由 Stephen Hemminger 提交于 1月 17, 2006

Fix problems with Yukon FE rev 2 chipset. Don't cut and paste bugs in from
sk98lin driver. Change how the ram buffer is divided up, and make the math
clearer. Also, set the thresholds where rx takes precedence. The threshold
values are just guesses at this point, it might be worth tuning them later.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

1c28f6ba

[PATCH] sky2: version 0.12 · e0c94455

由 Stephen Hemminger 提交于 1月 17, 2006

Version update.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

e0c94455

[PATCH] sky2: call pci_set_consistent_dma_mask · d1f3d4dd

由 Stephen Hemminger 提交于 1月 17, 2006

Need to call pci_set_consistent_dma_mask in the case of 64 bit
DMA.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

d1f3d4dd

[PATCH] sky2: receive buffer alignment · 82788c7a

由 Stephen Hemminger 提交于 1月 17, 2006

Need to make sure that sky2 receive buffers are 64 bit
aligned. Also, don't need to start off with GFP_ATOMIC
on initial setup.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

82788c7a

[PATCH] e100: e100 whitespace fixes · 05479938

由 Jesse Brandeburg 提交于 1月 17, 2006

e100: e100 whitespace fixes

These are whitespace only fixes.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

05479938

[PATCH] e100: Handle the return values from pci_* functions · 3435dbce

由 Jesse Brandeburg 提交于 1月 17, 2006

e100: Handle the return values from pci_* functions

This is to resolve warnings during compile time.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

3435dbce

[PATCH] e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue) · 24180333

由 Jesse Brandeburg 提交于 1月 17, 2006

e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)

Set the end of list bit to cause the hardware's transmit state machine to
work correctly and not prevent management (BMC) traffic.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

24180333

[SPARC]: Fix sbusfb build. · c7006638

由 David S. Miller 提交于 1月 17, 2006

sbusfb_compat_ioctl() needs to return int, not long, as that
is what the fb_ops->fb_compat_ioctl method prototype wants.

Need to git rid of the "struct file *file" first argument to
fbiogetputcmap() and fbiogscursor() to match calls done in
sbusfb_compat_ioctl().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

c7006638

[CASSINI]: Fix printk warning. · 64af4c13

由 Andrew Morton 提交于 1月 17, 2006

drivers/net/cassini.c:1930: warning: long unsigned int format, different type arg (arg 4)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

64af4c13

17 1月, 2006 16 次提交

[PATCH] libata: add a function to decide if we need iordy · 1bc4ccff

由 Alan Cox 提交于 1月 09, 2006

This ought to be simple but for PIO2 we have to poke around the drive
data to get it 100% correct.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

1bc4ccff

[PATCH] libata: Pre UDMA EIDE PIO mode selection · ffa29456

由 Alan Cox 提交于 1月 09, 2006

I misread the spec when doing the original. I've tested the corrected
version with pre UDMA drives and it now picks the right modes. This is a
specific bug fix rather than an update or new feature item.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

ffa29456

Y

[libata] sata_promise: add pci id · 5a46fe89
由 Yusuf Iskenderoglu 提交于 1月 17, 2006

5a46fe89
J

airo: Off-by-one channel fix · 2610c733
由 Javier Achirica 提交于 1月 17, 2006

2610c733
O

[libata] sata_svw: add pci id · 88b52877
由 Oliver Weihe 提交于 1月 17, 2006

88b52877

[PATCH] ahci: AHCI mode SATA patch for Intel ICH8 · f285757c

由 Jason Gaston 提交于 1月 09, 2006

This patch adds the Intel ICH8 DID's to the ahci.c file for AHCI mode
SATA support.
Signed-off-by: NJason Gaston <Jason.d.gaston@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

f285757c

[PATCH] e1000: Removed unused variables and initialized variables · 38bd3b26