Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This adds in the x3proto and magicpanelr2 mach types, plugs in
highlander and rts7751r2d groups, and also hooks up the r2d
subtypes.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

R7780RP can't do byte-sized accesses to CF, so needs to do word
sized access with low-byte masking. This same problem exists
on older versions of the R2D, with the same workaround having
been implemented in 43f4b8c7
there. Follow that change for the highlander boards.

This does not impact R7780MP or SH7785 based Highlander modules.

If you're unfortunate enough to be stuck with an R7780RP, this
patch is for you!
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

It's assumed that .eh_frame is terminated with 4-byte 0 in shared
libraries and executable.  It seems to be the case for VDSOs too.
Without this terminator, I saw failures when unwinding from VDSO,
though I don't know how other architectures handle this issue.
For the normal libs, crtendS.o gives this terminator.  We can use
such terminating objects.  Or we can add a 4-byte 0 with modifying
the linker script like as the patch below.
Signed-off-by: NKaz Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

When configuring the kernel natively the uname matching is off,
so fix up the uname mangling to get the proper SUBARCH. Needs
an explicit range so that SH-5 doesn't break.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

While using separate IRQ stacks can cut down on stack consumption,
many users can also use 4k stacks directly without the additional
need of separate stacks for soft and hardirqs.

With this split, we support the same rationale for 4KSTACKS as
m68knommu, with the IRQSTACKS abstraction as per ppc64.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

movca.l is restricted to SH-4 and up only, though compilers that
are unable to support ISA tuning (especially older versions of
binutils) will happily compile in the bogus opcode on older parts.

Conditionalize it to fix SH-3 regressions noted by Kristoffer.
Signed-off-by: NStuart Menefy <stuart.menefy@st.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

CPU_HAS_SR_RB is selected by both CPU_SH3 and CPU_SH4, so having a
dependency and default y on those additionally doesn't make much sense.
The select also has to be special cased for CPUs that don't support
this.

This is also something that has been abused too much as a result
of being user-visible, hence the addition of the select in the first
place. So just kill the user-visibility entirely while we're at it.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Converts from the profile notifier to the timer hook. Follows
the generic timer interrupt-based change.

This really wants to be converted to perfmon..
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Some cleanups to the SH linker script. This reorders some of the
data sections for more optimal placement, general tabification,
and plugging in omitted generic definitions.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Follows s390 and others.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

When the SH kernel used to support embedding a ramdisk in the
pre-initramfs days it was placed in a special section and made to
look like a regular initrd. Since that was removed ages ago, kill
off the remaining cruft that was missed.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

memory_end was being clobbered by whatever the kernel config had
specified, rather than obeying the setup option. Fix this up so
that memory_end is only initialized if nothing has been set on
the command line.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The uevent API has changed from 2.6.22 and this patch eliminates
annoying compiler errors

Signed off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Starting with binutils somewhere around 2.17.50.14 the vmlinux file
contains a ".note.gnu.build-id" section which doesn't get removed when
the zImage is built; resulting in a 2GB intermediate file and a broken
zImage.
Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

I'm converting most array size calculations under arch/ to use the
ARRAY_SIZE() macro. This is the (tiny) patch for sh.
Signed-off-by: NAlejandro Martinez Ruiz <alex@flawedcode.org>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

As noted by David:

pte_page() is a macro defined as follows;

    include/asm-sh/pgtable.h
    #define pte_page(x)    phys_to_page(pte_val(x)&PTE_PHYS_MASK)

    include/asm-sh/page.h
    #define phys_to_page(phys)    (pfn_to_page(phys >> PAGE_SHIFT))

So as you can see the phys_to_page() macro doesn't wrap the 'phys'
parameter in parentheses so we end up with;

    pte_val(x)&PTE_PHYS_MASK >> PAGE_SHIFT

Which is not what we wanted as '>>' has a higher precedence than bitwise
AND. I dug into the git repository and I believe this bug was added with
this commit (104b8dea);

2006-03-27 KAMEZAWA Hiroyuki [PATCH] unify pfn_to_page: sh pfn_to_page

-#define phys_to_page(phys)     (mem_map + (((phys)-__MEMORY_START) >>
PAGE_SHIFT))
-#define page_to_phys(page)     (((page - mem_map) << PAGE_SHIFT) +
__MEMORY_START)
+#define phys_to_page(phys)     (pfn_to_page(phys >> PAGE_SHIFT))
+#define page_to_phys(page)     (page_to_pfn(page) << PAGE_SHIFT)
Reported-by: NDavid ADDISON <david.addison@st.com>
Reported-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Remove reference to out of date/rotting websites.
Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch adds support for the ax88796 driver on highlander boards.

Implemented using the 93cx6 EEPROM support introduced by commit-id
89e536a1.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (34 commits)
  [MIPS] tb0219: Update copyright message.
  [MIPS] MT: Fix bug in multithreaded kernels.
  [MIPS] Alchemy: Remove CONFIG_TS_AU1X00_ADS7846 from defconfigs.
  Author: Ralf Baechle <ralf@linux-mips.org>
  [MIPS] sb1250: Enable GenBus IDE in defconfig.
  [MIPS] vmlinux.ld.S: correctly indent .data section
  [MIPS] c-r3k: Implement flush_cache_range()
  [MIPS] Store sign-extend register values for PTRACE_GETREGS
  [MIPS] Alchemy: Register platform devices
  [MIPS] Add len and addr validation for MAP_FIXED mappings.
  [MIPS] IRIX: Fix off-by-one error in signal compat code.
  [MIPS] time: Replace plat_timer_setup with modern APIs.
  [MIPS] time: Fix cut'n'paste bug in Sibyte clockevent driver.
  [MIPS] time: Make c0_compare_int_usable faster
  [MIPS] time: Fix cevt-r4k.c for 64-bit kernel
  [MIPS] Sibyte: Delete {sb1250,bcm1480}_steal_irq().
  [MIPS] txx9tmr clockevent/clocksource driver
  [MIPS] Add mips_hpt_frequency check to mips_clockevent_init().
  [MIPS] IP32: Fixes after interrupt renumbering.
  [MIPS] IP27: Fix slice logic to work for arbitrary number of slices.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: fix style in kernel/sched.c
  sched: fix style of swap() macro in kernel/sched_fair.c
  sched: report CPU usage in CFS cgroup directories
  sched: move rcu_head to task_group struct
  sched: fix incorrect assumption that cpu 0 exists
  sched: keep utime/stime monotonic
  sched: make kernel/sched.c:account_guest_time() static

This reverts commit 2e1c49db.

First off, testing in Fedora has shown it to cause boot failures,
bisected down by Martin Ebourne, and reported by Dave Jobes.  So the
commit will likely be reverted in the 2.6.23 stable kernels.

Secondly, in the 2.6.24 model, x86-64 has now grown support for
SPARSEMEM_VMEMMAP, which disables the relevant code anyway, so while the
bug is not visible any more, it's become invisible due to the code just
being irrelevant and no longer enabled on the only architecture that
this ever affected.
Reported-by: NDave Jones <davej@redhat.com>
Tested-by: NMartin Ebourne <fedora@ebourne.me.uk>
Cc: Zou Nan hai <nanhai.zou@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fallout of recent commits: small coding style fixes.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix style of swap() macro in kernel/sched_fair.c.

( this macro should eventually move to a general header, as ext3 uses
  a similar construct too. )
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Adds a cpu.usage file to the CFS cgroup that reports CPU usage in
milliseconds for that cgroup's tasks

[ mingo@elte.hu: style cleanups. ]
Signed-off-by: NPaul Menage <menage@google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Peter Zijlstra noticed that the rcu_head object need not be present
in every cfs_rq of a group. Move it to the task_group structure
instead.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch:

commit 9b5b7751
Author: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Date:   Mon Oct 15 17:00:09 2007 +0200

    sched: clean up code under CONFIG_FAIR_GROUP_SCHED

Introduced an assumption of the existence of CPU0 via this line

cfs_rq = tg->cfs_rq[0];

If you have no CPU0, that will be NULL.  The fix seems to be just to
take whatever cfs_rq queue comes out of the for_each_possible_cpu()
loop, since they're all equally good for the destruction operation.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

keep utime/stime monotonic.

cpustats use utime/stime as a ratio against sum_exec_runtime, as a
consequence it can happen - when the ratio changes faster than time
accumulates - that either can be appear to go backwards.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

account_guest_time() can become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When GDB writes a breakpoint into address area of inferior process the
kernel needs to invalidate the modified memory in the inferior which
is done by calling flush_cache_page which in turns calls
r4k_flush_cache_page and local_r4k_flush_cache_page for VSMP or SMTC
kernel via r4k_on_each_cpu().

As the VSMP and SMTC SMP kernels for 34K are running on a single shared
caches it is possible to get away without interprocessor function calls.
This optimization is implemented in r4k_on_each_cpu, so
local_r4k_flush_cache_page is only ever called on the local CPU.

This is where the following code in local_r4k_flush_cache_page() strikes:

        /*
         * If ownes no valid ASID yet, cannot possibly have gotten
         * this page into the cache.
         */
        if (cpu_context(smp_processor_id(), mm) == 0)
                return;

On VSMP and SMTC had a function of cpu_context() for each CPU(TC).

So in case another CPU than the CPU executing local_r4k_cache_flush_page
has not accessed the mm but one of the other CPUs has there may be data
to be flushed in the cache yet local_r4k_cache_flush_page will falsely
return leaving the I-cache inconsistent for the breakpoint.

While the issue was discovered with GDB it also exists in
local_r4k_flush_cache_range() and local_r4k_flush_cache().

Fixed by introducing a new function has_valid_asid which on MT kernels
returns true if a mm is active on any processor in the system.

This is relativly expensive since for memory acccesses in that loop
cache misses have to be assumed but it seems the most viable solution
for 2.6.23 and older -stable kernels.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[MIPS] MSP71xx: Fix bitrot.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Enable the onboard GenBus IDE interface in the default configuration.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>