- 09 6月, 2011 10 次提交
-
-
由 Andre Guedes 提交于
This patch adds a timer to clear 'adv_entries' after three minutes. After some amount of time, the advertising entries cached during the last LE scan should be considered expired and they should be removed from the advertising cache. It was chosen a three minutes timeout as an initial attempt. This value might change in future. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
The LE advertising cache should be cleared before performing a LE scanning. This will force the cache to contain only fresh advertising entries. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Andre Guedes 提交于
This patch implements the LE advertising cache. It stores sensitive information (bdaddr and bdaddr_type so far) gathered from LE advertising report events. Only advertising entries from connectables devices are added to the cache. Signed-off-by: NAndre Guedes <andre.guedes@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Anderson Briglia 提交于
This patch adds definitions and a new struct for Advertising Report Event from LE and Dual Mode controllers. Signed-off-by: NAnderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
To make it consistent with the rest of the API. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
The call to l2cap_chan_clear_timer() is not really needed in l2cap_sock.c. This patch also adds a call to l2cap_chan_clear_timer() to the only place in __l2cap_sock_close() that wasn't calling it. It's safe call it there because l2cap_chan_clear_timer() check first for timer_peding(). Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
The new timer does not belong to struct sock, tought it still touch some sock things, but this will be sorted out soon. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
chan_type says if our chan is raw(direclty access to HCI), connection less or connection oriented. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
This move all the sending logic to l2cap_core.c, but we still have a socket dependence there, struct msghdr. It will be removed in some of the further commits. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
由 Gustavo F. Padovan 提交于
This is actually __l2cap_sock_close() renamed to __l2cap_chan_close(). At a first look it may not make sense, but with the further cleanups that will come it will. Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>
-
- 08 6月, 2011 1 次提交
-
-
由 Shahar Levi 提交于
Some devices support BT/WLAN co-existence algorigthms. In order not to harm the system performance and user experience, the device requests not to allow any RX BA session and tear down existing RX BA sessions based on system constraints such as periodic BT activity that needs to limit WLAN activity (eg.SCO or A2DP). In such cases, the intention is to limit the duration of the RX PPDU and therefore prevent the peer device to use A-MPDU aggregation. Adding ieee80211_stop_rx_ba_session() callback that can be used by the driver to stop existing BA sessions. Signed-off-by: NShahar Levi <shahar_levi@ti.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 02 6月, 2011 1 次提交
-
-
由 Wey-Yi Guy 提交于
This adds dump support to testmode. The testmode dump support in nl80211 requires using two of the six cb->args, the rest can be used by the driver to figure out where the dump position is at or to store other data across invocations. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 28 5月, 2011 2 次提交
-
-
由 David S. Miller 提交于
Ingo Molnar noticed that we have this unnecessary ratelimit.h dependency in linux/net.h, which hid compilation problems from people doing builds only with CONFIG_NET enabled. Move this stuff out to a seperate net/net_ratelimit.h file and include that in the only two places where this thing is needed. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NIngo Molnar <mingo@elte.hu>
-
由 David S. Miller 提交于
Several networking headers were depending upon the implicit linux/sysctl.h include they get when including linux/net.h Add explicit includes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2011 1 次提交
-
-
由 Hans Schillstrom 提交于
When ip_vs was adapted to netns the ftp application was not adapted in a correct way. However this is a fix to avoid kernel errors. In the long term another solution might be chosen. I.e the ports that the ftp appl, uses should be per netns. Signed-off-by: NHans Schillstrom <hans.schillstrom@ericsson.com> Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 25 5月, 2011 3 次提交
-
-
由 Randy Dunlap 提交于
Fix new kernel-doc Error and Warning in <net/mac80211.h>: Error(linux-2.6.39-git5/include/net/mac80211.h:550): cannot understand prototype: 'struct ieee80211_sched_scan_ies ' Warning(linux-2.6.39-git5/include/net/mac80211.h:2289): No description found for parameter 'sta' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Fix new kernel-doc warnings in <net/cfg80211.h>: Warning(linux-2.6.39-git5/include/net/cfg80211.h:560): No description found for parameter 'bss_param' Warning(linux-2.6.39-git5/include/net/cfg80211.h:1555): Enum value 'WIPHY_FLAG_SUPPORTS_SCHED_SCAN' not described in enum 'wiphy_flags' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stephen Hemminger 提交于
Catch cases where dst_metric_set() and other functions are called but _metrics is NULL. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2011 2 次提交
-
-
由 Randy Dunlap 提交于
Fix new kernel-doc Error and Warning in <net/mac80211.h>: Error(linux-2.6.39-git5/include/net/mac80211.h:550): cannot understand prototype: 'struct ieee80211_sched_scan_ies ' Warning(linux-2.6.39-git5/include/net/mac80211.h:2289): No description found for parameter 'sta' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Trivial patch updating documentation in header files only. Error handling of CAIF transmit errors was changed by commit: caif: Don't resend if dev_queue_xmit fails. This patch updates the documentation accordingly. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
ipv6 has per device ICMP SNMP counters, taking too much space because they use percpu storage. needed size per device is : (512+4)*sizeof(long)*number_of_possible_cpus*2 On a 32bit kernel, 16 possible cpus, this wastes more than 64kbytes of memory per ipv6 enabled network device, taken in vmalloc pool. Since ICMP messages are rare, just use shared counters (atomic_long_t) Per network space ICMP counters are still using percpu memory, we might also convert them to shared counters in a future patch. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 5月, 2011 5 次提交
-
-
由 Jouni Malinen 提交于
cfg80211 scan code adds separate BSS entries if the same BSS shows up on multiple channels. However, sme implementation does not use the frequency when fetching the BSS entry. Fix this by adding channel information to cfg80211_roamed() and include it in cfg80211_get_bss() calls. Please note that drivers using cfg80211_roamed() need to be modified to fully implement this fix. This commit includes only minimal changes to avoid compilation issues; it maintains the old (broken) behavior for most drivers. ath6kl was the only one that I could test, so I updated it to provide the operating frequency in the roamed event. Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This will next trickle down to rt_bind_peer(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This way the caller can get at the fully resolved fl4->{daddr,saddr} etc. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It's way past it's usefulness. And this gets rid of a bunch of stray ->rt_{dst,src} references. Even the comment documenting the macro was inaccurate (stated default was 1 when it's 0). If reintroduced, it should be done properly, with dynamic debug facilities. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2011 1 次提交
-
-
由 Vasiliy Kulikov 提交于
If CONFIG_PROC_SYSCTL=n the building process fails: ping.c:(.text+0x52af3): undefined reference to `inet_get_ping_group_range_net' Moved inet_get_ping_group_range_net() to ping.c. Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2011 3 次提交
-
-
由 Yogesh Ashok Powar 提交于
Currently the devices that have already stripped IEEE 802.11 header from the AMSDU SKB can not use ieee80211_amsdu_to_8023s routine. This patch enhances ieee80211_amsdu_to_8023s() API by changing mandatory removing of IEEE 802.11 header from AMSDU to optional. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Javier Cardona 提交于
These definitions need to be exposed now that we can set the peer link states via NL80211_ATTR_STA_PLINK_STATE. They were already being (opaquely) reported by NL80211_STA_INFO_PLINK_STATE. Signed-off-by: NJavier Cardona <javier@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Add the ability to advertise interface combinations in nl80211. This allows the driver to indicate what the combinations are that it supports. "Combinations" of just a single interface are implicit, as previously. Note that cfg80211 will enforce that the restrictions are met, but not for all drivers yet (once all drivers are updated, we can remove the flag and enforce for all). When no combinations are actually supported, an empty list will be exported so that userspace can know if the kernel exported this info or not (although it isn't clear to me what tools using the info should do if the kernel didn't export it). Since some interface types are purely virtual/software and don't fit the restrictions, those are exposed in a new list of pure SW types, not subject to restrictions. This mainly exists to handle AP-VLAN and monitor interfaces in mac80211. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 5月, 2011 8 次提交
-
-
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Do proper handling of dev_queue_xmit errors in order to avoid double free of skb and leaks in error conditions. In cfctrl pending requests are removed when CAIF Link layer goes down. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Use struct net to reference CAIF configuration object instead of static variables. Refactor functions caif_connect_client, caif_disconnect_client and squach files cfcnfg.c and caif_config_utils. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
CAIF Socket Layer and ip-interface registers reference counters in CAIF service layer. The functions sock_hold, sock_put and dev_hold, dev_put are used by CAIF Stack to protect from freeing memory while packets are in-flight. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Instead of having reference counts in caif service layers, we hook into existing refcount handling in socket layer and netdevice. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Introduce Per-cpu reference for lower part of CAIF Stack. Before freeing payload is disabled, synchronize_rcu() is called, and then ref-count verified to be zero. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
RCU read_lock and refcount is used to protect in-flight packets. Use RCU and counters to manage freeing lower part of the CAIF stack if CAIF-link layer is removed. Old solution based on delaying removal of device is removed. When CAIF link layer goes down the use of CAIF link layer is disabled (by calling caif_set_phy_state()), but removal and freeing of the lower part of the CAIF stack is done when Link layer is unregistered. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Replace spin_lock with rcu_read_lock when accessing lists to layers and cache. While packets are in flight rcu_read_lock should not be held, instead ref-counters are used in combination with RCU. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2011 2 次提交
-
-
由 David S. Miller 提交于
Pass in the sk_buff so that we can fetch the necessary keys from the packet header when working with input routes. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vasiliy Kulikov 提交于
This patch adds IPPROTO_ICMP socket kind. It makes it possible to send ICMP_ECHO messages and receive the corresponding ICMP_ECHOREPLY messages without any special privileges. In other words, the patch makes it possible to implement setuid-less and CAP_NET_RAW-less /bin/ping. In order not to increase the kernel's attack surface, the new functionality is disabled by default, but is enabled at bootup by supporting Linux distributions, optionally with restriction to a group or a group range (see below). Similar functionality is implemented in Mac OS X: http://www.manpagez.com/man/4/icmp/ A new ping socket is created with socket(PF_INET, SOCK_DGRAM, PROT_ICMP) Message identifiers (octets 4-5 of ICMP header) are interpreted as local ports. Addresses are stored in struct sockaddr_in. No port numbers are reserved for privileged processes, port 0 is reserved for API ("let the kernel pick a free number"). There is no notion of remote ports, remote port numbers provided by the user (e.g. in connect()) are ignored. Data sent and received include ICMP headers. This is deliberate to: 1) Avoid the need to transport headers values like sequence numbers by other means. 2) Make it easier to port existing programs using raw sockets. ICMP headers given to send() are checked and sanitized. The type must be ICMP_ECHO and the code must be zero (future extensions might relax this, see below). The id is set to the number (local port) of the socket, the checksum is always recomputed. ICMP reply packets received from the network are demultiplexed according to their id's, and are returned by recv() without any modifications. IP header information and ICMP errors of those packets may be obtained via ancillary data (IP_RECVTTL, IP_RETOPTS, and IP_RECVERR). ICMP source quenches and redirects are reported as fake errors via the error queue (IP_RECVERR); the next hop address for redirects is saved to ee_info (in network order). socket(2) is restricted to the group range specified in "/proc/sys/net/ipv4/ping_group_range". It is "1 0" by default, meaning that nobody (not even root) may create ping sockets. Setting it to "100 100" would grant permissions to the single group (to either make /sbin/ping g+s and owned by this group or to grant permissions to the "netadmins" group), "0 4294967295" would enable it for the world, "100 4294967295" would enable it for the users, but not daemons. The existing code might be (in the unlikely case anyone needs it) extended rather easily to handle other similar pairs of ICMP messages (Timestamp/Reply, Information Request/Reply, Address Mask Request/Reply etc.). Userspace ping util & patch for it: http://openwall.info/wiki/people/segoon/ping For Openwall GNU/*/Linux it was the last step on the road to the setuid-less distro. A revision of this patch (for RHEL5/OpenVZ kernels) is in use in Owl-current, such as in the 2011/03/12 LiveCD ISOs: http://mirrors.kernel.org/openwall/Owl/current/iso/ Initially this functionality was written by Pavel Kankovsky for Linux 2.4.32, but unfortunately it was never made public. All ping options (-b, -p, -Q, -R, -s, -t, -T, -M, -I), are tested with the patch. PATCH v3: - switched to flowi4. - minor changes to be consistent with raw sockets code. PATCH v2: - changed ping_debug() to pr_debug(). - removed CONFIG_IP_PING. - removed ping_seq_fops.owner field (unused for procfs). - switched to proc_net_fops_create(). - switched to %pK in seq_printf(). PATCH v1: - fixed checksumming bug. - CAP_NET_RAW may not create icmp sockets anymore. RFC v2: - minor cleanups. - introduced sysctl'able group range to restrict socket(2). Signed-off-by: NVasiliy Kulikov <segoon@openwall.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-